Ubermap configs - share your VST/AU device mappings

Come here to discuss Push with other users.
For tech support, please head to http://www.ableton.com/help
Post Reply
tom_d
Posts: 229
Joined: Sat Feb 08, 2014 2:20 pm

Ubermap configs - share your VST/AU device mappings

Post by tom_d » Wed May 11, 2016 6:20 pm

A great idea suggested by peterswimm was to create a new thread for Ubermap device mappings. I'd like to find a better way to share them but this will certainly do for now!

What I will do is maintain an index in the post below to all the mappings that are posted, so it's easy to see what is here. Please try and keep this thread on topic.

Thread rules:
  • Post only one plugin mapping per post
  • Please follow the template below, as shown in viewtopic.php?p=1698212#p1698212:

    Code: Select all

    [b]Plugin name[/b]: <put the plugin name here>
    [b]Ubermap config filename[/b]: <paste the exact Ubermap config file name here>
    [b]Notes[/b]: <any notes>
    
    [b]Config:[/b]
    [code]
    <paste the entire device config here>
    
    [/code]
  • State at the top of the post what plugin this is for
  • Please state the full filename at the top of the post and include the relevant Ubermap config in a "code" block
  • If any other files are needed (e.g. plugin specific mapping config files), please include them also
For those of you who don't know, Ubermap lets you map custom layouts on Push for VST and AU plugins. There's more info in the thread at viewtopic.php?f=55&t=221501&p=1697827#p1697827.

Cheers,
Tom
Last edited by tom_d on Wed May 11, 2016 6:26 pm, edited 3 times in total.
Ubermap: simple, free bank and parameter remapping for AudioUnit and VST devices for Push and Push 2: http://ubermap.live

tom_d
Posts: 229
Joined: Sat Feb 08, 2014 2:20 pm

Re: Ubermap configs - share your VST/AU device mappings

Post by tom_d » Wed May 11, 2016 6:20 pm

Index
Last edited by tom_d on Mon May 16, 2016 8:57 am, edited 4 times in total.
Ubermap: simple, free bank and parameter remapping for AudioUnit and VST devices for Push and Push 2: http://ubermap.live

tom_d
Posts: 229
Joined: Sat Feb 08, 2014 2:20 pm

Re: Ubermap configs - share your VST/AU device mappings

Post by tom_d » Wed May 11, 2016 6:21 pm

[reserved]
Ubermap: simple, free bank and parameter remapping for AudioUnit and VST devices for Push and Push 2: http://ubermap.live

tom_d
Posts: 229
Joined: Sat Feb 08, 2014 2:20 pm

Re: Ubermap configs - share your VST/AU device mappings

Post by tom_d » Wed May 11, 2016 6:23 pm

Plugin name: D16 Devastor
Ubermap config filename: Devastor_0eda44b85eb0c26d1fab12c2bfb3922a.cfg
Notes: This is an example of how these posts should be laid out (and a useful config ;))

Config:

Code: Select all

[Banks]
[[Shaper]]
Dynamics = Dynamics
Preamp = Preamp
Threshold = Threshold
Shape = Shape
Distortion Function = Function
[[Filter 1]]
Filter 1 Type = Type
Filter 1 Route = Route
Filter 1 Cutoff = Cutoff
Filter 1 Reso/Bandwidth = Reso/Bandwidth
Filter 1 Volume = Volume
[[Filter 2]]
Filter 2 Type = Type
Filter 2 Route = Route
Filter 2 Cutoff = Cutoff
Filter 2 Reso/Bandwidth = Reso/Bandwidth
Filter 2 Volume = Volume
[[Filter 3]]
Filter 3 Type = Type
Filter 3 Route = Route
Filter 3 Cutoff = Cutoff
Filter 3 Reso/Bandwidth = Reso/Bandwidth
Filter 3 Volume = Volume
[[Output]]
Output Volume = Output Volume
FX = FX
[BestOfBank]
[[Bank]]
Dynamics = Dynamics
Preamp = Preamp
Threshold = Threshold
Shape = Shape
Filter 1 Type = Filter 1 Type
Filter 1 Route = Filter 1 Route
Filter 1 Cutoff = Filter 1 Cutoff
Filter 1 Reso/Bandwidth = Filter 1 Reso/Bandwidth
[Config]
Cache = False
Ignore = False
Ubermap: simple, free bank and parameter remapping for AudioUnit and VST devices for Push and Push 2: http://ubermap.live

