EQ8 3 band DJ EQ settings pack-DJM,DDM, A&H Xone 42 & 92 etc

[mike_o]

someone over at DJ techtools posted the specs on a bunch of DJ mixers internal EQ freq settings, here they are.

3 Band EQ's:

DJM low: 70hz
DJM mid: 1000hz
DJM high: 13000hz

X:42 low: 420hz
X:42 mid: 1200hz
X:42 high: 2700hz

X4D low: 120hz
X4D mid: 1400hz
X4D high: 10000hz

Rane low: 300hz
Rane mid: 1200hz
Rane high: 4000hz

DDM low: 330hz
DDM mid: 1400hz
DDM high: 4200hz

Allen & Heath - 4 Band EQ's:
X:92 low: 100hz
X:92 low-mid: 250hz
X:92 high-mid: 2500hz
X:92 high: 10000hz

so I made a set of EQ8 racks that match these frequency settings.

here...

http://www.megaupload.com/?d=ANOVP3Z5

I cant remember who posted this info there but thanks to whoever they are.

[ARDJ]

great post man, i had made one based on the DJM800 years back, it's wild to see the differences between all the mixers...

[Majex]

many thanks for re-posting this, a good little resource.

[eddiex]

is it weird that only 1 of those 6 mixers has a lower frequency than 100hz?
excuse me if i don't get it ...but i would think that a dj mixer would have a lower frequency range?

[Tarekith]

Just a note, the Xone manual states the cutoff points, but when you look at them on a spectrum analyzer, the actual cutoff points are different. I modelled the Xone mixer with EQ 8 as well for this pack:

http://tarekith.com/assets/TarekithDJEFXv8.zip

I had to use quite a few different analysis tools to match the phase and EQ curves, very complicated to set up.

[Commander Cody]

thanks Eric for the freebie....us lazy people love you!