A Gaint Reaktor Multi Slicer Effects Rack
A Gaint Reaktor Multi Slicer Effects Rack
I put this together over the last few months.
here it is...
Master FX Maschine Expanded Ensemble Layout and Guide.
The FX are Chained in this order internally...
R3order, Reverser, Phaser, Grain FX1, Grain FX2, Octave, Spin, BeatLookUp, Multiband Filter, LP Filter, HP Filter, Flanger, Dual Sync Delay, Compressor.
1. R3order v1.2 (originally created by Riccardo Ferri) - This is the first largest part at the top of the screen. Its essentially the same thing as smart electronics suppatrigga but with a refined GUI that gives total control over slices, power down & reverse timings. This is the foundation of stage 1. It can use live input or a sample from the built in sampler which holds 128 samples and can be midi mapped to scroll through samples while playing.
To R3order I added 8 midi mappable sequencers and a list editor that allows you to play through your FX sequences by midi.
The original GUI based slice editor is still in tact but I added the 8 numeric pattern sequencers for midi playability as the GUI editor does not midi map.
I also added the ability to turn the power down and reverse effects off and on independently from the slicer itself.
There are midi mappable controls for all the major functions.
*R3order works 1 bar behind live time-meaning that it has to buffer 1 whole bar before it starts to work and will always end up a bar behind the live input.
2. Then I took several single effect modules from an ensemble called Optimus Rex by Donald Phillips.
they are the following -
The Reverser, Phaser, Grain FX1, Grain FX2, Octave, and Spin modules.
All these effects can be activated instantly in live time.
3. Then I used the heart of BeatLookUp by Chris List as the final slicing stage.
This is a %100 live time playable slicer, reverser and powerdown effect that functions %100 in realtime audio input with instant playing response.
It has a very different type of power than R3order so both were bult together, BeatLookUp is staged last in the major effects/slicing chain to allow for maximum FX overlaps and captures/stutters.
Then there is the filtering stage.
a multi-band (8) filter with band shift, low pass, high pass then a flanger and a dual sync delay and a compressor finish out the audio chain.
Basically this is my little combo masher and a control template for the Maschine Midi hardware from Native Instruments.
thank you to the Reaktor community who built all the hard parts.
Riccardo Ferri - R3order
Donald Phillips - Optimus Rex
Chris List - BeatLookUp
enjoy and Thank you.
http://www.youtube.com/user/michaelohaganmusic
http://www.megaupload.com/?d=BL9C9NAE
this includes the ensemble and a Maschine Hardware Template that is Pre mapped to everything.
here it is...
Master FX Maschine Expanded Ensemble Layout and Guide.
The FX are Chained in this order internally...
R3order, Reverser, Phaser, Grain FX1, Grain FX2, Octave, Spin, BeatLookUp, Multiband Filter, LP Filter, HP Filter, Flanger, Dual Sync Delay, Compressor.
1. R3order v1.2 (originally created by Riccardo Ferri) - This is the first largest part at the top of the screen. Its essentially the same thing as smart electronics suppatrigga but with a refined GUI that gives total control over slices, power down & reverse timings. This is the foundation of stage 1. It can use live input or a sample from the built in sampler which holds 128 samples and can be midi mapped to scroll through samples while playing.
To R3order I added 8 midi mappable sequencers and a list editor that allows you to play through your FX sequences by midi.
The original GUI based slice editor is still in tact but I added the 8 numeric pattern sequencers for midi playability as the GUI editor does not midi map.
I also added the ability to turn the power down and reverse effects off and on independently from the slicer itself.
There are midi mappable controls for all the major functions.
*R3order works 1 bar behind live time-meaning that it has to buffer 1 whole bar before it starts to work and will always end up a bar behind the live input.
2. Then I took several single effect modules from an ensemble called Optimus Rex by Donald Phillips.
they are the following -
The Reverser, Phaser, Grain FX1, Grain FX2, Octave, and Spin modules.
All these effects can be activated instantly in live time.
3. Then I used the heart of BeatLookUp by Chris List as the final slicing stage.
This is a %100 live time playable slicer, reverser and powerdown effect that functions %100 in realtime audio input with instant playing response.
It has a very different type of power than R3order so both were bult together, BeatLookUp is staged last in the major effects/slicing chain to allow for maximum FX overlaps and captures/stutters.
Then there is the filtering stage.
a multi-band (8) filter with band shift, low pass, high pass then a flanger and a dual sync delay and a compressor finish out the audio chain.
Basically this is my little combo masher and a control template for the Maschine Midi hardware from Native Instruments.
thank you to the Reaktor community who built all the hard parts.
Riccardo Ferri - R3order
Donald Phillips - Optimus Rex
Chris List - BeatLookUp
enjoy and Thank you.
http://www.youtube.com/user/michaelohaganmusic
http://www.megaupload.com/?d=BL9C9NAE
this includes the ensemble and a Maschine Hardware Template that is Pre mapped to everything.
Macbook 2.1 GHZ-4GBRam-Live6.0.11-Deckadance-Ultralight MK3-ReMote SL 25-2x Stanton scs3d
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912
Re: A Gaint Reaktor Multi Slicer Effects Rack
This is great work ! thanks for sharing (:
Re: A Gaint Reaktor Multi Slicer Effects Rack
totally cool. can't seem to get the final filter section to effect my sound. Is it like a filter bank?