AlexGodbehere
Posts: 30
Joined: Tue Jan 14, 2014 5:36 pm

Re: Ubermap configs - share your VST/AU device mappings

Post by AlexGodbehere » Fri May 13, 2016 3:51 pm

Plugin name: UAD Pultec Pro Legacy
Ubermap config filename: UAD Pultec-Pro Legacy_4616377486cb4c43aa4a8a07be8980eb
Notes: Low, mid and high frequency bands have been separated into individual banks.

Config:

Code: Select all

[Banks]
[[Low Frequency]]
3_Low Freq = Low Freq
1_LF Boost = LF Boost
2_LF Atten = LF Atten

[[Mid Range]]
11_LM Freq = LM Freq
12_LM Peak = LM Peak
13_Mid Freq = Mid Freq
14_Mid Dip = Mid Dip
15_HM Freq = HM Freq
16_HM Peak = HM Peak


[[High Frequency]]

5_HF Boost = HF Boost
6_High Freq = High Freq
7_HF Atten = HF Atten
8_HF Atten Freq = HF Atten Freq
4_HF Q = HF Bandwidth


[ParameterValues]
[ParameterValueTypes]
[Config]
Cache = False
Ignore = False


AlexGodbehere
Posts: 30
Joined: Tue Jan 14, 2014 5:36 pm

Re: Ubermap configs - share your VST/AU device mappings

Post by AlexGodbehere » Fri May 13, 2016 4:09 pm

Plugin name: UAD Precision Delay
Ubermap config filename: UAD Precision Delay Mod L_609ce3a7283bc60d60d07b566aa9d1a7
Notes:

Config:

Code: Select all

[Banks]

[[Delay]]
4_Delay A = Delay A
5_Delay B = Delay B
10_Recirc = Recirc
13_Mix = Mix
1_Mode = Mode
20_Sync = Sync
6_Link = Link
18_Level = Level

[[LFO]]
7_Rate = Rate
8_Depth = Depth
9_LFO = Type

[[Mix]]
13_Mix = Mix
11_Hi Pass = Hi Pass
12_Lo Pass = Lo Pass
15_Pan A = Pan A
16_Pan B = Pan B
17_Pan Link = Pan Link
14_Wet Solo = Wet Solo

[ParameterValues]
[ParameterValueTypes]
[Config]
Cache = False
Ignore = False


AlexGodbehere
Posts: 30
Joined: Tue Jan 14, 2014 5:36 pm

Re: Ubermap configs - share your VST/AU device mappings

Post by AlexGodbehere » Sat May 14, 2016 5:24 pm

Plugin name: Arturia Modular V2
Ubermap config filename: Modular V_b49dc3f07a01455585860245b8fdbe1c.cfg
Notes: Auto-populate mapping doesn't provide required controls. Download modified mapping from http://www30.zippyshare.com/v/VeVq3UxK/file.html and place in /Users/USERNAME/Music/Ableton/User Library/Defaults/Plug-In Configurations/Audio Units/Arturia/Modular V.

