All times are UTC

 
 



Post new topic Reply to topic  [ 15 posts ] 
Author Message
 Post subject: YouTube samples
PostPosted: Sun Feb 05, 2017 12:43 am 

Joined: Sat May 02, 2015 8:09 pm
Posts: 81
What is the best way to capture highest quality audio from YouTube without any quality loss? I'm using a 2015 MacBook Pro laptop with newest OS. I'm most concern with quality and am fine to pay for an application.

Ideally I could record a specific application (web browser with YouTube) while say watching Netflix one only YouTube is recorded.

I purchased ambrosia wire tap pro which worked great on a mac desktop. But wiretap doesn't work on MacBook and as of a few months ago it no longer works on the desktop either. I tried a free audio capture app but the quality was awful.

Any help greatly appreciated!


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Sun Feb 05, 2017 2:40 am 
Site Admin

Joined: Mon Jun 01, 2015 3:04 pm
Posts: 1236
Location: Ableton
Soundflower works great and is free.
Some external soundcards also offer virtual internal routing.

_________________
Ableton Forum Moderator


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Sun Feb 05, 2017 11:15 am 

Joined: Wed Jun 25, 2014 11:34 am
Posts: 7055
[jur] wrote:
Soundflower works great and is free.
Some external soundcards also offer virtual internal routing.


If you can get it working. I haven't got it fully working since OS X 10.6 and I've tried all distributions there was at the time.

In the end I got Loopback only to realize RME Total Mix can do recording from any source.

By the way you didn't ever answer my question in the link above:
Quote:
"Exact version and source?"

_________________
Make some music!


Last edited by Stromkraft on Sun Feb 05, 2017 11:31 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Sun Feb 05, 2017 11:25 am 

Joined: Wed Jun 25, 2014 11:34 am
Posts: 7055
dhpetrescu wrote:
What is the best way to capture highest quality audio from YouTube without any quality loss? I'm using a 2015 MacBook Pro laptop with newest OS. I'm most concern with quality and am fine to pay for an application.

Ideally I could record a specific application (web browser with YouTube) while say watching Netflix one only YouTube is recorded.

I purchased ambrosia wire tap pro which worked great on a mac desktop. But wiretap doesn't work on MacBook and as of a few months ago it no longer works on the desktop either. I tried a free audio capture app but the quality was awful.

Any help greatly appreciated!


The best way though is to get the MP4 source, open it up in Quicktime Player and Export as "only audio", as long as the audio source is in AAC you should get the original audio untouched. I have done favourable null tests on this, but it probably varies with source.

Recording is more convenient though as usually you just want a snippet. It can also be argued that recording to AIFF/Wav from a source gives you the exact same result as when you convert extracted audio to those formats in Live.

We should also note that much of what is published on youtube is covered by copyright. I'm contemplating re-constructing the few spoken word samples I've used, mostly out of artistic reasons.

_________________
Make some music!


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Sun Feb 05, 2017 12:32 pm 
Site Admin

Joined: Mon Jun 01, 2015 3:04 pm
Posts: 1236
Location: Ableton
I don't know which version I'm using, but it's perfectly working on el capitan. Maybe try here, or there?

_________________
Ableton Forum Moderator


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Sun Feb 05, 2017 12:54 pm 

Joined: Wed Jun 25, 2014 11:34 am
Posts: 7055
[jur] wrote:
or there?


The latter I haven't seen. Thanks. I don't need it though.

_________________
Make some music!


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Sun Feb 05, 2017 8:43 pm 

Joined: Sat May 02, 2015 8:09 pm
Posts: 81
[jur] wrote:
I don't know which version I'm using, but it's perfectly working on el capitan. Maybe try here, or there?


Thanks, this would be amazing if it works. I'll try this when I get home this weekend. I'd like to build up my own large sample library (inspired by a Four Tet interview).

Do you recommend any particular setting when saving 1080 YouTube audio? Is 24 bit 44.1 (what I used to do) sufficient or is greater better?


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Mon Feb 06, 2017 2:14 am 

Joined: Wed Jun 25, 2014 11:34 am
Posts: 7055
dhpetrescu wrote:
I'd like to build up my own large sample library (inspired by a Four Tet interview).


Yeah, but I'd hope that would also mean using a microphone and recorder in the field.

dhpetrescu wrote:
Do you recommend any particular setting when saving 1080 YouTube audio? Is 24 bit 44.1 (what I used to do) sufficient or is greater better?


I'm assuming you mean recording rather than saving (unless you referred to my QT Player suggestion)? Matching the source stream is most likely sufficient. The tool used — Soundflower, Loopback, Total Mix — may affect the stream. At best, the tool adapts to the source, but just as in Live I'd assume most tools uses at least higher bit depth than what the source does, at least when there's multiple sources. There must be some kind of re-sampling going on. I'm not sure how to measure this, nor if it is important or not. So far I haven't cared, if for nothing else I process all samples heavily.

