Ubermap config file thread

Come here to discuss Push with other users.
For tech support, please head to http://www.ableton.com/help
Airyck
Posts: 726
Joined: Thu Jul 02, 2009 11:54 pm
Location: Phoenix, AZ

Re: Ubermap config file thread

Post by Airyck » Wed Apr 16, 2014 1:53 am

I've also had the same thing happen and I really think it comes down to what parameters we chose to display in the preset ahead of time before doing the mapping. This is one reason I'm deciding to make presets for my mappings as well so that the Ubermap works across all of the presets. Of course you'll be able to change it later once the original hash file is stored

As far as the numbers go, I remove them manually just for neatness' sake.
I'll let you know how the Cypher map works out.
http://www.soundcloud.com/airyck-sterrett
Ableton Live 10 Suite / Push 2 / Max 7 & 8 /
2016 Macbook Pro 15"
Too much hardware to list

fistikuffs
Posts: 108
Joined: Thu Feb 28, 2013 1:42 pm

Re: Ubermap config file thread

Post by fistikuffs » Wed Apr 16, 2014 6:50 am

Airyck wrote:I've also had the same thing happen and I really think it comes down to what parameters we chose to display in the preset ahead of time before doing the mapping. This is one reason I'm deciding to make presets for my mappings as well so that the Ubermap works across all of the presets. Of course you'll be able to change it later once the original hash file is stored

As far as the numbers go, I remove them manually just for neatness' sake.
I'll let you know how the Cypher map works out.
Ah ok, any mappings I've done have been with the init presets. If I get you right, is it possible for me to get something like Alloy to display different parameters in the config file by generating the config from a preset rather than from the init patch? If so, then I've got a busy weekend ahead of me! :D

Airyck
Posts: 726
Joined: Thu Jul 02, 2009 11:54 pm
Location: Phoenix, AZ

Re: Ubermap config file thread

Post by Airyck » Wed Apr 16, 2014 4:00 pm

fistikuffs wrote:
Airyck wrote:I've also had the same thing happen and I really think it comes down to what parameters we chose to display in the preset ahead of time before doing the mapping. This is one reason I'm deciding to make presets for my mappings as well so that the Ubermap works across all of the presets. Of course you'll be able to change it later once the original hash file is stored

As far as the numbers go, I remove them manually just for neatness' sake.
I'll let you know how the Cypher map works out.
Ah ok, any mappings I've done have been with the init presets. If I get you right, is it possible for me to get something like Alloy to display different parameters in the config file by generating the config from a preset rather than from the init patch? If so, then I've got a busy weekend ahead of me! :D
If you re-arrange the controls in the Ableton config (the one with the arrow and config button in the GUI) you will get a different hash file for each different arrangement, you then group that and save it (as whatever you want to call that config). Then you can have a different layout by editing each of the unique .cfg files. As long as your layout gets re-loaded the same (hence saving it after grouping it) you will be able use different configs for different arrangements of controls for the same plugin. You just have to determine which config goes with which (shouldn't be too hard).

In short, yes you can have as many different layouts for a plug as you want (at least as many as you have controls for the plugin).

If you need any clarification or more description let me know. :)

This is also good for plugins with more than 128 parameters because you can manually create your config in Ableton to include only the controls you want and then modify the config after saving it as a group preset. Then when you load it your custom set of controls will always be the same, which means your hash file will be the same, which means your custom config will be the same.
http://www.soundcloud.com/airyck-sterrett
Ableton Live 10 Suite / Push 2 / Max 7 & 8 /
2016 Macbook Pro 15"
Too much hardware to list

fistikuffs
Posts: 108
Joined: Thu Feb 28, 2013 1:42 pm

Re: Ubermap config file thread

Post by fistikuffs » Thu Apr 17, 2014 8:37 am

Airyck wrote:
fistikuffs wrote:
Airyck wrote:I've also had the same thing happen and I really think it comes down to what parameters we chose to display in the preset ahead of time before doing the mapping. This is one reason I'm deciding to make presets for my mappings as well so that the Ubermap works across all of the presets. Of course you'll be able to change it later once the original hash file is stored

As far as the numbers go, I remove them manually just for neatness' sake.
I'll let you know how the Cypher map works out.
Ah ok, any mappings I've done have been with the init presets. If I get you right, is it possible for me to get something like Alloy to display different parameters in the config file by generating the config from a preset rather than from the init patch? If so, then I've got a busy weekend ahead of me! :D
If you re-arrange the controls in the Ableton config (the one with the arrow and config button in the GUI) you will get a different hash file for each different arrangement, you then group that and save it (as whatever you want to call that config). Then you can have a different layout by editing each of the unique .cfg files. As long as your layout gets re-loaded the same (hence saving it after grouping it) you will be able use different configs for different arrangements of controls for the same plugin. You just have to determine which config goes with which (shouldn't be too hard).

