Ableton Forum

I´ve been to a few concerts with "laptop"-artists and alot of them use Live with external mixers (small Behringer often). I dont understand why/how they use them and for what purpose?
It seems that a lot of them only use the internal soundcard (most of them have used Mac) so they only have one channel going to the mixer.

Do they use the EQ in the mixer or
Can someone please enlighten me on this subject.

Thanks

my guess would be either they are making use of external effects (or built-in effects on the mixer), other outboard gear (synths, samplers, etc), feedback loops, etc.

or maybe they just want a way to boost their output signal from the laptop and get a good balanced or line out to send to the club's PA.

next time just ask one of them.

I use an indigo Dj soundcard and run it into my dj mixer, I like having the knobs for EQ, I also use a kaoos pad post the mixer. I have got an ozone for midi control...

I like having easier access to the EQ and level on the external mixer. Plus like it was already stated, some mixers send a better, louder signal out to the PA than many audio interfaces. You can also have easier access to a cue, and you don't have to use up one of your available audio channels in Live.

I just bought by Behringer UB2442FX-Pro mixer and LOVE using it with live.

I play electric guitar with an acoustic player and we can have all the outputs coming from Live mixed with our guitar signals so we can dictate our own monitor mix. Then each individual channel from Live and our guitars are sent to the FOH console.

It works GREAT!

I use my Allen & Heath Xone62 with an Indigo DJ card for live sets. The main mix goes to one channel, and my 'lead' intrument in Live goes to another channel. This way I can use the DJ mixer's filters and EQ (which sound better than software) to affect just the lead or just the main mix. Also, it lets me patch my iPod Mini onto a third channel, which I use as a backup in case the laptop suddenly crashes during a show. Thankfully this has never happened though.

I indeed also use a DJ mixer with Ableton (a Xone 92) in my new live-setup.
I use the MIDI features from the mixer to control Ableton, and I also like to use the filters and EQ from the mixer.

rkampschoer wrote:I indeed also use a DJ mixer with Ableton (a Xone 92) in my new live-setup.
I use the MIDI features from the mixer to control Ableton, and I also like to use the filters and EQ from the mixer.

I checked out your website. Like your setup. Cool.

To 16 BIT:

Thanks for the compliment!

To klacke:

There are also artists who use more channels from a DJ mixer, I use my DJ mixer purely for Ableton (all 4 channels).

rkampschoer wrote:To 16 BIT:

Thanks for the compliment!

To klacke:

There are also artists who use more channels from a DJ mixer, I use my DJ mixer purely for Ableton (all 4 channels).

I have now studied your setup and have no changed my setup to simulate yours. I wasnt using my DJ mixer in the studio before and its turning out be a very good move. Even subbing mixes through the Xone 92 seems to sound better.

Hope you dont mind me stealing your setup idea.

Thanks again

haha, no problem

I think you get a very nice sound if you use the high-end analog filters and EQ from the A&H in combination with ableton.

Which soundcard are you using/planning to use?

uummm... we run 2 powerbooks with 2 Multifaces each doing 8 outputs into a Behringer Eurorack 16ch mixer with 4 sends of hardware FX.

...but then we're silly




Now back to our scheduled thread

lol, then I must be silly too!

I used to carry around huge loads of studio gear as well (see the pics section on my web-site).
Now I only do this when I have a really long live performance...

I think it's pretty clear now why a lot of us use DJ mixers in combination with Live.