Pretty poor at 192

James Cater · Post by **James Cater** » Fri Mar 03, 2006 1:01 am

I've reported this to ableton before and we still don't seem to have solution.

Each time I run at 192/24 Ableton's GUi seems to freeze with the new track and then the whole application stops mixeing the tracks.

I've even changed ny hardware thinking it was Apoggee's fault.

Now it must be a bug in ableton

James Cater · Post by **James Cater** » Fri Mar 03, 2006 1:37 am

P.S.

Ableton 4.1.4 plays just fine at 192/24

Post by **Alex** » Fri Mar 03, 2006 4:52 pm

Hi James Cater,

do you have an audio clip running in the "complex" warp mode?
There is a problem with the "complex" warp mode when running at 192 khz.

regards,
/Alex

James Cater · Post by **James Cater** » Fri Mar 03, 2006 7:40 pm

FANTASTIC

Yes this is the problem.

I can finally use Ableton at 192 !!!

I assume you can fix this.

Post by **Alex** » Fri Mar 03, 2006 7:55 pm

Hello James,

Ok, so we know what the problem is.

I assume you can fix this.

We'll try but it is quite complicated also because the 'complex' warp is an external licensed technology. So I cannot promise it.

regards,
/Alex

James Cater · Post by **James Cater** » Sat Mar 04, 2006 1:57 am

This is ok for me, I manually check all my warped tracks anyway, so using beat mode is fine.

Once the tracks have been warped, why do you need to call out to the external software anyway. ie at playback tme all the warp markers are in place and you should no longer depend on the external software,

bensuthers · Post by **bensuthers** » Sat Mar 04, 2006 2:03 am

that's not how it works, James. Warping is in realtime.

Post by **Alex** » Fri Mar 10, 2006 8:30 pm

Hello James,

this 192kHz 'Complex' crash should be fixed within the latest beta: Live 5.2b6
http://www.ableton.com/forum/viewtopic.php?t=35397

regards,
/Alex