Config:

Code: Select all

[Banks]

[[Quick Access]]
2_DeTiVca1 = VCA1 Decay
4_ReTiVca1 = VCA1 Release
7_DeTiVca2 = VCA2 Decay
9_ReTiVca2 = VCA2 Release
11_CutFilt1 = F1 Cutoff
22_DeTiEnv1 = E1 Decay
24_LeSuEnv1 = E1 Release
17_RateLfo1 = LFO 1 Rate
[[VCA1]]
1_AtTiVca1 = Attack
2_DeTiVca1 = Decay
3_LeSuVca1 = Sustain
4_ReTiVca1 = Release
5_LevVca1 = Volume
[[VCA2]]
6_AtTiVca2 = Attack
7_DeTiVca2 = Decay
8_LeSuVca2 = Sustain
9_ReTiVca2 = Release
10_LevVca2 = Volume
[[Filter 1]]
11_CutFilt1 = Cutoff
12_ResFilt1 = Resonance
[[Filter 2]]
13_CutFilt2 = Cutoff
14_ResFilt2 = Resonance
[[Filter 3]]
15_CutFilt3 = Cutoff
16_ResFilt3 = Resonance
[[LFO 1]]
17_RateLfo1 = Rate
18_DelLfo1 = Delay
19_FadeLfo1 = Fade
20_WidtLfo1 = Width
[[LFO 2]]
70_RateLfo2 = Rate
71_DelLfo2 = Delay
72_FadeLfo2 = Fade
73_WidtLfo2 = Width
[[Env 1]]
21_AtTiEnv1 = Attack
22_DeTiEnv1 = Decay
23_ReTiEnv1 = Sustain
24_LeSuEnv1 = Release
[[Env 2]]
25_AtTiEnv2 = Attack
26_DeTiEnv2 = Decay
27_ReTiEnv2 = Sustain
28_LeSuEnv2 = Release
[[Env 3]]
29_AtTiEnv3 = Attack
30_DeTiEnv3 = Decay
31_ReTiEnv3 = Sustain
32_LeSuEnv3 = Release
[[Env 4]]
33_AtTiEnv4 = Attack
34_DeTiEnv4 = Decay
35_ReTiEnv4 = Sustain
36_LeSuEnv4 = Release
[[Env 5]]
37_AtTiEnv5 = Attack
38_DeTiEnv5 = Decay
39_ReTiEnv5 = Sustain
40_LeSuEnv5 = Release
[[Env 6]]
41_AtTiEnv6 = Attack
42_DeTiEnv6 = Decay
43_ReTiEnv6 = Sustain
44_LeSuEnv6 = Release
[[Osc 1-8]]
45_Coars1 = Osc 1
46_Coars2 = Osc 2
47_Coars3 = Osc 3
48_Coars4 = Osc 4
49_Coars5 = Osc 5
50_Coars6 = Osc 6
51_Coars7 = Osc 7
52_Coars8 = Osc 8
[[Mixer 1-8]]
54_Lev1Vca = Ch1
55_Lev2Vca = Ch2
56_Lev3Vca = Ch3
57_Lev4Vca = Ch4
58_Lev5Vca = Ch5
59_Lev6Vca = Ch6
60_Lev7Vca = Ch7
61_Lev8Vca = Ch8
[[Mixer 9-16]]
62_Lev9Vca = Ch9
63_Lev10Vca = Ch10
64_Lev11Vca = Ch11
65_Lev12Vca = Ch12
66_Lev13Vca = Ch13
67_Lev14Vca = Ch14
68_Lev15Vca = Ch15
69_Lev16Vca = Ch16
[[Delay]]
74_DelTimeL = Time L
75_DelTimeR = Time R
76_DelFeedL = Feedback L
77_DelFeedR = Feedback R
78_DelCrosL = X Feedback L
79_DelCrosR = X Feedback R
80_DelDry = Dry
81_DelWet = Wet
[[Chorus]]
82_ChoRate = Rate
83_ChoDelay = Delay
84_ChoProf = Amount
85_ChoStRat = Stereo Rate
86_ChoStPro = Stereo Amount
87_ChoDry = Dry
88_ChoWet = Wet
[[Sequencer General]]
113_RateLfoS = Rate
114_SustainS = LFO
115_Glide1S = Glide S1
116_Glide2S = Glide S2
117_Glide3S = Glide S3
118_Glide4S = Glide S4
[[Seq 1]]
89_Seq1Pas1 = 1
90_Seq1Pas2 = 2
91_Seq1Pas3 = 3
92_Seq1Pas4 = 4
93_Seq1Pas5 = 5
94_Seq1Pas6 = 6
95_Seq1Pas7 = 7
96_Seq1Pas8 = 8
[[Seq 2]]
97_Seq2Pas1 = 1
98_Seq2Pas2 = 2
99_Seq2Pas3 = 3
100_Seq2Pas4 = 4
101_Seq2Pas5 = 5
102_Seq2Pas6 = 6
103_Seq2Pas7 = 7
104_Seq2Pas8 = 8
[[Seq 3]]
105_Seq3Pas1 = 1
106_Seq3Pas2 = 2
107_Seq3Pas3 = 3
108_Seq3Pas4 = 4
109_Seq3Pas5 = 5
110_Seq3Pas6 = 6
111_Seq3Pas7 = 7
112_Seq3Pas8 = 8

