All times are UTC

 
 



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 5 posts ] 
Author Message
 Post subject: Driver Error Compensation doesn't work
PostPosted: Mon Oct 19, 2009 1:54 pm 

Joined: Sat Nov 25, 2006 5:40 pm
Posts: 111
hello

i've tried setting up the driver error compensation, i've used the lesson about it, with the ableton live set.

i've found out two things, first probably is useless recording the external output to the input because the value obtained is exactly the same called "overall latency" in the preferences/audio/under "driver error compensation"

second, i've set the compensation value, but the audio isn't compensated.

than i've tried putting 300ms just to try.. and the waveform is always there, with its 9.60 ms (i say 9.60 because adjusting the start in the clip the nearest value is 9, but is a bit later, so 9.60 (displayed as overall latency) seems the right value)

so, how to make it work?

thanks


Top
 Profile  
 
 Post subject: Re: Driver Error Compensation doesn't work
PostPosted: Wed Oct 21, 2009 3:50 am 

Joined: Mon Dec 22, 2003 3:42 pm
Posts: 9088
Location: seattle
i can't confirm


the error compensation lesson and it's procedures works fine here

i will say that at first, i tried to go freestyle and set it myself, without the lesson... and got something similar to what you describe

but when I opened the lesson and did it that way, it worked. probably had some monitoring setting wrong

?


Top
 Profile  
 
 Post subject: Re: Driver Error Compensation doesn't work
PostPosted: Sun Nov 22, 2009 8:40 pm 

Joined: Wed Jan 11, 2006 10:28 am
Posts: 77
i have the same problem with this lesson...

i have connection via RME ADAT out > Yamaha 03D digital mixer > back via ADAT RME in > Live

the audio is 11 ms late but nothing happens when 11 ms set as a Driver Error Compensation value..

is that ADTAT matters?

cheers

j

_________________
MBP 2.16, 2Gb / Mac Pro 8 cores, external eSATA drive • Apogee Duet • Live 8.1.1 • Faderfox LV2 • etc...

myspace.com/jurekp

www.jurekprzezdziecki.net


Top
 Profile  
 
 Post subject: Re: Driver Error Compensation doesn't work
PostPosted: Sun Nov 22, 2009 8:55 pm 

Joined: Sat Nov 25, 2006 5:40 pm
Posts: 111
you have to turn off the monitoring in the ableton track.. and then you will have no latency. you can use the total mix for zero latency monitoring.


Top
 Profile  
 
 Post subject: Re: Driver Error Compensation doesn't work
PostPosted: Thu Nov 26, 2009 12:42 pm 

Joined: Wed Jan 11, 2006 10:28 am
Posts: 77
yes, you are right.

thnx j

_________________
MBP 2.16, 2Gb / Mac Pro 8 cores, external eSATA drive • Apogee Duet • Live 8.1.1 • Faderfox LV2 • etc...

myspace.com/jurekp

www.jurekprzezdziecki.net


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 5 posts ] 

All times are UTC

 
 

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group