Serious Issues with Live 8
Posted: Mon Feb 01, 2010 7:32 am
Since my other topics and posts always go unanswered here, I will try again.
After upgrading to Live 8, I have been plagued with problems. The biggest issue is, I cannot loop something for more then about 10 minutes without my ASIO engine melting down and Live suffering from Serious Error messages. If I loop something (especially very short loops), Live will loop fine for anywhere from 1 minute to 10 minutes and then my CPU usage will go to 1000%, audio engine melt down (or a crazy number in 100s/1000s) and I get a message saying "Live has a serious error and will be closed once the box is closed", then I have to exit Live and wait for it to get out of memory until restarting and many times when I am trying to recover my work from last undo, another serious error will occur. Things I have tried:
- changing buffer sizes from 128 to 1024 on both PreSonus firebox and M-audio ProFire 610
- running live in Administrator mode
- running a simple project (2 audio tracks) - sooner or later the error will occur anyway
- my delay compensation is off, set to 0ms.
- disabling system services and processes to minimize system load, including using "optimize system for maximum performance" setting and disabling all themes etc.
- using older drivers for both interfaces
- updating and rolling back all my system drivers including GPU drivers, Motherboard BIOS, Raid Drivers, having a Non-Raid setup, all latest updates etc.
I am running on Ableton Suite 8.1.1, Core i7 965, with 6GB RAM, Windows 7 x64 Ultimate w/ latest updates, drivers, Administrator mode.
And not to mention that every time I close Live, I get "Live has stopped working" message.
This is extremely frustrating and I am really hoping to get some answers here...
After upgrading to Live 8, I have been plagued with problems. The biggest issue is, I cannot loop something for more then about 10 minutes without my ASIO engine melting down and Live suffering from Serious Error messages. If I loop something (especially very short loops), Live will loop fine for anywhere from 1 minute to 10 minutes and then my CPU usage will go to 1000%, audio engine melt down (or a crazy number in 100s/1000s) and I get a message saying "Live has a serious error and will be closed once the box is closed", then I have to exit Live and wait for it to get out of memory until restarting and many times when I am trying to recover my work from last undo, another serious error will occur. Things I have tried:
- changing buffer sizes from 128 to 1024 on both PreSonus firebox and M-audio ProFire 610
- running live in Administrator mode
- running a simple project (2 audio tracks) - sooner or later the error will occur anyway
- my delay compensation is off, set to 0ms.
- disabling system services and processes to minimize system load, including using "optimize system for maximum performance" setting and disabling all themes etc.
- using older drivers for both interfaces
- updating and rolling back all my system drivers including GPU drivers, Motherboard BIOS, Raid Drivers, having a Non-Raid setup, all latest updates etc.
I am running on Ableton Suite 8.1.1, Core i7 965, with 6GB RAM, Windows 7 x64 Ultimate w/ latest updates, drivers, Administrator mode.
And not to mention that every time I close Live, I get "Live has stopped working" message.
This is extremely frustrating and I am really hoping to get some answers here...