Share your Ableton Live secrets here
Post Reply
Mr Lager
Posts: 77
Joined: Wed Jul 04, 2007 2:32 pm


Post by Mr Lager » Sat Jul 12, 2008 5:59 pm

Can anyone reccomend some quality Jack leads that are good at minimising static hiss when recording from my Hardware?
Or should i be addressing a different section of the recording step - ie sound card?
reason I mention cables is that they all seem to vary in static hiss level.

Posts: 11646
Joined: Thu Jun 24, 2004 2:15 pm
Location: Denmark

Post by Machinate » Sun Jul 13, 2008 12:54 pm

good thick microphone cables with a ton of shielding. Solder your own and save a bundle. If you have balanced outputs on your equipment then make balanced cables, too.

If it's really bad you could get a d.i. box and record from there.

Posts: 8
Joined: Fri Jun 08, 2007 4:52 am

Post by tedpallas » Sun Jul 13, 2008 6:50 pm

Unless you're using old, sketchy cable, I doubt that the cable itself is the source of your hiss. It might be a good idea to check your equipment first and judge from there. Whirlwind makes a dependable cable - buy one and suss out the issue from there.

Post Reply