In short, yes you can have as many different layouts for a plug as you want (at least as many as you have controls for the plugin).

If you need any clarification or more description let me know. :)

This is also good for plugins with more than 128 parameters because you can manually create your config in Ableton to include only the controls you want and then modify the config after saving it as a group preset. Then when you load it your custom set of controls will always be the same, which means your hash file will be the same, which means your custom config will be the same.
Cool, thanks man. I'll give this a go!

login
Posts: 1816
Joined: Sat Jul 16, 2011 12:41 am

Re: Ubermap config file thread

Post by login » Sat May 24, 2014 1:19 am

Valhalla Vintage verb

Code: Select all

[Banks]
[[Bank 1]]
1_Mix = Mix
2_PreDelay = PreDelay
3_Decay = Decay
17_ReverbMode = ReverbMode
16_ColorMode = ColorMode
4_Size = Size
5_Attack = Attack

[[Bank 2]]
10_EarlyDiffusion = EarlyDiffusion
11_LateDiffusion = LateDiffusion
12_ModRate = ModRate
13_ModDepth = ModDepth
14_HighCut = HighCut
15_LowCut = LowCut

[[Bank 3]]
9_HighFreq = HighFreq
6_BassMult = BassMult
7_BassXover = BassXover
8_HighShelf = HighShelf

[BestOfBank]
[[Bank]]
1_Mix = Mix
2_PreDelay = PreDelay
3_Decay = Decay
17_ReverbMode = ReverbMode
16_ColorMode = ColorMode
4_Size = Size
5_Attack = Attack

[Config]
Cache = False
Ignore = False

svire
Posts: 11
Joined: Mon Jun 02, 2014 6:22 pm

Re: Ubermap config file thread

Post by svire » Wed Jun 04, 2014 11:09 pm

So, can ubermap for 3rd party plugins and community mappings for live devices work together?

Evengy
Posts: 451
Joined: Wed Jan 13, 2010 8:31 am

Re: Ubermap config file thread

Post by Evengy » Fri Jun 06, 2014 11:13 am

svire wrote:So, can ubermap for 3rd party plugins and community mappings for live devices work together?
Ubermap includes the community mappings! :)

Beni Shoga
Posts: 5
Joined: Mon Oct 29, 2012 12:06 pm

Re: Ubermap config file thread

Post by Beni Shoga » Tue Jun 24, 2014 7:40 am

The Satin mapping on this thread doesn't work for me, I get a blank Push screen. The one included in the installer isn't laid out properly either. Any help, please?

monsoonmoon
Posts: 27
Joined: Tue May 19, 2009 2:53 pm

Re: Ubermap config file thread

Post by monsoonmoon » Fri Aug 08, 2014 11:18 am

I have a question...

If I group a plugin effect then I always see the Macro 1-8 labels on Push and I have to hit the little right-arrow button to see my custom labels that I've configured in the text file via Ubermap.

Is it possible to hide or get rid of the Macro1-8 labels?

It's very annoying to have an extra step every time when selecting a device to edit!

Thanks :)

tedlogan
Posts: 1343
Joined: Thu Dec 20, 2012 7:23 pm
Location: Leamington Spa, UK
Contact:

Re: Ubermap config file thread

Post by tedlogan » Fri Aug 08, 2014 11:56 am

Beni Shoga wrote:The Satin mapping on this thread doesn't work for me, I get a blank Push screen. The one included in the installer isn't laid out properly either. Any help, please?
maybe try deleting the 9th (was lazy) parameters under both "STUDIO" and "DELAY" banks. I haven't used that mapping since I first posted it months ago, but it worked then. Sorry I can't be of any more help atm, at work etc.

cyclicAMP
Posts: 118
Joined: Thu Mar 07, 2013 1:58 am

Re: Ubermap config file thread

Post by cyclicAMP » Tue Aug 19, 2014 2:56 am

Has anyone been able to rename parameters with Native Instruments vst's? I have tried with Massive, Razor, and Driver with no luck.
:cry:

GravityFlow
Posts: 6
Joined: Wed Feb 12, 2014 9:55 am

Re: Ubermap config file thread

Post by GravityFlow » Sat Feb 14, 2015 10:25 am

Amazing Noises Dark Synth Ubermap Mapping:

