Live devices mapping in Push:Community mapping is done! :)

[TomViolenz]

Yeah, i was being lazy

Well, it was your turn

BTW: I was just trying to set it all up with just the Sampler mapping changed, but found out that I don't really have a way to check if it is working right now. I don't have Push yet and the Nocturn supposedly does banking, but I can't get it to work through that damn Automap

If anyone with Push wants to try, I can send him the altered device.py and instructions what to do. It's all reversible, so don't worry

[TomViolenz]

OK guys, who wants to try can do the following:

Check the standard setting for Sampler and Arpeggiator in Push and write it down.

Copy the code in the code box below, and past it in an empty text editor window (While the text is still selected in the text editor go to styles and choose "standard" to remove any formatting the forum software might have added).
Save the file under devices.py (Check that no .txt endig got added after you saved - if it did, just remove it.)

Goto: Applications/Live9
right click: show package contents:
Goto: Contents/App-Resources/Midi Remote Scripts/_Generic
Drop your file there and remove the devices.pyc file in this location and back it up to a save location!
Restart Live

Look if the Mapping for Sampler and the Arpeggiator have changed.

Code: Select all

#Embedded file name: /Users/versonator/Hudson/live/Projects/AppLive/Resources/MIDI Remote Scripts/_Generic/Devices.py
from functools import partial
from _Framework.Util import group
RCK_BANK1 = ('Macro 1', 'Macro 2', 'Macro 3', 'Macro 4', 'Macro 5', 'Macro 6', 'Macro 7', 'Macro 8')
RCK_BANKS = (RCK_BANK1,)
RCK_BOBS = (RCK_BANK1,)
RCK_BNK_NAMES = ('Macros',)
ALG_BANK1 = ('OSC1 Level', 'OSC1 Octave', 'OSC1 Semi', 'OSC1 Shape', 'OSC2 Level', 'OSC2 Octave', 'OSC2 Semi', 'OSC2 Shape')
ALG_BANK2 = ('OSC1 Balance', 'F1 Freq', 'F1 Resonance', 'F1 Type', 'OSC2 Balance', 'F2 Freq', 'F2 Resonance', 'F2 Type')
ALG_BANK3 = ('FEG1 Attack', 'FEG1 Decay', 'FEG1 Sustain', 'FEG1 Rel', 'FEG2 Attack', 'FEG2 Decay', 'FEG2 Sustain', 'FEG2 Rel')
ALG_BANK4 = ('F1 On/Off', 'F1 Freq < LFO', 'F1 Freq < Env', 'F1 Res < LFO', 'F2 On/Off', 'F2 Freq < LFO', 'F2 Freq < Env', 'F2 Res < LFO')
ALG_BANK5 = ('AEG1 Attack', 'AEG1 Decay', 'AEG1 Sustain', 'AEG1 Rel', 'AEG2 Attack', 'AEG2 Decay', 'AEG2 Sustain', 'AEG2 Rel')
ALG_BANK6 = ('AMP1 Level', 'AMP1 Pan', 'LFO1 Shape', 'LFO1 Speed', 'AMP2 Level', 'AMP2 Pan', 'LFO2 Shape', 'LFO2 Speed')
ALG_BANK7 = ('Volume', 'Noise On/Off', 'Noise Level', 'Noise Color', 'Unison On/Off', 'Unison Detune', 'Vib On/Off', 'Vib Amount')
ALG_BOB = ('F1 Freq', 'F1 Resonance', 'OSC1 Shape', 'OSC1 Octave', 'OSC2 Shape', 'OSC2 Octave', 'OSC2 Detune', 'Volume')
ALG_BANKS = (ALG_BANK1,
 ALG_BANK2,
 ALG_BANK3,
 ALG_BANK4,
 ALG_BANK5,
 ALG_BANK6,
 ALG_BANK7)
ALG_BOBS = (ALG_BOB,)
ALG_BNK_NAMES = ('Oscillators', 'Filters', 'Filter Envelopes', 'Filter Modulation', 'Volume Envelopes', 'Mix', 'Output')
COL_BANK1 = ('Mallet On/Off', 'Mallet Volume', 'Mallet Noise Amount', 'Mallet Stiffness', 'Mallet Noise Color', '', '', '')
COL_BANK2 = ('Noise Volume', 'Noise Filter Type', 'Noise Filter Freq', 'Noise Filter Q', 'Noise Attack', 'Noise Decay', 'Noise Sustain', 'Noise Release')
COL_BANK3 = ('Res 1 Decay', 'Res 1 Material', 'Res 1 Type', 'Res 1 Quality', 'Res 1 Tune', 'Res 1 Fine Tune', 'Res 1 Pitch Env.', 'Res 1 Pitch Env. Time')
COL_BANK4 = ('Res 1 Listening L', 'Res 1 Listening R', 'Res 1 Hit', 'Res 1 Brightness', 'Res 1 Inharmonics', 'Res 1 Radius', 'Res 1 Opening', 'Res 1 Ratio')
COL_BANK5 = ('Res 2 Decay', 'Res 2 Material', 'Res 2 Type', 'Res 2 Quality', 'Res 2 Tune', 'Res 2 Fine Tune', 'Res 2 Pitch Env.', 'Res 2 Pitch Env. Time')
COL_BANK6 = ('Res 2 Listening L', 'Res 2 Listening R', 'Res 2 Hit', 'Res 2 Brightness', 'Res 2 Inharmonics', 'Res 2 Radius', 'Res 2 Opening', 'Res 2 Ratio')
COL_BOB = ('Res 1 Brightness', 'Res 1 Type', 'Mallet Stiffness', 'Mallet Noise Amount', 'Res 1 Inharmonics', 'Res 1 Decay', 'Res 1 Tune', 'Volume')
COL_BANKS = (COL_BANK1,
 COL_BANK2,
 COL_BANK3,
 COL_BANK4,
 COL_BANK5,
 COL_BANK6)
COL_BOBS = (COL_BOB,)
COL_BNK_NAMES = ('Mallet', 'Noise', 'Resonator 1, Set A', 'Resonator 1, Set B', 'Resonator 2, Set A', 'Resonator 2, Set B')
ELC_BANK1 = ('M Stiffness', 'M Force', 'Noise Pitch', 'Noise Decay', 'Noise Amount', 'F Tine Color', 'F Tine Decay', 'F Tine Vol')
ELC_BANK2 = ('F Tone Decay', 'F Tone Vol', 'F Release', 'Damp Tone', 'Damp Balance', 'Damp Amount', '', '')
ELC_BANK3 = ('P Symmetry', 'P Distance', 'P Amp In', 'P Amp Out', 'Pickup Model', '', '', '')
ELC_BANK4 = ('M Stiff < Vel', 'M Stiff < Key', 'M Force < Vel', 'M Force < Key', 'Noise < Key', 'F Tine < Key', 'P Amp < Key', '')
