Follow Action / Arrangement Position
Posted: Wed May 27, 2015 1:39 pm
Cant find any solution for my problem:
I have 2 different Loops - First one in 4/4 and the second one is fixed to 8 Bars in 4/4 and then one single 2/4 - I start the 2nd Loop on Cue. The Problem is: After i get back to Loop 1 due to the follow action the Arrangement Position is 'uneven' because of the single 2/4 - So everytime i cue the 2nd Loop again it starts 'odd' due to the 1 Bar Quantisation (which seems related to the arrangement position).
I tried a follow Action for Loop 2 after 8.2.0 Bars, that didnt worked out
I tried to split this Loop into one normal 8 Bar Loop and one short additional 2/4 Bar, didnt worked out too.
Solutions would be:
- A way that the Arrengement Position considers this single 2/4 Bar and for instance switches from 8.2.0 (The length of Loop 2) directly to 9.0.0
- A way that the follow action for Loop 2 includes a reset of the Arrangement Position to 0.0.0
I cant find any hints to achieve this.
Big Thanks in advance!
I have 2 different Loops - First one in 4/4 and the second one is fixed to 8 Bars in 4/4 and then one single 2/4 - I start the 2nd Loop on Cue. The Problem is: After i get back to Loop 1 due to the follow action the Arrangement Position is 'uneven' because of the single 2/4 - So everytime i cue the 2nd Loop again it starts 'odd' due to the 1 Bar Quantisation (which seems related to the arrangement position).
I tried a follow Action for Loop 2 after 8.2.0 Bars, that didnt worked out
I tried to split this Loop into one normal 8 Bar Loop and one short additional 2/4 Bar, didnt worked out too.
Solutions would be:
- A way that the Arrengement Position considers this single 2/4 Bar and for instance switches from 8.2.0 (The length of Loop 2) directly to 9.0.0
- A way that the follow action for Loop 2 includes a reset of the Arrangement Position to 0.0.0
I cant find any hints to achieve this.
Big Thanks in advance!