Mapping is following the appearance of controls in the m4l device

Code: Select all

[Banks]
[[SPECT1]]
203_harmonics = Overtones
202_waveforms = FillSpec
63_Smoothing = Smoothing
175_retrig_comps = Reset
211_brickwall1 = Brick X
212_brickwall2 = Brick Y
74_brickw_reset = ResetBrick
75_Comb = Comb
[[SPECT2]]
77_consolidate = Freeze
219_Saturation = Saturation
82_density = Density
76_comb_rotation = Shift
133_mask_depth = Dry/Wet
[[OSC ADD]]
160_oscillators = Generators
93_fund_distribution = Distribution
164_phase_rnd = RndPhase
94_fund_spread = Pitch Spread
30_2nd_simmetry = OSC Ratio
[[OSC SUB]]
204_2nd_on_off = SUB on
31_Tune = Tune
1_choose_2nd_env = SubEnv
29_2nd_oscil = Waveform
30_2nd_simmetry = Ratio
28_2nd_finetuning = Fine
32_2ndcolor = Color
[[FILTER]]
92_filter_on_off = FiltON
49_Filter_type = Type
80_Cutoff = Cutoff
131_Resonance = Resonance
86_filter_drywet = ADD wet
84_filter_2nddrywet = SUB wet
79_Depth = Depth
[[FX]]
218_Stretch = Stretch
52_Overdrive = Overdrive
176_Ring Mod = Ring Mod
170_pre_post_2ndenv = Pre
[[AMP]]
73_Attack = Attack
81_Decay = Decay
181_Sustain = Sustain
174_Release = Release
83_exp_env = Curve
198_vel_sens = VelSens
[[GLOBAL]]
159_mono_poly = Voices
111_legato_mode = Legato
96_glide = Glide
182_Transpose = Transpose
95_Gain = Gain
[[SpecMd1]]
150_mod_brkw1_lfo_on_off = Brick X
8_choose_mod_brkw1_lfo = Source
213_mod_brkw1_lfo_depth = Amount
"l1" = " "
"l2" = " "
151_mod_brkw2_lfo_on_off = Brick Y
9_choose_mod_brkw2_lfo = Source
214_mod_brkw2_lfo_depth = Amount
[[SpecMd2]]
157_mod_satur_lfo_on_off = Saturation
13_choose_mod_satur_lfo = Source
216_mod_satur_lfo_depth = Amount
"l3" = " "
"l4" = " "
154_mod_dens_lfo_on_off = Density
11_choose_mod_dens_lfo = Source
153_mod_dens_lfo_depth = Source
[[SpecMd3]]
156_mod_drywet_lfo_on_off = Dry/Wet
12_choose_mod_drywet_lfo = Source
155_mod_drywet_lfo_depth = Amount
"l5" = " "
"l6" = " "
152_mod_comb_lfo_on_off = Comb
10_choose_mod_comb_lfo = Source
215_mod_comb_lfo_depth = Amount
[[SpecMod4]]
158_mod_shift_lfo_on_off = Shift
14_choose_mod_shift_lfo = Source
217_mod_shift_lfo_depth = Amount
"l7" = " "
178_special_f_on_off = SpecFil
50_Fund = Fdmntls
51_Octaves = Octaves
27_2ndH = OctHR
[[SpecMd5]]
44_Fifths = Fifths
33_3rdH = FfthHR
68_Thirds = Thirds
34_5thH = ThrdHR
62_Sevenths = Sevenths
35_7thH = SvnthHR
[[Pitch 1]]
55_P_Env_on_off = PtchEnv
163_p_env_main_on_off = ADD
162_p_env_2nd_on_off = SUB
54_P_Env_Mode = Mode
"x1" = " "
53_P_Atk_on_off = EnvSTART
166_pitch_env_trigger = Retrig
56_P_Rel_on_off = EnvEND
[[Pitch 2]]
102_Key>Atk = Key>Atk
188_Vel>Atk = Vel>Atk
"l8" = " "
"l9" = " "
"l10" = " "
"l11" = " "
110_Key>Rel = Key>Rel
197_Vel>Rel = Vel>Rel
[[Pitch 3]]
58_Attack = Attack
59_Pitch_Exp_Atk = Exp
65_Start = Start
"l12" = " "
"l13" = " "
61_Release = Release
60_Pitch_Exp_Rel = Exp
39_End = End
[[PtchMOD]]
57_P_lfo_on_off = PtchMOD
15_choose_pitch_lfo = Source
168_pitch_lfo_global = Global
"x2" = " "
167_Depth = Depth
"x3" = " "
169_pitch_lfo_trigger = Retrig
165_pitch_LFO_fadein = Fade In
[[KeyFlw]]
105_Keyfollow = ADDKeyflw
173_Rand Pitch = ADDRdPtch
"x3" = ""
"x4" = ""
"x5" = ""
"x6" = ""
97_Keyfollow = SUBKeyflw
171_Rand Pitch = SUBRdPtch
[[FLTenv1]]
3_choose_filter_env = Source
41_F_Env_Mode = Mode
40_F_Atk_on_off = EnvSTART