ELC_BANK5 = ('Volume', 'Voices', 'Semitone', 'Detune', 'KB Stretch', 'PB Range', '', '')
ELC_BOB = ('M Stiffness', 'M Force', 'Noise Amount', 'F Tine Vol', 'F Tone Vol', 'F Release', 'P Symmetry', 'Volume')
ELC_BANKS = (ELC_BANK1,
 ELC_BANK2,
 ELC_BANK3,
 ELC_BANK4,
 ELC_BANK5)
ELC_BOBS = (ELC_BOB,)
ELC_BNK_NAMES = ('Mallet and Tine', 'Tone and Damper', 'Pickup', 'Modulation', 'Global')
IMP_BANK1 = ('1 Start', '1 Transpose', '1 Stretch Factor', '1 Saturator Drive', '1 Filter Freq', '1 Filter Res', '1 Pan', '1 Volume')
IMP_BANK2 = ('2 Start', '2 Transpose', '2 Stretch Factor', '2 Saturator Drive', '2 Filter Freq', '2 Filter Res', '2 Pan', '2 Volume')
IMP_BANK3 = ('3 Start', '3 Transpose', '3 Stretch Factor', '3 Saturator Drive', '3 Filter Freq', '3 Filter Res', '3 Pan', '3 Volume')
IMP_BANK4 = ('4 Start', '4 Transpose', '4 Stretch Factor', '4 Saturator Drive', '4 Filter Freq', '4 Filter Res', '4 Pan', '4 Volume')
IMP_BANK5 = ('5 Start', '5 Transpose', '5 Stretch Factor', '5 Saturator Drive', '5 Filter Freq', '5 Filter Res', '5 Pan', '5 Volume')
IMP_BANK6 = ('6 Start', '6 Transpose', '6 Stretch Factor', '6 Saturator Drive', '6 Filter Freq', '6 Filter Res', '6 Pan', '6 Volume')
IMP_BANK7 = ('7 Start', '7 Transpose', '7 Stretch Factor', '7 Saturator Drive', '7 Filter Freq', '7 Filter Res', '7 Pan', '7 Volume')
IMP_BANK8 = ('8 Start', '8 Transpose', '8 Stretch Factor', '8 Saturator Drive', '8 Filter Freq', '8 Filter Res', '8 Pan', '8 Volume')
IMP_BOB = ('Global Time', 'Global Transpose', '1 Transpose', '2 Transpose', '3 Transpose', '4 Transpose', '5 Transpose', '6 Transpose')
IMP_BANKS = (IMP_BANK1,
 IMP_BANK2,
 IMP_BANK3,
 IMP_BANK4,
 IMP_BANK5,
 IMP_BANK6,
 IMP_BANK7,
 IMP_BANK8)
IMP_BOBS = (IMP_BOB,)
IMP_BNK_NAMES = ('Pad 1', 'Pad 2', 'Pad 3', 'Pad 4', 'Pad 5', 'Pad 6', 'Pad 7', 'Pad 8')
OPR_BANK1 = ('Ae Attack', 'Ae Decay', 'Ae Sustain', 'Ae Release', 'A Coarse', 'A Fine', 'Osc-A Lev < Vel', 'Osc-A Level')
OPR_BANK2 = ('Be Attack', 'Be Decay', 'Be Sustain', 'Be Release', 'B Coarse', 'B Fine', 'Osc-B Lev < Vel', 'Osc-B Level')
OPR_BANK3 = ('Ce Attack', 'Ce Decay', 'Ce Sustain', 'Ce Release', 'C Coarse', 'C Fine', 'Osc-C Lev < Vel', 'Osc-C Level')
OPR_BANK4 = ('De Attack', 'De Decay', 'De Sustain', 'De Release', 'D Coarse', 'D Fine', 'Osc-D Lev < Vel', 'Osc-D Level')
OPR_BANK5 = ('Le Attack', 'Le Decay', 'Le Sustain', 'Le Release', 'LFO Rate', 'LFO Amt', 'LFO Type', 'LFO R < K')
OPR_BANK6 = ('Fe Attack', 'Fe Decay', 'Fe Sustain', 'Fe Release', 'Filter Freq', 'Filter Res', 'Fe R < Vel', 'Fe Amount')
OPR_BANK7 = ('Pe Attack', 'Pe Decay', 'Pe Sustain', 'Pe Release', 'Pe Init', 'Glide Time', 'Pe Amount', 'Spread')
OPR_BANK8 = ('Time < Key', 'Panorama', 'Pan < Key', 'Pan < Rnd', 'Algorithm', 'Time', 'Tone', 'Volume')
OPR_BOB = ('Filter Freq', 'Filter Res', 'A Coarse', 'A Fine', 'B Coarse', 'B Fine', 'Osc-B Level', 'Volume')
OPR_BANKS = (OPR_BANK1,
 OPR_BANK2,
 OPR_BANK3,
 OPR_BANK4,
 OPR_BANK5,
 OPR_BANK6,
 OPR_BANK7,
 OPR_BANK8)
OPR_BOBS = (OPR_BOB,)
OPR_BNK_NAMES = ('Oscillator A', 'Oscillator B', 'Oscillator C', 'Oscillator D', 'LFO', 'Filter', 'Pitch Modulation', 'Routing')
SAM_BANK1 = ('Transpose', 'Spread', 'Pe Init', 'Pe Peak', 'Pe Attack', 'Pe Decay', 'Pe Sustain', 'Pe Release')
SAM_BANK2 = ('Filter Type', 'Filter Freq', 'Filter Res', 'Filter Morph', 'Filt < Vel', 'Shaper Pre-Filter', 'Shaper Type', 'Shaper Amt')
SAM_BANK3 = ('Fe < Env', 'Fe End', 'Fe Init', 'Fe Peak', 'Fe Attack', 'Fe Decay', 'Fe Sustain', 'Fe Release')
SAM_BANK4 = ('O Type', 'O Volume', 'O Fix Freq', 'O Fix Freq Mul', 'Oe Attack', 'Oe Decay', 'Oe Sustain', 'Oe Release')
SAM_BANK5 = ('L 1 Wave', 'L 1 Sync', 'L 1 Rate', 'L 1 Sync Rate', 'Vol < LFO', 'Pan < LFO', 'Filt < LFO', 'Pitch < LFO')
SAM_BANK6 = ('L 2 Wave', 'L 2 Sync', 'L 2 Sync Rate', 'L 2 Rate', 'L 2 Offset', 'L 2 St Mode', 'L 2 Spin', 'L 2 Phase')
SAM_BANK7 = ('L 3 Wave', 'L 3 Sync', 'L 3 Sync Rate', 'L 3 Rate', 'L 3 Offset', 'L 3 St Mode', 'L 3 Spin', 'L 3 Phase')
SAM_BANK8 = ('Time', 'Ae End', 'Ae Init', 'Ae Peak', 'Ae Attack', 'Ae Decay', 'Ae Sustain', 'Ae Release')
SAM_BOB = ('Volume', 'Sample Selector', 'Ve Init', 'Ve Peak', 'Ve Attack', 'Ve Decay', 'Ve Sustain', 'Ve Release')
SAM_BANKS = (SAM_BANK1,
 SAM_BANK2,
 SAM_BANK3,
 SAM_BANK4,
 SAM_BANK5,
 SAM_BANK6,
 SAM_BANK7,
 SAM_BANK8)
SAM_BOBS = (SAM_BOB,)
SAM_BNK_NAMES = ('Pitch', 'Filter', 'Filter Envelope', 'Oscillator', 'LFO 1', 'LFO 2', 'LFO 3', 'Aux Envelope')
SIM_BANK1 = ('Ve Attack', 'Ve Decay', 'Ve Sustain', 'Ve Release', 'S Start', 'S Loop Length', 'S Length', 'S Loop Fade')
SIM_BANK2 = ('Fe Attack', 'Fe Decay', 'Fe Sustain', 'Fe Release', 'Filter Freq', 'Filter Res', 'Filt < Vel', 'Fe < Env')
