THIS is how to setup Behringer FCB1010/Ableton/Looper

Share your favorite Ableton Live tips, tricks, and techniques.
apolk
Posts: 3
Joined: Sat May 26, 2018 2:13 pm

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by apolk » Sat May 26, 2018 2:35 pm

I can't get the FCB 1010 Expression Pedals to work. (Although on/off functions work great using note values - thanks for that tip!) Anyone have a solution for using the expression pedals for slider controls?

IvanJones
Posts: 14
Joined: Wed Feb 22, 2012 1:22 am

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by IvanJones » Sun Jul 21, 2019 1:31 pm

When I assign a preset to a note then map it to turn on an audio effect, it immediately turns itself off. Any ideas why?

MarkMusic
Posts: 4
Joined: Sun Dec 27, 2020 10:51 am

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by MarkMusic » Thu Dec 31, 2020 1:35 pm

Thanks to everyone for the help and info.

If anyone arrives here post 31-12-2020 and is looking for a working version that makes the FCB1010 Ableton 10.1.30 compatible with a few clicks, check out

https://github.com/format19/FCB1010

Ironlion
Posts: 58
Joined: Sun Sep 07, 2014 7:32 pm

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by Ironlion » Sun Nov 27, 2022 4:56 pm

Angstrom wrote:
Tue Sep 05, 2017 3:44 pm
If anyone else is still using one of these and has a little knowledge of programming Python I advise making your own ableton controller script for it.

My own BCF1010 script is made for acting on the current clip slot, because if I want to record a clip my hands are busy so it helps to punch in with my feet, also when I want to record automation that takes up both hands so again ... feet!
My layout has the bottom left pedal as "play current clip" then Session Overdub, Undo, Redo, Delete.
Then the top row is "set to a base 2 loop length" (2,4,8,16), then "double loop", quantise, do swing (on selected clip), then the last pedal I leave un assigned.

It's much more useful this way. Worth trying out.
Regarding freeing up hands, the clip slot looper is also helpful: https://performancelooper.com/product/a ... eton-live/
Clip Slot Looper for Ableton: https://performancelooper.com/shop/

brightond
Posts: 2
Joined: Fri Feb 03, 2023 10:34 pm

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by brightond » Fri Feb 03, 2023 10:38 pm

Why is this FCB1010 so freaking difficult to get Ableton to see it? I've spent hours trying to have the FCB1010 show up in the control surfaces to no avail.

I have factory defaulted the FCB1010
I have installed the FCB1010 Manager and sent the preset
I have copied the FCB1010 script folder into the ableton midi scripts folder
I have tried running Ableton as administrator
I have tried removing the Midi In cable

Do i need to put the FCB1010 into a certain mode for it to at least see it as a control surface? I am really perplexed as to how this is so complicated.

ANY advice would be greatly appreciated.

brightond
Posts: 2
Joined: Fri Feb 03, 2023 10:34 pm

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by brightond » Sat Feb 04, 2023 7:06 pm

OK, I am at least now able to see the FCB1010 listed under control surfaces after finding another script and adding that to the resources/midi scripts folder.

But, that's all I have. There's still no communication between the FCB and Ableton. Is there any way to test that the midi commands are being sent to the computer? Any further troubleshooting steps?

Ironlion
Posts: 58
Joined: Sun Sep 07, 2014 7:32 pm

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by Ironlion » Sun Feb 05, 2023 12:45 am

Not sure what you're trying to do, but one important detail I discovered about the FCB1010, is that VST3 does not support program change MIDI signals. So if you're if you're interfacing with a VST and need to send program changes, make sure you're using VST 2.

Since this thread is about looping: If you happen to be a guitar player, as I am, you may find this device super useful: https://performancelooper.com/product/a ... eton-live/

ToBe
Posts: 55
Joined: Wed Nov 04, 2009 9:26 pm
Contact:

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by ToBe » Mon Oct 09, 2023 12:39 pm

IF you have M4L and want to use your FCB 1010 out of the box with Ableton Live I would say using the FCB 1010 CONTROL Max for Live device is probably to quickest way to set things up. Full info here: https://blog.abletondrummer.com/fcb-101 ... eton-live/

and here is a full video run-through which explains how it works and how to set it up: https://www.youtube.com/watch?v=UFNR5POFCFM
(FREE) MAX for LIVE devices
http://blog.abletondrummer.com/free-max ... e-devices/

ABLETON LIVE for (but not only) DRUMMERS
http://www.abletondrummer.com

ToBe
Posts: 55
Joined: Wed Nov 04, 2009 9:26 pm
Contact:

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by ToBe » Thu Nov 16, 2023 12:48 pm

Here is the Max for Live device which makes using the Behringer FCB 1010 with Ableton Live very, very easy to set up as it takes the MIDI messages from the factory presets from the FB1010.

More info is available here: https://blog.abletondrummer.com/fcb-101 ... eton-live/

Image
(FREE) MAX for LIVE devices
http://blog.abletondrummer.com/free-max ... e-devices/

ABLETON LIVE for (but not only) DRUMMERS
http://www.abletondrummer.com

ToBe
Posts: 55
Joined: Wed Nov 04, 2009 9:26 pm
Contact:

Re: THIS is how to setup Behringer FCB1010/Ableton/Looper

Post by ToBe » Wed Feb 21, 2024 10:25 pm

Hey it looks like I m a little late to the party as the original post is from over 10 years ago but maybe someone is still interested and reading this: Here is a new option for setting up the Behringer FCB 1010 with Ableton Live via a Max for Live device - pretty much plug and play.

It works for using the FCB1010 in its factory + out of box settings (which are MIDI Program Changes) and just going into a the FCB1010 Control Max for Live device on a MIDI Track. Via the M4L device for the FCB1010 you can then set up control presets for the stomp pedals and MAP the pedals to controls inside of Ableton Live. You can find out more about the FCB1010 Control Max for Live device here: https://blog.abletondrummer.com/fcb-101 ... eton-live/

Cheers
(FREE) MAX for LIVE devices
http://blog.abletondrummer.com/free-max ... e-devices/

ABLETON LIVE for (but not only) DRUMMERS
http://www.abletondrummer.com

Post Reply