87_filter_env_trigger = Retrig
42_F_Rel_on_off = EnvEND
189_Velocity>Cutoff = Vel>Cutoff
172_Random>Cutoff = Rnd>Cutoff
103_Keyfollow = Keyfollow
[[FLTenv2]]
45_Attack = Attack
46_Filter_Exp_Atk = ATK exp
99_Key>Atk = Key>Atk
185_Vel>Atk = Vel>Atk
107_Key>Rel = Key>Rel
194_Vel>Rel = Vel>Rel
47_Filter_Exp_Rel = REL exp
48_Release = Release
[[F-MOD]]
43_F_lfo_on_off = F-MOD
4_choose_filter_lfo = Source
90_filter_lfo_global = Global
"y1" = ""
88_Depth = Depth
"y2" = ""
91_filter_lfo_trigger = Retrig
85_filter_LFO_fadein = Fade In
[[AMPenv]]
184_Attack = VelAtk
190_Decay = VelDec
193_Release = VelRel
98_Attack = KeyAtk
104_Decay = KeyDec
106_Release = KeyRel
200_Wave Norm = WavNorm
201_Norm Speed = NorSpeed
[[Amp-MOD]]
36_A_lfo_on_off = AmpMOD
2_choose_amp_lfo = Source
71_amp_lfo_global = Global
"z1" = ""
70_Depth = Depth
"z2" = ""
72_amp_lfo_trigger = Retrig
69_amp_LFO_fadein = Fade In
[[LFO1Free]]
116_lfo1_on_off = LFO 1
5_choose_lfo1 = Waveform
117_lfo1_ratio = Ratio
113_Freq = Freq
20_lfo1_modswitch = FreqMod
114_lfo1_mod_depth = FmodDepth
19_lfo1_amp_modswitch = AmpMod
112_lfo1_amp_mod_depth = AmodDepth
[[LFO1Sync]]
25_lfo1_timing = Timing
16_Rate = Rate
115_lfo1_mult = Mult
117_lfo1_ratio = Ratio
20_lfo1_modswitch = FreqMod
114_lfo1_mod_depth = FmodDepth
19_lfo1_amp_modswitch = AmpMod
112_lfo1_amp_mod_depth = AmodDepth
[[LFO2Free]]
122_lfo2_on_off = LFO 2
6_choose_lfo2 = Waveform
123_lfo2_ratio = Ratio
119_Freq = Freq
22_lfo2_modswitch = FreqMod
120_lfo2_mod_depth = FmodDepth
21_lfo2_amp_modswitch = AmpMod
118_lfo2_amp_mod_depth = AmodDepth
[[LFO2Sync]]
124_lfo2_timing = Timing
17_Rate = Rate
121_lfo2_mult = Mult
123_lfo2_ratio = Ratio
22_lfo2_modswitch = FreqMod
120_lfo2_mod_depth = FmodDepth
21_lfo2_amp_modswitch = AmpMod
118_lfo2_amp_mod_depth = AmodDepth
[[LFO3Free]]
129_lfo3_on_off = LFO 3
7_choose_lfo3 = Waveform
130_lfo3_ratio = Ratio
126_Freq = Freq
24_lfo3_modswitch = FreqMod
127_lfo3_mod_depth = FmodDepth
23_lfor3_amp_modswitch = AmpMod
125_lfo3_amp_mod_depth = AmodDepth
[[LFO3Sync]]
26_lfo3_timing = Timing
18_Rate = Rate
128_lfo3_mult = Mult
130_lfo3_ratio = Ratio
24_lfo3_modswitch = FreqMod
127_lfo3_mod_depth = FmodDepth
23_lfo3_amp_modswitch = AmpMod
125_lfo3_amp_mod_depth = AmodDepth
[[MOD1 p1]]
136_mod1_Env_Mode = EnvMode
141_mod1_env_trigger = Retrig
135_mod1_Atk_on_off = AtkEnv
134_Attack = Attack
137_mod1_Exp_Atk = AtkEXP
140_mod1_Rel_on_off = RelEnv
139_Release = Release
138_mod1_Exp_Rel = RelEXP
[[MOD1 p2]]
191_vel_mod1_sens = Vel Sens
186_Vel>Atk = Vel>Atk
100_Key>Atk = Key>Atk
195_Vel>Rel = Vel>Rel
108_Key>Rel = Key>Rel
[[MOD2 p1]]
144_mod2_Env_Mode = EnvMode
149_mod2_env_trigger = Retrig
143_mod2_Atk_on_off = AtkEnv
142_Attack = Attack
145_mod2_Exp_Atk = AtkEXP
148_mod2_Rel_on_off = RelEnv
147_Release = Release
146_mod2_Exp_Rel = RelEXP
[[MOD2 p2]]
192_vel_mod2_sens = Vel Sens
187_Vel>Atk = Vel>Atk
101_Key>Atk = Key>Atk
196_Vel>Rel = Vel>Rel
109_Key>Rel = Key>Rel
[[Glob p1]]
67_Width = GSS Width
66_Separation = GSS Separ
64_Granularity = GSS Grnl
132_Fine Tuning = FineTune
210_osc_wavefade = OscWvefd
209_osc_bandlimit = AddBdLmt
208_mod_bandlimit = ModBdLmt
37_Band Limit Cut = BdLmtCUT
[[MIDI p1]]
78_cut_at = AT Cutoff
180_str_at = AT Stretch
161_ov_at = AT OvrDr
177_rm_at = AT RngMod