SIM_BANK3 = ('L Attack', 'L Rate', 'L R < Key', 'L Wave', 'Vol < LFO', 'Filt < LFO', 'Pitch < LFO', 'Pan < LFO')
SIM_BANK4 = ('Pe Attack', 'Pe Decay', 'Pe Sustain', 'Pe Release', 'Glide Time', 'Spread', 'Pan', 'Volume')
SIM_BOB = ('Filter Freq', 'Filter Res', 'S Start', 'S Length', 'Ve Attack', 'Ve Release', 'Transpose', 'Volume')
SIM_BANKS = (SIM_BANK1,
 SIM_BANK2,
 SIM_BANK3,
 SIM_BANK4)
SIM_BOBS = (SIM_BOB,)
SIM_BNK_NAMES = ('Amplitude', 'Filter', 'LFO', 'Pitch Modifiers')
TNS_BANK1 = ('Excitator Type', 'String Decay', 'Str Inharmon', 'Str Damping', 'Exc ForceMassProt', 'Exc FricStiff', 'Exc Velocity', 'E Pos')
TNS_BANK2 = ('Damper On', 'Damper Mass', 'D Stiffness', 'D Velocity', 'Damp Pos', 'D Damping', 'D Pos < Vel', 'D Pos Abs')
TNS_BANK3 = ('Term On/Off', 'Term Mass', 'Term Fng Stiff', 'Term Fret Stiff', 'Pickup On/Off', 'Pickup Pos', 'T Mass < Vel', 'T Mass < Key')
TNS_BANK4 = ('Body On/Off', 'Body Type', 'Body Size', 'Body Decay', 'Body Low-Cut', 'Body High-Cut', 'Body Mix', 'Volume')
TNS_BANK5 = ('Vibrato On/Off', 'Vib Delay', 'Vib Fade-In', 'Vib Speed', 'Vib Amount', 'Vib < ModWh', 'Vib Error', 'Volume')
TNS_BANK6 = ('Filter On/Off', 'Filter Type', 'Filter Freq', 'Filter Reso', 'Freq < Env', 'Freq < LFO', 'Reso < Env', 'Reso < LFO')
TNS_BANK7 = ('FEG On/Off', 'FEG Attack', 'FEG Decay', 'FEG Sustain', 'FEG Release', 'LFO On/Off', 'LFO Shape', 'LFO Speed')
TNS_BANK8 = ('Unison On/Off', 'Uni Detune', 'Porta On/Off', 'Porta Time', 'Voices', 'Octave', 'Semitone', 'Volume')
TNS_BOB = ('Filter Freq', 'Filter Reso', 'Filter Type', 'Excitator Type', 'E Pos', 'String Decay', 'Str Damping', 'Volume')
TNS_BANKS = (TNS_BANK1,
 TNS_BANK2,
 TNS_BANK3,
 TNS_BANK4,
 TNS_BANK5,
 TNS_BANK6,
 TNS_BANK7,
 TNS_BANK8)
TNS_BOBS = (TNS_BOB,)
TNS_BNK_NAMES = ('Excitator and String', 'Damper', 'Termination and Pickup', 'Body', 'Vibrato', 'Filter', 'Envelope and LFO', 'Global')
ARP_BANK1 = ('Style', 'Groove', 'Offset', ''Hold On'', '', '', '', '')
ARP_BANK2 = ('Sync On', 'Free Rate', 'Synced Rate', 'Gate', 'Retrigger Mode', 'Ret. Interval', 'Repeats', '')
ARP_BANK3 = ('Tranpose Mode', 'Tranpose Key', 'Transp. Steps', 'Transp. Dist.', 'Velocity Decay', 'Velocity Target', 'Velocity On', 'Vel. Retrigger')
ARP_BOB = ('Sync On', 'Free Rate', 'Synced Rate', 'Gate', 'Groove', 'Transp. Steps', 'Transp. Dist.', 'Velocity Decay')
ARP_BANKS = (ARP_BANK1, ARP_BANK2, ARP_BANK3)
ARP_BOBS = (ARP_BOB,)
ARP_BNK_NAMES = ('Style', 'Rate/Retrigger', 'Transpose/Velocity')
CRD_BANK1 = ('Shift1', 'Shift2', 'Shift3', 'Shift4', 'Shift5', 'Shift6', '', '')
CRD_BANK2 = ('Velocity1', 'Velocity2', 'Velocity3', 'Velocity4', 'Velocity5', 'Velocity6', '', '')
CRD_BOB = ('Shift1', 'Shift2', 'Shift3', 'Shift4', 'Shift5', 'Velocity5', 'Shift6', 'Velocity6')
CRD_BANKS = (CRD_BANK1, CRD_BANK2)
CRD_BOBS = (CRD_BOB,)
CRD_BNK_NAMES = ('Shift', 'Shift %')
NTL_BANK1 = ('Sync On', 'Time Length', 'Synced Length', 'Gate', 'On/Off-Balance', 'Decay Time', 'Decay Key Scale', '')
NTL_BANKS = (NTL_BANK1,)
NTL_BOBS = (NTL_BANK1,)
PIT_BANK1 = ('Pitch', 'Range', 'Lowest', '', '', '', '', '')
PIT_BANKS = (PIT_BANK1,)
PIT_BOBS = (PIT_BANK1,)
RND_BANK1 = ('Chance', 'Choices', 'Scale', 'Sign', '', '', '', '')
RND_BANKS = (RND_BANK1,)
RND_BOBS = (RND_BANK1,)
SCL_BANK1 = ('Base', 'Transpose', 'Range', 'Lowest', '', '', '', '')
SCL_BANKS = (SCL_BANK1,)
SCL_BOBS = (SCL_BANK1,)
VEL_BANK1 = ('Drive', 'Compand', 'Random', 'Mode', 'Out Hi', 'Out Low', 'Range', 'Lowest')
VEL_BANKS = (VEL_BANK1,)
VEL_BOBS = (VEL_BANK1,)
AMP_BANK1 = ('Amp Type', 'Bass', 'Middle', 'Treble', 'Presence', 'Gain', 'Volume', 'Dry/Wet')
AMP_BANK2 = ('Dual Mono', '', '', '', '', '', '', '')
AMP_BANKS = (AMP_BANK1, AMP_BANK2)
AMP_BOBS = (AMP_BANK1,)
AMP_BNK_NAMES = ('Global', 'Dual Mono')
AFL_BANK1 = ('Frequency', 'Resonance', 'Env. Attack', 'Env. Release', 'Env. Modulation', 'LFO Amount', 'LFO Frequency', 'LFO Phase')
AFL_BANK2 = ('Filter Type', 'LFO Quantize On', 'LFO Quantize Rate', 'LFO Stereo Mode', 'LFO Spin', 'LFO Sync', 'LFO Sync Rate', 'LFO Offset')
AFL_BANK3 = ('', '', '', '', '', 'Ext. In On', 'Ext. In Mix', 'Ext. In Gain')
AFL_BOB = ('Frequency', 'Resonance', 'Filter Type', 'Env. Modulation', 'LFO Amount', 'LFO Waveform', 'LFO Frequency', 'LFO Phase')
AFL_BANKS = (AFL_BANK1, AFL_BANK2, AFL_BANK3)
AFL_BOBS = (AFL_BOB,)
AFL_BNK_NAMES = ('Filter', 'Filter Extra', 'Side Chain')
APN_BANK1 = ('Frequency', 'Phase', 'Shape', 'Waveform', 'Sync Rate', 'Offset', 'Width (Random)', 'Amount')
APN_BANKS = (APN_BANK1,)
APN_BOBS = (APN_BANK1,)
BRP_BANK1 = ('Interval', 'Offset', 'Grid', 'Variation', 'Filter Freq', 'Filter Width', 'Volume', 'Decay')
BRP_BANK2 = ('Chance', 'Gate', 'Pitch', 'Pitch Decay', 'Filter Freq', 'Filter Width', 'Volume', 'Decay')
