Following the fantastic tips from Machinate, I've set up the Evolution UC33 to work as Mackie Control. I know the faders aren't motorised but it apart from that everything works.
http://s53.yousendit.com/d.aspx?id=1JGE ... CYU1IBIF5S
or
http://www.beatrouteproductions.com/Mus ... ontrol.xml (thanks to LJ)
Faders 1-8 - Live first 8 faders
Fader 9 - Master volume
Button 1 - launch clip
Button 3 - Launch scene
2,4,5,6 - up, left, down, right
7 - open close browser
8 - loop on off
9 - undo
Transport controls work as printed on the UC33 - (stop, play, left, right)
Button 0 - record
I've left the 24 rotary controls at the top as CCs so that you can map them to whatever you want in your project.
Also, the second preset on the UC33 is again CCs only to map to whatever you want in Live. I often change between preset 1 and 2 within a set depending on what I want to control at the time.
All you have to do is to download the following file, open it in Enigma and then upload it to the UC33. Then tell Live that you want to use the UC33 as Mackie Control.
Have fun and I hope somebody finds this useful
