Page 1 of 1
192k support hosed in 8.2.2b3?
Posted: Thu Feb 17, 2011 9:41 pm
by jbodango
Live was behaving nicely with sampling rate 192k setting as of 8.2.1... but I can't get 8.2.2b3 to work
I've tried several combinations of switching my MOTU Traveler from 44,48,or 96 to 192k, pre and post startup of Ableton. I've tried changing the settings via Ableton's Preferences, and also from the MOTU configuration app. I've been sure to close the configuration app when Ableton is running. I've also tried updating the drivers, and clearing the config settings of Ableton.
I've been able to reproduce this issue on both osx 10.6.5 and 10.6.6.
Any suggestions or explanation whats going on?
Mac Pro (late 2008) 8 core, 14GB ram
MOTU Traveler
Re: 192k support hosed in 8.2.2b3?
Posted: Sun Feb 20, 2011 7:37 am
by jbodango
and on 10.7 now as well.
Re: 192k support hosed in 8.2.2b3?
Posted: Tue Feb 22, 2011 6:37 pm
by [pgr]
Hi,
thanks for your report. I briefly checked Live 8.2.1 and 8.2.2b3 with a MOTU Traveler and a Sample Rate of 192khz and it worked well. Also, I could change the Sample Rate in Live's preferences as well as in MOTU's Audio Setup.
If the problem persists, please send an e-mail to
support@ableton.com that contains the following information:
- which version of the MOTU Traveler are you using, also which Firmware- and driver-version?
- the exact phenomenon you experience
- a valid Live 8.2.2b3 Status Report (to be created via the "Help" menu)
Thank you!
Best,
Philipp
Re: 192k support hosed in 8.2.2b3?
Posted: Thu Feb 24, 2011 11:51 am
by cids
@ jbodango Just curious, how did you manage to test on 10.7...?
Re: 192k support hosed in 8.2.2b3?
Posted: Thu Feb 24, 2011 8:56 pm
by jbodango
retracted
Re: 192k support hosed in 8.2.2b3?
Posted: Thu Feb 24, 2011 8:59 pm
by jbodango
[pgr] wrote:Hi,
thanks for your report. I briefly checked Live 8.2.1 and 8.2.2b3 with a MOTU Traveler and a Sample Rate of 192khz and it worked well. Also, I could change the Sample Rate in Live's preferences as well as in MOTU's Audio Setup.
If the problem persists, please send an e-mail to
support@ableton.com that contains the following information:
- which version of the MOTU Traveler are you using, also which Firmware- and driver-version?
- the exact phenomenon you experience
- a valid Live 8.2.2b3 Status Report (to be created via the "Help" menu)
Thank you!
Best,
Philipp
Thanks for the follow up Philipp.
I'll send an email.
Cheers,
jda
Re: 192k support hosed in 8.2.2b3?
Posted: Fri Feb 25, 2011 6:36 am
by jbodango
Correction... I meant to say 10.6.7...
The motu configuration app doesn't work at all with 10.7