[ParameterValues]
[ParameterValueTypes]
[Config]
Cache = False
Ignore = False

Last edited by AlexGodbehere on Thu Jun 02, 2016 7:26 am, edited 1 time in total.

jobinho
Posts: 76
Joined: Fri Oct 25, 2013 5:18 pm

Re: Ubermap configs - share your VST/AU device mappings

Post by jobinho » Sun May 15, 2016 10:17 am

Has anyone mapped Largo or NI Razor by any chance?

peterswimm
Posts: 39
Joined: Fri Feb 05, 2016 9:03 pm

Re: Ubermap configs - share your VST/AU device mappings

Post by peterswimm » Tue May 17, 2016 7:31 pm

Plugin name: Dexed
Ubermap config filename: Dexed_1a289c3993e7c7fd9cf286ca65868643.cfg
Notes: Ran into an issue with max parameters limit in Ableton so I left off some keymapping stuff, Amod Sens, etc.
Youll need this config file
https://dl.dropboxusercontent.com/u/183 ... fault.appc
and drop it here:
/Ableton/User Library/Defaults/Plug-In Configurations/VSTs/Dexed
Config:

Code: Select all

[Banks]
[[Global]]
1_Cutoff = CUTOFF
2_Resonance = RESO
3_ALGORITHM = ALGO
4_FEEDBACK = FEEDBACK
123_P MODE SENS. = P MODE SENS.
121_Output = Output
[[LFO]]
122_LFO WAVE = WAVE
5_LFO SPEED = SPEED
6_LFO DELAY = DELAY
7_LFO PM DEPTH = PM DELAY
8_LFO AM DEPTH = AM DELAY
9_LFO KEY SYNC = LFO KEYSYNC
10_OSC KEY SYNC = OSC KEYSYNC
[[MIXER]]
11_OP1 OUTPUT LEVE = OP1 VOL
12_OP2 OUTPUT LEVE = OP2 VOL
13_OP3 OUTPUT LEVE = OP3 VOL
14_OP4 OUTPUT LEVE = OP4 VOL
15_OP5 OUTPUT LEVE = OP5 VOL
16_OP6 OUTPUT LEVE = OP6 VOL
121_Output = Output
[[PITCH EG]]
"17_PITCH EG LEVEL " = "LEVEL 1 "
"18_PITCH EG LEVEL " = " LEVEL 2"
"19_PITCH EG LEVEL " = "LEVEL 3 "
"20_PITCH EG LEVEL " = "LEVEL 4 "
21_PITCH EG RATE 1 = RATE 1
22_PITCH EG RATE 2 = RATE 2
23_PITCH EG RATE 3 = RATE 3
24_PITCH EG RATE 4 = RATE 4
[[OP1 OSC]]
25_OP1 OSC DETUNE = DETUNE
26_OP1 F COARSE = COARSE
27_OP1 F FINE = FINE
28_OP1 MODE = MODE
29_OP1 L SCALE DEP = LSCA DEP
30_OP1 BREAK POINT = BREAKPT
31_OP1 R SCALE DEP = RSCA DEP
32_OP1 RATE SCALIN = RATE SCL
[[OP1 EG]]
33_OP1 EG LEVEL 1 = LEVEL 1
34_OP1 EG LEVEL 2 = LEVEL 2
35_OP1 EG LEVEL 3 = LEVEL 3
36_OP1 EG LEVEL 4 = LEVEL 4
37_OP1 EG RATE 1 = RATE 1
38_OP1 EG RATE 2 = RATE 2
39_OP1 EG RATE 3 = RATE 3
40_OP1 EG RATE 4 = RATE 4
[[OP2 OSC]]
41_OP2 OSC DETUNE = DETUNE
42_OP2 F COARSE = COARSE
43_OP2 F FINE = FINE
44_OP2 MODE = MODE
45_OP2 L SCALE DEP = LSCA DEP
46_OP2 BREAK POINT = BREAKPT
47_OP2 R SCALE DEP = RSCA DEP