If you have 48 kHz in the stream, it's generally better to record it at that, especially if you intend to slow down the sample later. Though I'd assume the difference is negligible. It might not be a good idea to mix different sample rates in Live either, even if that's possible. I don't think you need to take as much care about a media sample as you do when you record some vocals.

I stopped recording like this because of bad experiences of Soundflower (distortion in live broadcasts), then extracted audio from digital sources like media samples, now I've returned via Loopback if I need to record anything on the fly, that I find somewhat clunky. No distortion though. I will try Total Mix now.

_________________
Make some music!


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Mon Feb 06, 2017 4:40 am 

Joined: Sat May 02, 2015 8:09 pm
Posts: 81
Stromkraft,
Is there a way to actually save her YouTube file directly via QT Player? That would be ideal. I'm perfectly fine to save the entire large audio file rather than a short snippet. I do that anyway since I can never predict which small section of a samples I'll end up using.

PS: recorder is next on my wish list. So far I've been using my iPhone and dropbox. Quality is not great but it's mostly for background air/noise and works OK.

Stromkraft wrote:
dhpetrescu wrote:
I'd like to build up my own large sample library (inspired by a Four Tet interview).


Yeah, but I'd hope that would also mean using a microphone and recorder in the field.

dhpetrescu wrote:
Do you recommend any particular setting when saving 1080 YouTube audio? Is 24 bit 44.1 (what I used to do) sufficient or is greater better?


I'm assuming you mean recording rather than saving (unless you referred to my QT Player suggestion)? Matching the source stream is most likely sufficient. The tool used — Soundflower, Loopback, Total Mix — may affect the stream. At best, the tool adapts to the source, but just as in Live I'd assume most tools uses at least higher bit depth than what the source does, at least when there's multiple sources. There must be some kind of re-sampling going on. I'm not sure how to measure this, nor if it is important or not. So far I haven't cared, if for nothing else I process all samples heavily.

If you have 48 kHz in the stream, it's generally better to record it at that, especially if you intend to slow down the sample later. Though I'd assume the difference is negligible. It might not be a good idea to mix different sample rates in Live either, even if that's possible. I don't think you need to take as much care about a media sample as you do when you record some vocals.

I stopped recording like this because of bad experiences of Soundflower (distortion in live broadcasts), then extracted audio from digital sources like media samples, now I've returned via Loopback if I need to record anything on the fly, that I find somewhat clunky. No distortion though. I will try Total Mix now.


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Tue Feb 07, 2017 8:10 am 

Joined: Sat May 02, 2015 8:09 pm
Posts: 81
For the record, in someone searches for this in the future.

...I was able to install soundflower on my MacBook with Pro El Capitan OS. And it works great I can now just route any sound to Ableton and record directly. It worked using the second web link provided in jur's response, the version that had the signature included. The sound quality seems really great.

.... haven't figured out how to route one application to sound flower while routing the other application to a different source. But that's a luxury I can figure out later.

... using audacity without sound flower I found the sound quality of the recording to be very very horrible.

...haven't done it yet but I'm planning to also try out RME total mix for comparison

Thank you for your help!


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Wed Feb 08, 2017 8:23 am 

Joined: Sun Jan 03, 2010 9:44 pm
Posts: 82
offliberty.com


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Wed Feb 08, 2017 12:07 pm 

Joined: Wed Jun 25, 2014 11:34 am
Posts: 7055
dhpetrescu wrote:
Stromkraft,
Is there a way to actually save her YouTube file directly via QT Player?


I don't think so, no. There are plenty of other solutions including browser add-ons and dedicated apps. I can't recommend any particular solution. You'd need to evaluate the tools you find. At a minimum it should be able to download the highest quality source MP4 stream (I'd avoid Flash). 720p and above has improved audio in many cases, but this depend on the source.

_________________
Make some music!


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Tue Feb 13, 2018 2:25 pm 

Joined: Wed Apr 03, 2013 9:22 am
Posts: 1492
Hey Stromkraft. Care to share your Total Mix settings for routing audio from your web browser? I'm pretty sure with a little poking around I'll figure it out but any hints would be greatly appreciated!

_________________
https://soundcloud.com/acaciabridge


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Tue Feb 13, 2018 5:55 pm 

Joined: Mon Dec 28, 2009 5:36 pm
Posts: 1575
Here's where he found out: How to record Other Audio SW channels into DAW?


Top
 Profile  
 
 Post subject: Re: YouTube samples
PostPosted: Wed Jan 09, 2019 5:23 am 

Joined: Wed Apr 26, 2017 3:12 am
Posts: 1
aux cord to an h2n, which saves as wav. it's not DIRECT, but it takes less than a minute to plug it in and drag some files onto your computer and be editing them in Ableton.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC

 
 

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group