BRP_BOB = ('Grid', 'Interval', 'Offset', 'Gate', 'Pitch', 'Pitch Decay', 'Variation', 'Chance')
BRP_BANKS = (BRP_BANK1, BRP_BANK2)
BRP_BOBS = (BRP_BOB,)
BRP_BNK_NAMES = ('Repeat Rate', 'Gate/Pitch')
CAB_BANK1 = ('Cabinet Type', 'Microphone Position', 'Microphone Type', 'Dual Mono', '', '', '', 'Dry/Wet')
CAB_BANKS = (CAB_BANK1,)
CAB_BOBS = (CAB_BANK1,)
CHR_BANK1 = ('LFO Amount', 'LFO Rate', 'Delay 1 Time', 'Delay 1 HiPass', 'Delay 2 Time', 'Delay 2 Mode', 'Feedback', 'Dry/Wet')
CHR_BANKS = (CHR_BANK1,)
CHR_BOBS = (CHR_BANK1,)
CP3_BANK1 = ('Threshold', 'Ratio', 'Attack', 'Release', 'Auto Release On/Off', 'Env Mode', 'Knee', 'Model')
CP3_BANK2 = ('Threshold', 'Expansion Ratio', 'LookAhead', 'Side Listen', 'Ext. In Gain', 'Makeup', 'Dry/Wet', 'Output Gain')
CP3_BANK3 = ('EQ On', 'EQ Mode', 'EQ Freq', 'EQ Q', 'EQ Gain', 'Ext. In On', 'Ext. In Mix', 'Ext. In Gain')
CP3_BOB = ('Threshold', 'Ratio', 'Attack', 'Release', 'Model', 'Knee', 'Dry/Wet', 'Output Gain')
CP3_BANKS = (CP3_BANK1, CP3_BANK2, CP3_BANK3)
CP3_BOBS = (CP3_BOB,)
CP3_BNK_NAMES = ('Compression', 'Output', 'Side Chain')
CRP_BANK1 = ('Decay', 'Material', 'Mid Freq', 'Width', 'Bleed', 'Resonance Type', 'Gain', 'Dry Wet')
CRP_BANK2 = ('Listening L', 'Listening R', 'Hit', 'Brightness', 'Inharmonics', 'Radius', 'Opening', 'Ratio')
CRP_BANK3 = ('Resonance Type', 'Tune', 'Transpose', 'Fine', 'Spread', 'Resonator Quality', 'Note Off', 'Off Decay')
CRP_BOB = ('Brightness', 'Resonance Type', 'Material', 'Inharmonics', 'Decay', 'Ratio', 'Tune', 'Dry Wet')
CRP_BANKS = (CRP_BANK1, CRP_BANK2, CRP_BANK3)
CRP_BOBS = (CRP_BOB,)
CRP_BNK_NAMES = ('Amount', 'Body', 'Tune')
DTB_BANK1 = ('Drive', 'Bias', 'Envelope', 'Tone', 'Attack', 'Release', 'Output', 'Dry/Wet')
DTB_BANKS = (DTB_BANK1,)
DTB_BOBS = (DTB_BANK1,)
EQ8_BANK1 = ('1 Filter On A', '2 Filter On A', '3 Filter On A', '4 Filter On A', '5 Filter On A', '6 Filter On A', '7 Filter On A', '8 Filter On A')
EQ8_BANK2 = ('1 Frequency A', '2 Frequency A', '3 Frequency A', '4 Frequency A', '5 Frequency A', '6 Frequency A', '7 Frequency A', '8 Frequency A')
EQ8_BANK3 = ('1 Gain A', '2 Gain A', '3 Gain A', '4 Gain A', '5 Gain A', '6 Gain A', '7 Gain A', '8 Gain A')
EQ8_BANK4 = ('1 Resonance A', '2 Resonance A', '3 Resonance A', '4 Resonance A', '5 Resonance A', '6 Resonance A', '7 Resonance A', '8 Resonance A')
EQ8_BANK5 = ('1 Filter Type A', '2 Filter Type A', '3 Filter Type A', '4 Filter Type A', '5 Filter Type A', '6 Filter Type A', '7 Filter Type A', '8 Filter Type A')
EQ8_BANK6 = ('Adaptive Q', '', '', '', '', '', 'Scale', 'Output Gain')
EQ8_BANK7 = ('3 Gain A', '3 Frequency A', '3 Resonance A', '4 Gain A', '4 Frequency A', '4 Resonance A', '5 Gain A', '5 Frequency A')
EQ8_BOB = ('1 Frequency A', '1 Gain A', '2 Frequency A', '2 Gain A', '3 Frequency A', '3 Gain A', '4 Frequency A', '4 Gain A')
EQ8_BANKS = (EQ8_BANK1,
 EQ8_BANK2,
 EQ8_BANK3,
 EQ8_BANK4,
 EQ8_BANK5,
 EQ8_BANK6,
 EQ8_BANK7)
EQ8_BOBS = (EQ8_BOB,)
EQ8_BNK_NAMES = ('Band On/Off', 'Frequency', 'Gain', 'Resonance', 'Filter Type', 'Output', 'EQs 3-5')
EQ3_BANK1 = ('GainLo', 'GainMid', 'GainHi', 'FreqLo', 'LowOn', 'MidOn', 'HighOn', 'FreqHi')
EQ3_BANKS = (EQ3_BANK1,)
EQ3_BOBS = (EQ3_BANK1,)
ERO_BANK1 = ('Frequency', 'Width', 'Mode', 'Amount', '', '', '', '')
ERO_BANKS = (ERO_BANK1,)
ERO_BOBS = (ERO_BANK1,)
FLD_BANK1 = ('1 Filter Freq', '1 Filter Width', '1 Beat Delay', '1 Beat Swing', '1 Feedback', '1 Pan', '1 Volume', 'Dry')
FLD_BANK2 = ('2 Filter Freq', '2 Filter Width', '2 Beat Delay', '2 Beat Swing', '2 Feedback', '2 Pan', '2 Volume', 'Dry')
FLD_BANK3 = ('3 Filter Freq', '3 Filter Width', '3 Beat Delay', '3 Beat Swing', '3 Feedback', '3 Pan', '3 Volume', 'Dry')
FLD_BOB = ('2 Filter Freq', '2 Filter Width', '2 Beat Delay', '2 Feedback', '1 Volume', '3 Volume', '2 Volume', 'Dry')
FLD_BANKS = (FLD_BANK1, FLD_BANK2, FLD_BANK3)
FLD_BOBS = (FLD_BOB,)
FLD_BNK_NAMES = ('Input L Filter', 'Input L+R Filter', 'Input R Filter')
FLG_BANK1 = ('Hi Pass', 'Dry/Wet', 'Delay Time', 'Feedback', 'Env. Modulation', 'Env. Attack', 'Env. Release', '')
FLG_BANK2 = ('LFO Amount', 'Frequency', 'LFO Phase', 'Sync', 'LFO Offset', 'Sync Rate', 'LFO Width (Random)', 'LFO Waveform')
FLG_BOB = ('Hi Pass', 'Delay Time', 'Frequency', 'Sync Rate', 'LFO Amount', 'Env. Modulation', 'Feedback', 'Dry/Wet')
FLG_BANKS = (FLG_BANK1, FLG_BANK2)
FLG_BOBS = (FLG_BOB,)
FLG_BNK_NAMES = ('Frequency Controls', 'LFO / S&H')
FRS_BANK1 = ('Coarse', 'Fine', 'Mode', 'Ring Mod Frequency', 'Drive On/Off', 'Drive', 'Wide', 'Dry/Wet')
FRS_BANKS = (FRS_BANK1,)
FRS_BOBS = (FRS_BANK1,)
GTE_BANK1 = ('Threshold', 'Return', 'FlipMode', 'LookAhead', 'Attack', 'Hold', 'Release', 'Floor')
GTE_BANK2 = ('EQ On', 'EQ Mode', 'EQ Freq', 'EQ Q', 'EQ Gain', 'Ext. In On', 'Ext. In Mix', 'Ext. In Gain')
