Ableton Forum

the noise you're trying to eliminate is random. if you wanted to eliminate a 10kHz sine wave with a known amplitude that's doable. well, even then there's some dither in the analog to digital sampling that adds randomness to the signal. most sound sources have a lot of tiny randomness to them. even...

isotope rx, waves xnoise, soundforge noise reduction, cool edit has it too
you feed it a bit of just the noise, it will analyze it and remove it from the recording to a certain extent

you could also use cool edit/wavelab spectrum display and do it manually

just do the math and rescale the enveloppe? if 0-8192=0-12 then each semitone is 683 select the whole thing and lower the 8192 points to 683 and it will bend 2 semi on a 12 semi range since clip enveloppe select everything, select all, lower the top to -6827 (it will scale the bend downs) then desel...

my whole set is based on that, 1 midi interface with 1 port (at the moment) and a soundcard with 22 inputs to get all my hardware back in live no need for multiple MIDI outs, just use different channels on each device but i suggest using a thru box, using midi thru from device to device adds 4 ms la...

i made myself max devices for that purpose in my live set, but that would need force mapping

is it normal it takes 50% processor power just to run it? (idle, when i press play my session can't even play)
is it something max6 would fix?
without:

with:

bookmarked

bosonHavoc wrote:

nemoy wrote:I don't have a cat anymore

ya by the looks of that gear you have some cool cats coming over to jam

who needs a cat with a 24 track 2 inch analog and that board?
seriously, if i had this studio, the cat wouldnt even be allowed near the door

why, i just told you how to fix it, why would i cause myself this problem?

make sure "show only automated parameters" is not selected

if the acapella is from a digital source, just warp it by warping the original track while having the acapella selected too, it will put warp markers on both files if it's coming from an LP or analog tape, you will need to match without warping to align the vocals to the original (tape and lp are no...

late 2011 MBP, i7 quad 2,16 4 GB ram 500 GB hd MOTU traveler live 8,2,4 32 samples buffer gives me a I/O (roundtrip) latency of 2,2 ms (and a idle load of 6%, 35% when playing and teaking al knobs i can) which is just ok to play live using live as a mixer and sequencer for my hardware synths and FX ...

Angstrom wrote:The most likely solution

this, low notes like that with non reset phase will start at a non zero crossing point, making a clicking sound

i'm all fo rthis feature, i miss it a lot from logic, i was just saying, even people playing their real instruments can use live for composition, and that feature is a must when composing/arranging

i beg to differ http://soundcloud.com/milfshakers/city- ... lfshakers7