[[MIDI p2]]
38_Bend_range = PB Range
207_midi_vibr_on_off = FrqLFO
199_vibrato_controller = MIDICtrl
206_midi_trem_on_off = AmpLFO
183_tremolo_controller = MIDICtrl
205_midi_filterlfo_on_off = FltLFO
89_filter_lfo_controller = MIDICtrl

[BestOfBank]
[[Bank]]
80_Cutoff = Cutoff
131_Resonance = Resonance
88_Depth = Depth
73_Attack = AmpAtk
81_Decay = AmpDec
181_Sustain = AmpSus
174_Release = AmpRel
95_Gain = Gain
[Config]
Cache = False
Ignore = False
15 MacBook Pro Retina, SSD, 16 GB, Live Suite, Push + Ubermap, Livid Code, Traktor Audio 2, Puremagnetik Century, Arturia V Collection 3

Stromkraft
Posts: 7033
Joined: Wed Jun 25, 2014 11:34 am

Re: Ubermap config file thread

Post by Stromkraft » Sat Feb 14, 2015 1:02 pm

cyclicAMP wrote:Has anyone been able to rename parameters with Native Instruments vst's? I have tried with Massive, Razor, and Driver with no luck.
:cry:
I'm working on Razor at the moment. It seems to be dependent on the actual ensemble in use, so make sure you have one user ensemble that you always use.

My mapping was working quite well, but then I changed ensemble and lost the contact with the mapping file. I'm also working on Spark.
Make some music!

lovelight
Posts: 238
Joined: Thu Oct 13, 2005 9:01 pm
Contact:

Re: Ubermap config file thread

Post by lovelight » Sun Feb 15, 2015 2:19 pm

is there a Ubermap or razer or phyton for dummyes, i dont havent a clue about programming, and just make preset racks, it takes forever, and it reload the vst, instead of only the preset.
so is there and easy way to understand this stuff you all here are talking about? seem really smart.)

GravityFlow
Posts: 6
Joined: Wed Feb 12, 2014 9:55 am

Re: Ubermap config file thread

Post by GravityFlow » Sun Feb 15, 2015 6:49 pm

lovelight wrote:is there a Ubermap or razer or phyton for dummyes, i dont havent a clue about programming, and just make preset racks, it takes forever, and it reload the vst, instead of only the preset.
so is there and easy way to understand this stuff you all here are talking about? seem really smart.)
Hi Lovelight :)
just read what Tom has written in his main thread of Ubermap: viewtopic.php?f=55&t=201849
Did you know this thread?
Using Ubermap is quite easy but you have to learn the basics first. You will need a text editor to edit the custom mappings, e.g. http://www.barebones.com/products/textwrangler/
If you have any questions refer to the main thread first. If you need further personal assistance just ask there ;)
15 MacBook Pro Retina, SSD, 16 GB, Live Suite, Push + Ubermap, Livid Code, Traktor Audio 2, Puremagnetik Century, Arturia V Collection 3

Post Reply