48_OP2 RATE SCALIN = RATE SCL
[[OP2 EG]]
49_OP2 EG LEVEL 1 = LEVEL 1
50_OP2 EG LEVEL 2 = LEVEL 2
51_OP2 EG LEVEL 3 = LEVEL 3
52_OP2 EG LEVEL 4 = LEVEL 4
53_OP2 EG RATE 1 = RATE 1
54_OP2 EG RATE 2 = RATE 2
55_OP2 EG RATE 3 = RATE 3
56_OP2 EG RATE 4 = RATE 4
[[OP3 OSC]]
57_OP3 OSC DETUNE = DETUNE
58_OP3 F COARSE = COARSE
59_OP3 F FINE = FINE
64_OP3 MODE = MODE
61_OP3 L SCALE DEP = LSCA DEP
60_OP3 BREAK POINT = BREAKPT
62_OP3 R SCALE DEP = RSCA DEP
63_OP3 RATE SCALIN = RATE SCL
[[OP3 EG]]
73_OP3 EG LEVEL 1 = LEVEL 1
66_OP3 EG LEVEL 2 = LEVEL 2
67_OP3 EG LEVEL 3 = LEVEL 3
68_OP3 EG LEVEL 4 = LEVEL 4
69_OP3 EG RATE 1 = RATE 1
70_OP3 EG RATE 2 = RATE 2
71_OP3 EG RATE 3 = RATE 3
72_OP3 EG RATE 4 = RATE 4
[[OP4 OSC]]
65_OP4 OSC DETUNE = DETUNE
74_OP4 F COARSE = COARSE
75_OP4 F FINE = FINE
76_OP4 MODE = MODE
78_OP4 L SCALE DEP = LSCA DEP
77_OP4 BREAK POINT = BREAKPT
79_OP4 R SCALE DEP = RSCA DEP
80_OP4 RATE SCALIN = RATE SCL
[[OP4 EG]]
81_OP4 EG LEVEL 1 = LEVEL 1
82_OP4 EG LEVEL 2 = LEVEL 2
83_OP4 EG LEVEL 3 = LEVEL 3
84_OP4 EG LEVEL 4 = LEVEL 4
85_OP4 EG RATE 1 = RATE 1
86_OP4 EG RATE 2 = RATE 2
87_OP4 EG RATE 3 = RATE 3
88_OP4 EG RATE 4 = RATE 4
[[OP5 OSC]]
89_OP5 OSC DETUNE = DETUNE
90_OP5 F COARSE = COARSE
91_OP5 F FINE = FINE
92_OP5 MODE = MODE
93_OP5 L SCALE DEP = LSCA DEP
94_OP5 BREAK POINT = BREAKPT
95_OP5 R SCALE DEP = RSCA DEP
96_OP5 RATE SCALIN = RATE SCL
[[OP5 EG]]
97_OP5 EG LEVEL 1 = LEVEL 1
98_OP5 EG LEVEL 2 = LEVEL 2
99_OP5 EG LEVEL 3 = LEVEL 3
100_OP5 EG LEVEL 4 = LEVEL 4
101_OP5 EG RATE 1 = RATE 1
102_OP5 EG RATE 2 = RATE 2
103_OP5 EG RATE 3 = RATE 3
104_OP5 EG RATE 4 = RATE 4
[[OP6 OSC]]
108_OP6 OSC DETUNE = DETUNE
106_OP6 F COARSE = COARSE
114_OP6 F FINE = FINE
107_OP6 MODE = MODE
105_OP6 L SCALE DEP = LSCA DEP
113_OP6 BREAK POINT = BREAKPT
110_OP6 R SCALE DEP = RSCA DEP
111_OP6 RATE SCALIN = RATE SCL
[[OP6 EG]]
112_OP6 EG LEVEL 1 = LEVEL 1
109_OP6 EG LEVEL 2 = LEVEL 2
115_OP6 EG LEVEL 3 = LEVEL 3
116_OP6 EG LEVEL 4 = LEVEL 4
117_OP6 EG RATE 1 = RATE 1
118_OP6 EG RATE 2 = RATE 2
119_OP6 EG RATE 3 = RATE 3
120_OP6 EG RATE 4 = RATE 4
[ParameterValues]
122_LFO WAVE = TRI, SAW ^, SAW v, SQR, SIN, S&H
9_LFO KEY SYNC = OFF, ON
10_OSC KEY SYNC = OFF, ON
28_OP1 MODE = Ratio, Fixed
44_OP2 MODE = Ratio, Fixed
64_OP3 MODE = Ratio, Fixed
76_OP4 MODE = Ratio, Fixed
92_OP5 MODE = Ratio, Fixed
107_OP6 MODE = Ratio, Fixed