GTE_BANKS = (GTE_BANK1, GTE_BANK2)
GTE_BOBS = (GTE_BANK1,)
GTE_BNK_NAMES = ('Gate', 'Side Chain')
GLU_BANK1 = ('Threshold', 'Ratio', 'Attack', 'Release', 'Peak Clip In', 'Range', 'Dry/Wet', 'Makeup')
GLU_BANK2 = ('EQ On', 'EQ Mode', 'EQ Freq', 'EQ Q', 'EQ Gain', 'Ext. In On', 'Ext. In Mix', 'Ext. In Gain')
GLU_BOB = ('Threshold', 'Ratio', 'Attack', 'Release', 'Peak Clip In', 'Range', 'Makeup', 'Dry/Wet')
GLU_BANKS = (GLU_BANK1, GLU_BANK2)
GLU_BOBS = (GLU_BOB,)
GLU_BNK_NAMES = ('Compression', 'Side Chain')
GRD_BANK1 = ('Frequency', 'Pitch', 'Time Delay', 'Beat Swing', 'Random', 'Spray', 'Feedback', 'DryWet')
GRD_BANKS = (GRD_BANK1,)
GRD_BOBS = (GRD_BANK1,)
LPR_BANK1 = ('State', 'Speed', 'Reverse', 'Quantization', 'Monitor', 'Song Control', 'Tempo Control', 'Feedback')
LPR_BANKS = (LPR_BANK1,)
LPR_BOBS = (LPR_BANK1,)
MBD_BANK1 = ('Master Output', 'Amount', 'Time Scaling', 'Soft Knee On/Off', 'Peak/RMS Mode', 'Band Activator (High)', 'Band Activator (Mid)', 'Band Activator (Low)')
MBD_BANK2 = ('Input Gain (Low)', 'Below Threshold (Low)', 'Below Ratio (Low)', 'Above Threshold (Low)', 'Above Ratio (Low)', 'Attack Time (Low)', 'Release Time (Low)', 'Output Gain (Low)')
MBD_BANK3 = ('Input Gain (Mid)', 'Below Threshold (Mid)', 'Below Ratio (Mid)', 'Above Threshold (Mid)', 'Above Ratio (Mid)', 'Attack Time (Mid)', 'Release Time (Mid)', 'Output Gain (Mid)')
MBD_BANK4 = ('Input Gain (High)', 'Below Threshold (High)', 'Below Ratio (High)', 'Above Threshold (High)', 'Above Ratio (High)', 'Attack Time (High)', 'Release Time (High)', 'Output Gain (High)')
MBD_BANK5 = ('Low-Mid Crossover', 'Mid-High Crossover', '', '', '', '', '', '')
MBD_BANK6 = ('', '', '', '', '', 'Ext. In On', 'Ext. In Mix', 'Ext. In Gain')
MBD_BOB = ('Above Threshold (Low)', 'Above Ratio (Low)', 'Above Threshold (Mid)', 'Above Ratio (Mid)', 'Above Threshold (High)', 'Above Ratio (High)', 'Master Output', 'Amount')
MBD_BANKS = (MBD_BANK1,
 MBD_BANK2,
 MBD_BANK3,
 MBD_BANK4,
 MBD_BANK5,
 MBD_BANK6)
MBD_BOBS = (MBD_BOB,)
MBD_BNK_NAMES = ('Global', 'Low Band', 'Mid Band', 'High Band', 'Split Frequencies', 'Side Chain')
OVR_BANK1 = ('Filter Freq', 'Filter Width', 'Drive', 'Tone', 'Preserve Dynamics', '', '', 'Dry/Wet')
OVR_BANKS = (OVR_BANK1,)
OVR_BOBS = (OVR_BANK1,)
PHS_BANK1 = ('Poles', 'Color', 'Dry/Wet', 'Frequency', 'Env. Modulation', 'Env. Attack', 'Env. Release', 'Feedback')
PHS_BANK2 = ('LFO Amount', 'LFO Frequency', 'LFO Phase', 'LFO Sync', 'LFO Offset', 'LFO Sync Rate', 'LFO Spin', 'LFO Waveform')
PHS_BOB = ('Frequency', 'Feedback', 'Poles', 'Env. Modulation', 'Color', 'LFO Amount', 'LFO Frequency', 'Dry/Wet')
PHS_BANKS = (PHS_BANK1, PHS_BANK2)
PHS_BOBS = (PHS_BOB,)
PHS_BNK_NAMES = ('Frequency Controls', 'LFO / S&H')
PPG_BANK1 = ('Filter Freq', 'Filter Width', 'Time Delay', 'Beat Delay', 'Beat Swing', 'Delay Mode', 'Feedback', 'Dry/Wet')
PPG_BANKS = (PPG_BANK1,)
PPG_BOBS = (PPG_BANK1,)
RDX_BANK1 = ('Bit Depth', 'Sample Mode', 'Sample Hard', 'Sample Soft', 'Bit On', '', '', '')
RDX_BANKS = (RDX_BANK1,)
RDX_BOBS = (RDX_BANK1,)
RSN_BANK1 = ('Frequency', 'Width', 'Global Gain', 'Dry/Wet', 'Decay', 'I Note', 'Color', 'I Gain')
RSN_BANK2 = ('II Gain', 'III Gain', 'IV Gain', 'V Gain', 'II Pitch', 'III Pitch', 'IV Pitch', 'V Pitch')
RSN_BOB = ('Decay', 'I Note', 'II Pitch', 'III Pitch', 'IV Pitch', 'V Pitch', 'Global Gain', 'Dry/Wet')
RSN_BANKS = (RSN_BANK1, RSN_BANK2)
RSN_BOBS = (RSN_BOB,)
RSN_BNK_NAMES = ('General / Mode I', 'Modes II-IV')
RVB_BANK1 = ('In Filter Freq', 'In Filter Width', 'PreDelay', 'ER Spin On', 'ER Spin Rate', 'ER Spin Amount', 'ER Shape', 'DecayTime')
RVB_BANK2 = ('HiShelf Freq', 'LowShelf Freq', 'Chorus Rate', 'Density', 'HiShelf Gain', 'LowShelf Gain', 'Chorus Amount', 'Scale')
RVB_BANK3 = ('DecayTime', 'Freeze On', 'Room Size', 'Stereo Image', 'ER Level', 'Diffuse Level', 'Dry/Wet', 'Quality')
RVB_BOB = ('DecayTime', 'Room Size', 'PreDelay', 'In Filter Freq', 'ER Level', 'Diffuse Level', 'Stereo Image', 'Dry/Wet')
RVB_BANKS = (RVB_BANK1, RVB_BANK2, RVB_BANK3)
RVB_BOBS = (RVB_BOB,)
RVB_BNK_NAMES = ('Reflections', 'Diffusion Network', 'Global')
SAT_BANK1 = ('Drive', 'Base', 'Frequency', 'Width', 'Depth', 'Output', 'Dry/Wet', 'Type')
SAT_BANK2 = ('WS Drive', 'WS Lin', 'WS Curve', 'WS Damp', 'WS Depth', 'WS Period', 'Dry/Wet', '')
SAT_BOB = ('Drive', 'Type', 'Base', 'Frequency', 'Width', 'Depth', 'Output', 'Dry/Wet')
SAT_BANKS = (SAT_BANK1, SAT_BANK2)
SAT_BOBS = (SAT_BOB,)
SAT_BNK_NAMES = ('General Controls', 'Waveshaper Controls')
SMD_BANK1 = ('L Beat Delay', 'L Beat Swing', 'L Time Delay', 'R Beat Delay', 'R Beat Swing', 'R Time Delay', 'Feedback', 'Dry/Wet')
SMD_BANKS = (SMD_BANK1,)
SMD_BOBS = (SMD_BANK1,)
