touchstrip as pitchbend in drum rack
-
- Posts: 78
- Joined: Thu Jul 14, 2005 4:49 am
- Location: melbourne AU
- Contact:
touchstrip as pitchbend in drum rack
Is there a way to use the touch strip as a pitch bend in a drum rack, instead of the scrolling behaviour?
One of my favourite things is pitch bend individual drum hits. I realise I could probably make up a m4l device to do this and apply it to an encoder - but I really like that touchstrip!
One of my favourite things is pitch bend individual drum hits. I realise I could probably make up a m4l device to do this and apply it to an encoder - but I really like that touchstrip!
-
- Posts: 78
- Joined: Thu Jul 14, 2005 4:49 am
- Location: melbourne AU
- Contact:
Re: touchstrip as pitchbend in drum rack
I just saw this video whch pretty much does what I'm looking for. Any idea how this is done?
https://www.youtube.com/watch?feature=p ... EMZxZKhSXc#!
he's using the touchstrip to "scratch" a sample
https://www.youtube.com/watch?feature=p ... EMZxZKhSXc#!
he's using the touchstrip to "scratch" a sample
Re: touchstrip as pitchbend in drum rack
yeah I'd like that too
you can of course access pitch parameters in a lot of the kits, but it's not the same
personally I would be happy to just use the octave up/down buttons to access different parts of the kit. Most of the time I just use the 16 pads anyway and load another kit if I want more, it's easier to manage that way
from that guy's youtube that you linked:
you can of course access pitch parameters in a lot of the kits, but it's not the same
personally I would be happy to just use the octave up/down buttons to access different parts of the kit. Most of the time I just use the 16 pads anyway and load another kit if I want more, it's easier to manage that way
from that guy's youtube that you linked:
Pretty busy, but here's the rundown: The initial release of 9 (not the Beta update) allowed for mapping of the pitch bend and would override the normal command to switch octaves in the drum rack. Once I installed and ran the Beta update this was no longer true. After some messing around, I found that the User mode (which looks for All Ins, but not Push input) would allow for notes but no feedback so I can use it like I did in the video, just with no lights.
-
- Posts: 78
- Joined: Thu Jul 14, 2005 4:49 am
- Location: melbourne AU
- Contact:
Re: touchstrip as pitchbend in drum rack
ah.. thanks for that Youtube quote. That makes sense. I hope it's (re)implemented... the touchstrip is great, I need that way more than scrolling. the octave up and down would be fine too.
Re: touchstrip as pitchbend in drum rack
yeah, its very odd. The octave up down buttons accomplish exactly the same thing, why give up the primary continuous controller for a duplicate function?
-
- Posts: 66
- Joined: Thu Oct 03, 2013 11:35 am
Re: touchstrip as pitchbend in drum rack
he guys, have you had any luck accomplishing this?
basically the only thing i need to figure out and im all set
basically the only thing i need to figure out and im all set
-
- Posts: 13
- Joined: Fri May 24, 2013 7:56 pm
- Location: Antwerp, Belgium
- Contact:
Re: touchstrip as pitchbend in drum rack
Hi Guys, wouldn't it make sense to use the 4x4 finger drum rack mode to play 16 pitches of a selected sound? ie. play notes of your percussion hits? the velocity 'layout' is similar in behaviour...and as added behaviour the touchstrip can be used as pitch bend. Octave up and down buttons can be used for navigating trough drum racks.thomashalp wrote:he guys, have you had any luck accomplishing this?
basically the only thing i need to figure out and im all set
-
- Posts: 3
- Joined: Sun May 28, 2017 3:38 pm
Re: touchstrip as pitchbend in drum rack
You can hold "Select" and tap the strip now
http://djtechtools.com/2015/02/24/ablet ... d-warping/
http://djtechtools.com/2015/02/24/ablet ... d-warping/
Re: touchstrip as pitchbend in drum rack
james_womack wrote:You can hold "Select" and tap the strip now
http://djtechtools.com/2015/02/24/ablet ... d-warping/
That is only in instrument mode. We want it to work in drum rack mode.
-
- Posts: 53
- Joined: Mon Jan 04, 2016 9:04 am
Re: touchstrip as pitchbend in drum rack
Hmmm.. I'm amazed this limitation has not been addressed yet!