All times are UTC

 
 



Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Wed Mar 20, 2013 9:01 pm 

Joined: Tue Feb 20, 2007 11:10 pm
Posts: 9959
get'em while they're hot!
:twisted:

http://beatwise.proboards.com/index.cgi ... age=1#9837

http://beatwise.proboards.com/index.cgi ... hread=1315

http://beatwise.proboards.com/index.cgi ... age=1#9838

and ALSO
modified PUSH script mod that adds the following:
- Allows Drum Mode to work on Drum Racks that are nested inside of Instrument Racks.
This will apply to the first nested Drum Rack.
- Allows step-sequencer input to be velocity-sensitive so that steps turned on will have the velocity that the corresponding button sent.

https://www.box.com/s/lxpem3jnnqgl0in742sn

_________________
Image


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Wed Mar 20, 2013 9:47 pm 

Joined: Tue Dec 22, 2009 7:05 pm
Posts: 360
good man! Care to do a write up about what aspects of the push scripts you modified?


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Wed Mar 20, 2013 9:59 pm 

Joined: Tue Feb 20, 2007 11:10 pm
Posts: 9959
I didn't .. I'm not a part of this.. however I do use the LP-ditto script..

_________________
Image


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Wed Mar 20, 2013 10:51 pm 

Joined: Tue Dec 22, 2009 7:05 pm
Posts: 360
ahh, i see, well thanks for sharing, at the least!


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 12:44 am 

Joined: Thu Mar 07, 2013 1:58 am
Posts: 101
Cool! Now if only I had my hands on a PUSH :D

I love the fact that the product hasn't even officially shipped yet and its already getting hacked and modified. This type of community offerings is one of the reasons I chose Ableton over other DAWs.


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 12:58 am 

Joined: Sun Oct 21, 2007 7:28 pm
Posts: 164
cyclicAMP wrote:
Cool! Now if only I had my hands on a PUSH :D

I love the fact that the product hasn't even officially shipped yet and its already getting hacked and modified.

The script being talked about here is for the Launchpad though, right?


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 1:01 am 

Joined: Thu Mar 07, 2013 1:58 am
Posts: 101
I was referring to the modified PUSH script.


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 3:45 am 

Joined: Fri Oct 14, 2005 1:29 am
Posts: 4369
Location: The Ableton Live Forum
Awesome! These are the very two things that I was wishing for with Push before even getting it! Nice!

_________________
Professional Shark Jumper.


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 3:25 pm 

Joined: Tue Mar 13, 2007 3:28 pm
Posts: 251
Thanks for spreading the word, 3dot.

Also, just for the sake of clarity, virtually any controller can emulate Push. Instructions and docs are available in the 3rd link 3dot posted.
lo.key wrote:
good man! Care to do a write up about what aspects of the push scripts you modified?

There really isn't much to it. For the first modification, the script only looked for Drum Racks that weren't nested, so I simply modified it to check inside of Instrument Racks. For the second modification, the script ignored velocity from the pads used to activate steps and strictly used a default velocity (100) or accented velocity (127). I modified it so that the velocity from the pads isn't ignored and the default velocity is never used. For the technically-minded, the modifications I posted are *.py files, so you can take a look and see how I did these things. Changes I made are all commented.

_________________
http://www.nativekontrol.com


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 3:34 pm 

Joined: Tue Dec 22, 2009 7:05 pm
Posts: 360
metastatik wrote:
There really isn't much to it. For the first modification, the script only looked for Drum Racks that weren't nested, so I simply modified it to check inside of Instrument Racks. For the second modification, the script ignored velocity from the pads used to activate steps and strictly used a default velocity (100) or accented velocity (127). I modified it so that the velocity from the pads isn't ignored and the default velocity is never used. For the technically-minded, the modifications I posted are *.py files, so you can take a look and see how I did these things. Changes I made are all commented.



Thanks Metastatik, i grokked what you did, just wasnt sure which of the .py files you actually modified for this. I'll just dig through them looking for your comments then.


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 3:48 pm 

Joined: Tue Mar 13, 2007 3:28 pm
Posts: 251
There's just two *.py files in the zip I posted.

Push.py - Contains the changes related to Drum Racks in Instrument Racks.
NoteEditorComponent.py - Contains the changes related to step-sequencer velocity. You'll also notice that this has some changes related to assertions as I couldn't get Live to compile it with the original assertions in place.

_________________
http://www.nativekontrol.com


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 4:40 pm 

Joined: Tue Aug 30, 2011 8:51 pm
Posts: 257
metastatik wrote:
For the second modification, the script ignored velocity from the pads used to activate steps and strictly used a default velocity (100) or accented velocity (127).


Whoa, I guess I have been mixing up accented notes with ghosted notes.. it would be more helpful for me to place notes that have a velocity of like 70-80 to achieve ghost notes, and that is what I assumed accented notes were :oops: .. Well with this mod I guess I can do that can't I? just hit the pad softly when punching in my notes!

Thanks again for all your hard work, can't wait to get my Push! But I don't need to because I can use the APC40 to emulate! WUUUUT, so dope!

_________________
Image


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 5:09 pm 

Joined: Fri Oct 22, 2010 9:43 pm
Posts: 377
Location: vienna
metastatik wrote:
There's just two *.py files in the zip I posted.

Push.py - Contains the changes related to Drum Racks in Instrument Racks.
NoteEditorComponent.py - Contains the changes related to step-sequencer velocity. You'll also notice that this has some changes related to assertions as I couldn't get Live to compile it with the original assertions in place.


as usual: you are the best
just one question: do you already own push?

_________________
http://www.soundcloud.com/miomoi (for dirty bassmusic lovers)
[url]http://www.soundcloud.com/flicflac [url] (deep house project)
http://www.youtube.com/user/stoersignal25 (ableton live+maxforlive tutorials)


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 7:18 pm 

Joined: Tue Mar 13, 2007 3:28 pm
Posts: 251
stoersignal wrote:
just one question: do you already own push?

Not yet, I have it on pre-order though.

_________________
http://www.nativekontrol.com


Top
 Profile  
 
 Post subject: Re: PUSH via LPC- - ditto / apC-Carbon
PostPosted: Thu Mar 21, 2013 9:37 pm 

Joined: Fri Oct 22, 2010 9:43 pm
Posts: 377
Location: vienna
metastatik wrote:
stoersignal wrote:
just one question: do you already own push?

Not yet, I have it on pre-order though.


as i thought, but that`s the reason why you are so awesome :lol: you`re expanding the features of harware which isn`t even available yet . unbelievable

_________________
http://www.soundcloud.com/miomoi (for dirty bassmusic lovers)
[url]http://www.soundcloud.com/flicflac [url] (deep house project)
http://www.youtube.com/user/stoersignal25 (ableton live+maxforlive tutorials)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2  Next

All times are UTC

 
 

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group