UTL_BANK1 = ('StereoSeparation', 'BlockDc', 'PhaseInvertL', 'PhaseInvertR', 'Signal Source', 'Panorama', 'Mute', 'Gain')
UTL_BANKS = (UTL_BANK1,)
UTL_BOBS = (UTL_BANK1,)
VDS_BANK1 = ('Tracing Freq.', 'Tracing Width', 'Tracing Drive', 'Crackle Density', 'Pinch Freq.', 'Pinch Width', 'Pinch Drive', 'Crackle Volume')
VDS_BANKS = (VDS_BANK1,)
VDS_BOBS = (VDS_BANK1,)
VOC_BANK1 = ('Formant Shift', 'Attack Time', 'Release Time', 'Mono/Stereo', 'Output Level', 'Gate Threshold', 'Envelope Depth', 'Dry/Wet')
VOC_BANK2 = ('Filter Bandwidth', 'Upper Filter Band', 'Lower Filter Band', 'Precise/Retro', 'Unvoiced Level', 'Unvoiced Sensitivity', 'Unvoiced Speed', 'Enhance')
VOC_BANK3 = ('Noise Rate', 'Noise Crackle', 'Upper Pitch Detection', 'Lower Pitch Detection', 'Oscillator Pitch', 'Oscillator Waveform', 'Ext. In Gain', '')
VOC_BOB = ('Formant Shift', 'Attack Time', 'Release Time', 'Unvoiced Level', 'Gate Threshold', 'Filter Bandwidth', 'Envelope Depth', 'Dry/Wet')
VOC_BANKS = (VOC_BANK1, VOC_BANK2, VOC_BANK3)
VOC_BOBS = (VOC_BOB,)
VOC_BNK_NAMES = ('Global', 'Filters/Voicing', 'Carrier')
DEVICE_DICT = {'AudioEffectGroupDevice': RCK_BANKS,
 'MidiEffectGroupDevice': RCK_BANKS,
 'InstrumentGroupDevice': RCK_BANKS,
 'DrumGroupDevice': RCK_BANKS,
 'InstrumentImpulse': IMP_BANKS,
 'Operator': OPR_BANKS,
 'UltraAnalog': ALG_BANKS,
 'OriginalSimpler': SIM_BANKS,
 'MultiSampler': SAM_BANKS,
 'MidiArpeggiator': ARP_BANKS,
 'LoungeLizard': ELC_BANKS,
 'StringStudio': TNS_BANKS,
 'Collision': COL_BANKS,
 'MidiChord': CRD_BANKS,
 'MidiNoteLength': NTL_BANKS,
 'MidiPitcher': PIT_BANKS,
 'MidiRandom': RND_BANKS,
 'MidiScale': SCL_BANKS,
 'MidiVelocity': VEL_BANKS,
 'AutoFilter': AFL_BANKS,
 'AutoPan': APN_BANKS,
 'BeatRepeat': BRP_BANKS,
 'Chorus': CHR_BANKS,
 'Compressor2': CP3_BANKS,
 'Corpus': CRP_BANKS,
 'Eq8': EQ8_BANKS,
 'FilterEQ3': EQ3_BANKS,
 'Erosion': ERO_BANKS,
 'FilterDelay': FLD_BANKS,
 'Flanger': FLG_BANKS,
 'FrequencyShifter': FRS_BANKS,
 'GrainDelay': GRD_BANKS,
 'Looper': LPR_BANKS,
 'MultibandDynamics': MBD_BANKS,
 'Overdrive': OVR_BANKS,
 'Phaser': PHS_BANKS,
 'Redux': RDX_BANKS,
 'Saturator': SAT_BANKS,
 'Resonator': RSN_BANKS,
 'CrossDelay': SMD_BANKS,
 'StereoGain': UTL_BANKS,
 'Tube': DTB_BANKS,
 'Reverb': RVB_BANKS,
 'Vinyl': VDS_BANKS,
 'Gate': GTE_BANKS,
 'PingPongDelay': PPG_BANKS,
 'Vocoder': VOC_BANKS,
 'Amp': AMP_BANKS,
 'Cabinet': CAB_BANKS,
 'GlueCompressor': GLU_BANKS}
DEVICE_BOB_DICT = {'AudioEffectGroupDevice': RCK_BOBS,
 'MidiEffectGroupDevice': RCK_BOBS,
 'InstrumentGroupDevice': RCK_BOBS,
 'DrumGroupDevice': RCK_BOBS,
 'InstrumentImpulse': IMP_BOBS,
 'Operator': OPR_BOBS,
 'UltraAnalog': ALG_BOBS,
 'OriginalSimpler': SIM_BOBS,
 'MultiSampler': SAM_BOBS,
 'MidiArpeggiator': ARP_BOBS,
 'LoungeLizard': ELC_BOBS,
 'StringStudio': TNS_BOBS,
 'Collision': COL_BOBS,
 'MidiChord': CRD_BOBS,
 'MidiNoteLength': NTL_BOBS,
 'MidiPitcher': PIT_BOBS,
 'MidiRandom': RND_BOBS,
 'MidiScale': SCL_BOBS,
 'MidiVelocity': VEL_BOBS,
 'AutoFilter': AFL_BOBS,
 'AutoPan': APN_BOBS,
 'BeatRepeat': BRP_BOBS,
 'Chorus': CHR_BOBS,
 'Compressor2': CP3_BOBS,
 'Corpus': CRP_BOBS,
 'Eq8': EQ8_BOBS,
 'FilterEQ3': EQ3_BOBS,
 'Erosion': ERO_BOBS,
 'FilterDelay': FLD_BOBS,
 'Flanger': FLG_BOBS,
 'FrequencyShifter': FRS_BOBS,
 'GrainDelay': GRD_BOBS,
 'Looper': LPR_BOBS,
 'MultibandDynamics': MBD_BOBS,
 'Overdrive': OVR_BOBS,
 'Phaser': PHS_BOBS,
 'Redux': RDX_BOBS,
 'Saturator': SAT_BOBS,
 'Resonator': RSN_BOBS,
 'CrossDelay': SMD_BOBS,
 'StereoGain': UTL_BOBS,
 'Tube': DTB_BOBS,
 'Reverb': RVB_BOBS,
 'Vinyl': VDS_BOBS,
 'Gate': GTE_BOBS,
 'PingPongDelay': PPG_BOBS,
 'Vocoder': VOC_BOBS,
 'Amp': AMP_BOBS,
 'Cabinet': CAB_BOBS,
 'GlueCompressor': GLU_BOBS}
BANK_NAME_DICT = {'AudioEffectGroupDevice': RCK_BNK_NAMES,
 'MidiEffectGroupDevice': RCK_BNK_NAMES,
 'InstrumentGroupDevice': RCK_BNK_NAMES,
 'DrumGroupDevice': RCK_BNK_NAMES,
 'InstrumentImpulse': IMP_BNK_NAMES,
 'Operator': OPR_BNK_NAMES,
 'UltraAnalog': ALG_BNK_NAMES,
 'OriginalSimpler': SIM_BNK_NAMES,
 'MultiSampler': SAM_BNK_NAMES,
 'MidiArpeggiator': ARP_BNK_NAMES,
 'LoungeLizard': ELC_BNK_NAMES,
 'StringStudio': TNS_BNK_NAMES,
 'Collision': COL_BNK_NAMES,
 'MidiChord': CRD_BNK_NAMES,
 'BeatRepeat': BRP_BNK_NAMES,
 'Compressor2': CP3_BNK_NAMES,
 'Corpus': CRP_BNK_NAMES,
 'Eq8': EQ8_BNK_NAMES,
 'FilterDelay': FLD_BNK_NAMES,
 'Flanger': FLG_BNK_NAMES,
 'Gate': GTE_BNK_NAMES,
 'MultibandDynamics': MBD_BNK_NAMES,
 'Phaser': PHS_BNK_NAMES,
 'Saturator': SAT_BNK_NAMES,
 'Resonator': RSN_BNK_NAMES,
 'Reverb': RVB_BNK_NAMES,
 'Vocoder': VOC_BNK_NAMES,
 'Amp': AMP_BNK_NAMES,
 'GlueCompressor': GLU_BNK_NAMES,
 'AutoFilter': AFL_BNK_NAMES}
MAX_DEVICES = ('MxDeviceInstrument', 'MxDeviceAudioEffect', 'MxDeviceMidiEffect')