I have the lfo enabled... not sure what else i'm missing
I have the lfo enabled... not sure what else i'm missing
2.4 ghz Macbook Pro 8gb RAM, SSD, Live 9 Suite, Puremagnetik, Minimal Talent
Re: A Gaint Reaktor Multi Slicer Effects Rack
Looks fun, especially since it's made to work with he Mashine controller. Thanks for putting it together and sharing it. I'm definitely going to check it out. Have you shared it over at he NI Maschine forum? I'm sure there are Reaktor using Maschine users there who would love to try it out.
Re: A Gaint Reaktor Multi Slicer Effects Rack
the multi freq knob is a freq shift control for the multiband filter that needs to be activated by the "Pad" button labeled fil on/off.
its the 3rd row up and the third button in from the left, activate that and then the knob shifts around the multibands freq.
same with the spin control, it has to be activated by the pad button and then the knob has an effect.
its the 3rd row up and the third button in from the left, activate that and then the knob shifts around the multibands freq.
same with the spin control, it has to be activated by the pad button and then the knob has an effect.
Macbook 2.1 GHZ-4GBRam-Live6.0.11-Deckadance-Ultralight MK3-ReMote SL 25-2x Stanton scs3d
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912
Re: A Gaint Reaktor Multi Slicer Effects Rack
I am updating this to have all extra parameters available on page B for further refinement.
also be careful when midi mapping as the grain fx's and phaser and fil on off pads all have a second hidden control internally to attenuate for volume fluctuations.
I'll post up an updated version with a more useful page B in a few days.
also be careful when midi mapping as the grain fx's and phaser and fil on off pads all have a second hidden control internally to attenuate for volume fluctuations.
I'll post up an updated version with a more useful page B in a few days.
Macbook 2.1 GHZ-4GBRam-Live6.0.11-Deckadance-Ultralight MK3-ReMote SL 25-2x Stanton scs3d
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912
Re: A Gaint Reaktor Multi Slicer Effects Rack
interesting.. thanks..
-
- Posts: 518
- Joined: Mon May 18, 2009 5:33 pm
Re: A Gaint Reaktor Multi Slicer Effects Rack
...CooL...!!!
Thanks a Lot !!!
Thanks a Lot !!!
No! I'll never use the Push-App Live 9 !!!
Re: A Gaint Reaktor Multi Slicer Effects Rack
sorry to be such a n00b, but i cant really figure out how to work all this...tried looking up the original parts on NI reaktor forum, but still dont totally get it...especially the first r3order part...how do you assign what effect to what slice on the sequencers?
anyway thanks for the upload...
anyway thanks for the upload...
Re: A Gaint Reaktor Multi Slicer Effects Rack
Cool. Thanks!
Re: A Gaint Reaktor Multi Slicer Effects Rack
only powerdown and reverse FX are tied to R3order, they are controlled by the little graph with the up/down steps just below the main grid/graph - then the bottom graph of the 3 controls volume gating in r3order, the other pad controlled FX are not tied to r3order at all.bertzerk wrote:sorry to be such a n00b, but i cant really figure out how to work all this...tried looking up the original parts on NI reaktor forum, but still dont totally get it...especially the first r3order part...how do you assign what effect to what slice on the sequencers?
anyway thanks for the upload...
r3order is self contained from the rest of the FX.
Macbook 2.1 GHZ-4GBRam-Live6.0.11-Deckadance-Ultralight MK3-ReMote SL 25-2x Stanton scs3d
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912
Re: A Gaint Reaktor Multi Slicer Effects Rack
___
Last edited by db120 on Wed Oct 27, 2010 2:33 am, edited 1 time in total.
Re: A Gaint Reaktor Multi Slicer Effects Rack
Very interesting. Looking forward to trying it out with Maschine this weekend.
Re: A Gaint Reaktor Multi Slicer Effects Rack
how does the reorder grid interact with the midi mappable knobs? which one actually does the re-ordering?
it feels like everything gets reordering twice, once in teh grid, once with the knobs. is this correct?
it feels like everything gets reordering twice, once in teh grid, once with the knobs. is this correct?
2.4 ghz Macbook Pro 8gb RAM, SSD, Live 9 Suite, Puremagnetik, Minimal Talent
Re: A Gaint Reaktor Multi Slicer Effects Rack
yes, this is correct, the grid and the knobs can both interact/interfere with each other.Jekblad wrote:how does the reorder grid interact with the midi mappable knobs? which one actually does the re-ordering?
it feels like everything gets reordering twice, once in teh grid, once with the knobs. is this correct?
I left it this way so that the grid could be used in the studio while all the midi mappable knobs and sequence list can be used live via midi.
Macbook 2.1 GHZ-4GBRam-Live6.0.11-Deckadance-Ultralight MK3-ReMote SL 25-2x Stanton scs3d
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912
http://soundcloud.com/michael-ohagan
http://www.youtube.com/michaelohaganmusic
unitedaudioartists@hotmail.com
http://www.myspace.com/michaelohagan912