peterswimm
Posts: 39
Joined: Fri Feb 05, 2016 9:03 pm

Re: Ubermap configs - share your VST/AU device mappings

Post by peterswimm » Thu May 19, 2016 7:26 pm

Plugin name: Audio Damage's Discord3
Ubermap config filename: Discord3_af17cd461cba7b57b2596b9f14f8bc8f.cfg
Notes: Discord hides the parameters for the Grain Page when in modes p1 and p2, so I put a mode selector on both the shift and grain pages so you are always one click away from making the page your want to make functional.

Config:

Code: Select all

[Banks]
[[Shift]]
39_Mode = Mode
1_LShftAmt = Amt L
25_LShftMod = Mod L
2_LBufSize = Size L
11_RShftAmt = Amt R
32_RShftMod = Mod R
12_RBufSize = Size R
[[Grain]]
39_Mode = Mode
1_LShftAmt = Amt L
11_RShftAmt = Amt R
38_Chaos = Chaos
4_LGranDur = Duration L
5_LGranInt = Interval L
15_RGranInt = Interval R
14_RGranDur = Duration R
[[Left]]
"3_L Delay " = Delay
8_LDlySync = Sync
9_LFltFreq = Frequency
10_LFltWidt = Width
6_LFeedbak = Feedback
7_L XFdbak = X-Feedback
26_L DlyMod = Time Mod
27_LFiltMod = Filter Mod
[[Right]]
"13_R Delay " = Delay
18_RDlySync = Sync
19_RFltFreq = Frequency
20_RFltWidt = Width
16_RFeedbak = Feedback
17_R XFdbak = X-Feedback
33_R DlyMod = Time Mod
34_RFiltMod = Filter Mod
[[LFO]]
21_L LFO Rt = L Time
24_L LFOSnc = L Sync
23_L LFOShp = L Shape
22_L LFO Wv = L Waveform
28_R LFO Rt = R Time
31_R LFOSnc = R Sync
30_R LFOShp = R Shape
29_R LFO Wv = R Waveform
[[Global]]
40_Link L&R = Link L&R
41_MIDIShft = MIDIShft
"35_In Lvl " = "In Lvl "
"36_Out Mix " = "Out Mix "
"37_Out Lvl " = "Out Lvl "
[ParameterValues]
8_LDlySync = .ms, sync
18_RDlySync = .ms, sync
[ParameterValueTypes]
[Config]
Cache = False
Ignore = False

Post Reply