def device_parameters_to_map(device):
    return tuple(device.parameters[1:])


def parameter_bank_names(device, bank_name_dict = BANK_NAME_DICT):
    """ Determine the bank names to use for a device """
    if device != None:
        if device.class_name in bank_name_dict.keys():
            return bank_name_dict[device.class_name]
        else:
            banks = number_of_parameter_banks(device)

            def _default_bank_name(bank_index):
                return 'Bank ' + str(bank_index + 1)

            if device.class_name in MAX_DEVICES and banks != 0:

                def _is_ascii(c):
                    return ord(c) < 128

                def _bank_name(bank_index):
                    try:
                        name = device.get_bank_name(bank_index)
                    except:
                        name = None

                    if name:
                        return str(filter(_is_ascii, name))
                    else:
                        return _default_bank_name(bank_index)

                return map(_bank_name, range(0, banks))
            else:
                return map(_default_bank_name, range(0, banks))
    return []


def parameter_banks(device, device_dict = DEVICE_DICT):
    """ Determine the parameters to use for a device """
    if device != None:
        if device.class_name in device_dict.keys():

            def names_to_params(bank):
                return map(partial(get_parameter_by_name, device), bank)

            return map(names_to_params, device_dict[device.class_name])
        else:
            if device.class_name in MAX_DEVICES:
                try:
                    banks = device.get_bank_count()
                except:
                    banks = 0

                if banks != 0:

                    def _bank_parameters(bank_index):
                        try:
                            parameter_indices = device.get_bank_parameters(bank_index)
                        except:
                            parameter_indices = []

                        if len(parameter_indices) != 8:
                            return [ None for i in range(0, 8) ]
                        else:
                            return [ (device.parameters[i] if i != -1 else None) for i in parameter_indices ]

                    return map(_bank_parameters, range(0, banks))
            return group(device_parameters_to_map(device), 8)
    return []


def best_of_parameter_bank(device, device_bob_dict = DEVICE_BOB_DICT):
    bobs = device and device.class_name in device_bob_dict and device_bob_dict[device.class_name]
    if not len(bobs) == 1:
        raise AssertionError
        return map(partial(get_parameter_by_name, device), bobs[0])
    if device.class_name in MAX_DEVICES:
        try:
            parameter_indices = device.get_bank_parameters(-1)
            return [ (device.parameters[i] if i != -1 else None) for i in parameter_indices ]
        except:
            return []

    return []


def number_of_parameter_banks(device, device_dict = DEVICE_DICT):
    """ Determine the amount of parameter banks the given device has """
    if device != None:
        if device.class_name in device_dict.keys():
            device_bank = device_dict[device.class_name]
            return len(device_bank)
        else:
            if device.class_name in MAX_DEVICES:
                try:
                    banks = device.get_bank_count()
                except:
                    banks = 0

                if banks != 0:
                    return banks
            param_count = len(device.parameters[1:])
            return param_count / 8 + (1 if param_count % 8 else 0)
    return 0


def get_parameter_by_name(device, name):
    """ Find the given device's parameter that belongs to the given name """
    for i in device.parameters:
        if i.original_name == name:
            return i

[TomViolenz]

If it didn't work just remove the file from the folder again (it is now named devices.pyc because Live compiles Python scripts on start up- your devices.py might also be still there, so remove that as well) and put back the original devices.pyc
Start Live again and everything should be back to normal...

[syncr]

Ok, installed as described. Unfortunately, file failed to take over the Push.
Used a code editor and no .txt @ the end. Tried both .py as described and .pyc. No dice.

Replaced with original devices.pyc and things went back to normal.

[TomViolenz]

I'll have a look. I assume standard modification is required for the fist line?

Code: Select all

#Embedded file name: /Users/versonator/Hudson/live/Projects/AppLive/Resources/MIDI Remote Scripts/_Generic/Devices.py

What do you mean standard modification?
I never considered changing this
But yeah seems reasonable to change it to your file path I guess...

(But this seems to be the only part that should be different from user to user, the rest looks general. Good catch though )

[TomViolenz]

Scratch that

Why, I think this is a valid remark!

I'm actually not even sure what the correct file path is for me:

/Users/versonator/Hudson/live/Projects/AppLive/Resources/MIDI Remote Scripts/_Generic/Devices.py

Mine would rather be:

..../Contents/App-Resources/Midi Remote Scripts/_Generic/devices.py

And I don't know what would fill the dotted part either?
Well, that's what happens when amateurs try to play nerd....

[syncr]

Actually, I think it is just comment. I don't think there is a need to change it after all. Not sure why it is called embedded though.

http://www.python.org/doc/essays/ppt/hp ... sld014.htm

[TomViolenz]

Actually, I think it is just comment. I don't think there is a need to change it after all. Not sure why it is called embedded though.

http://www.python.org/doc/essays/ppt/hp ... sld014.htm

You seem to know what your doing, that makes one of us
Curious if it will work!

[TomViolenz]

Ah, I see, the # indicates a comment
but how is the end of the comment defined, just the line break?

[Valiumdupeuple]

I'm very interested by all this shit.
Thx for the informations Tom.
As soon as I have some time to switch to zombie mode, I'll take the plunge and let you know how it works/doesn't, what I might have found that could be helpful ...

[syncr]

Yes. It's a single line comment (#comment) vs a multi-line comment which is a weird triple quote on either end ('''...comment...''')

I did post a result above in case you missed it.

[TomViolenz]

Ok, installed as described. Unfortunately, file failed to take over the Push.
Used a code editor and no .txt @ the end. Tried both .py as described and .pyc. No dice.

Replaced with original devices.pyc and things went back to normal.

You can also try the file from github: in the generic folder.
https://github.com/gluon/AbletonLive9_RemoteScripts

Try to change the Sampler lines in the file for:

Code: Select all

SAM_BANK1 = ('Transpose', 'Spread', 'Pe Init', 'Pe Peak', 'Pe Attack', 'Pe Decay', 'Pe Sustain', 'Pe Release')
SAM_BANK2 = ('Filter Type', 'Filter Freq', 'Filter Res', 'Filter Morph', 'Filt < Vel', 'Shaper Pre-Filter', 'Shaper Type', 'Shaper Amt')
SAM_BANK3 = ('Fe < Env', 'Fe End', 'Fe Init', 'Fe Peak', 'Fe Attack', 'Fe Decay', 'Fe Sustain', 'Fe Release')
SAM_BANK4 = ('O Type', 'O Volume', 'O Fix Freq', 'O Fix Freq Mul', 'Oe Attack', 'Oe Decay', 'Oe Sustain', 'Oe Release')
SAM_BANK5 = ('L 1 Wave', 'L 1 Sync', 'L 1 Rate', 'L 1 Sync Rate', 'Vol < LFO', 'Pan < LFO', 'Filt < LFO', 'Pitch < LFO')
SAM_BANK6 = ('L 2 Wave', 'L 2 Sync', 'L 2 Sync Rate', 'L 2 Rate', 'L 2 Offset', 'L 2 St Mode', 'L 2 Spin', 'L 2 Phase')
SAM_BANK7 = ('L 3 Wave', 'L 3 Sync', 'L 3 Sync Rate', 'L 3 Rate', 'L 3 Offset', 'L 3 St Mode', 'L 3 Spin', 'L 3 Phase')
SAM_BANK8 = ('Time', 'Ae End', 'Ae Init', 'Ae Peak', 'Ae Attack', 'Ae Decay', 'Ae Sustain', 'Ae Release')
SAM_BOB = ('Volume', 'Sample Selector', 'Ve Init', 'Ve Peak', 'Ve Attack', 'Ve Decay', 'Ve Sustain', 'Ve Release')
SAM_BANKS = (SAM_BANK1,
 SAM_BANK2,
 SAM_BANK3,
 SAM_BANK4,
 SAM_BANK5,
 SAM_BANK6,
 SAM_BANK7,
 SAM_BANK8)
SAM_BOBS = (SAM_BOB,)
SAM_BNK_NAMES = ('Pitch', 'Filter', 'Filter Envelope', 'Oscillator', 'LFO 1', 'LFO 2', 'LFO 3', 'Aux Envelope')

[TomViolenz]

Yes. It's a single line comment (#comment) vs a multi-line comment which is a weird triple quote on either end ('''...comment...''')

I did post a result above in case you missed it.

Ah, I see.

[TomViolenz]

I'm actually surprised that it doesn't work!
Could you take the file from GitHub and exchange it for the file in your Live App without changing anything?
If it still works with this, try to change the Sampler lines with an editor, and try again.



If these things still fail, I'm at a loss for further actions....

PS:I think the .py ending is necessary as .pyc would indicate that it is already compiled and that could trip up Live.

[syncr]

Ok. Good news, bad news.
There were some errant spaces and the script is loading. I'm working on documenting what isn't working. Standby on that for a few minutes.


Code that has spaces removed (from in from of the SAM_BANK block @ the bottom)

Code: Select all

SAM_BANK1 = ('Transpose', 'Spread', 'Pe Init', 'Pe Peak', 'Pe Attack', 'Pe Decay', 'Pe Sustain', 'Pe Release')
SAM_BANK2 = ('Filter Type', 'Filter Freq', 'Filter Res', 'Filter Morph', 'Filt < Vel', 'Shaper Pre-Filter', 'Shaper Type', 'Shaper Amt')
SAM_BANK3 = ('Fe < Env', 'Fe End', 'Fe Init', 'Fe Peak', 'Fe Attack', 'Fe Decay', 'Fe Sustain', 'Fe Release')
SAM_BANK4 = ('O Type', 'O Volume', 'O Fix Freq', 'O Fix Freq Mul', 'Oe Attack', 'Oe Decay', 'Oe Sustain', 'Oe Release')
SAM_BANK5 = ('L 1 Wave', 'L 1 Sync', 'L 1 Rate', 'L 1 Sync Rate', 'Vol < LFO', 'Pan < LFO', 'Filt < LFO', 'Pitch < LFO')
SAM_BANK6 = ('L 2 Wave', 'L 2 Sync', 'L 2 Sync Rate', 'L 2 Rate', 'L 2 Offset', 'L 2 St Mode', 'L 2 Spin', 'L 2 Phase')
SAM_BANK7 = ('L 3 Wave', 'L 3 Sync', 'L 3 Sync Rate', 'L 3 Rate', 'L 3 Offset', 'L 3 St Mode', 'L 3 Spin', 'L 3 Phase')
SAM_BANK8 = ('Time', 'Ae End', 'Ae Init', 'Ae Peak', 'Ae Attack', 'Ae Decay', 'Ae Sustain', 'Ae Release')
SAM_BOB = ('Volume', 'Sample Selector', 'Ve Init', 'Ve Peak', 'Ve Attack', 'Ve Decay', 'Ve Sustain', 'Ve Release')
SAM_BANKS = (SAM_BANK1,
 SAM_BANK2,
 SAM_BANK3,
 SAM_BANK4,
 SAM_BANK5,
 SAM_BANK6,
 SAM_BANK7, 
SAM_BANK8)
SAM_BOBS = (SAM_BOB,)
SAM_BNK_NAMES = ('Pitch', 'Filter', 'Filter Envelope', 'Oscillator', 'LFO 1', 'LFO 2', 'LFO 3', 'Aux Envelope')

Looks the same but when pasted I had some extras so I thought I'd repost. <shrug>