Ableton Push 3 update

Discuss Push with other users.
Post Reply
yah139
Posts: 1
Joined: Fri Jun 05, 2020 7:23 am

Re: Ableton Push 3 update

Post by yah139 » Fri Jun 05, 2020 7:27 am

rolfski wrote:
Wed Jan 29, 2020 10:26 pm
I would die for an "Ableton Push Go": a battery-powered standalone Push that runs a touchscreen-friendly version of Ableton. Not unlike the MPC Live actually.

Speaking of a touchscreen-friendly version of Ableton, where is it anyway? With all the developments in hardware, running Ableton on an iPad or Surface tablet nowadays really shouldn't be a problem and would actually be awesome.
You can already use it on a surface tablet

Acid303
Posts: 214
Joined: Thu Apr 16, 2009 12:07 am

Re: Ableton Push 3 update

Post by Acid303 » Wed Jul 01, 2020 2:17 am

Push 2 should get a chord mode and some probability / randomisation stuff like the Launchpad mk3 pro.

I wouldn't say no if push 3 was a lot more like the Electra One with full Live integration but still with the pads (or as a separate controller on its own).

baranstreet
Posts: 3
Joined: Mon Mar 04, 2019 8:20 am

Re: Ableton Push 3 update

Post by baranstreet » Tue Jul 14, 2020 4:35 am

Imagine a Push with built in Ableton Live that does not require a computer, just like Akai MPC Live. Now that would be amazing...

scheffkoch
Posts: 588
Joined: Thu Jan 08, 2015 12:37 pm

Re: Ableton Push 3 update

Post by scheffkoch » Tue Jul 14, 2020 10:45 am

…you think it‘s awesome not to be able to use vsts when the unit is not connected to a computer?…i don‘t get it where the need for a standalone unit comes from…
macbook pro m1pro, macos monterey, rme multiface via sonnet echo express se I, push 2, faderfox mx12, xone:k2

r25d01
Posts: 5
Joined: Fri Mar 20, 2015 12:29 pm

Re: Ableton Push 3 update

Post by r25d01 » Sun Jul 26, 2020 1:52 pm

baranstreet wrote:
Tue Jul 14, 2020 4:35 am
Imagine a Push with built in Ableton Live that does not require a computer, just like Akai MPC Live. Now that would be amazing...
+1
scheffkoch wrote:
Tue Jul 14, 2020 10:45 am
…you think it‘s awesome not to be able to use vsts when the unit is not connected to a computer?…i don‘t get it where the need for a standalone unit comes from…
I don't rely that much on VSTs. Standalone units are great for live purposes or if you need more mobility.

abozzelli
Posts: 3
Joined: Tue Aug 02, 2016 12:14 pm

Re: Ableton Push 3 update

Post by abozzelli » Tue Jul 28, 2020 8:32 am

They just cut the price... it's 100 euro cheaper everywhere so I guess time has come.

garciiia
Posts: 4
Joined: Wed Jun 12, 2019 2:52 pm

Re: Ableton Push 3 update

Post by garciiia » Tue Jul 28, 2020 10:14 am

abozzelli wrote:
Tue Jul 28, 2020 8:32 am
They just cut the price... it's 100 euro cheaper everywhere so I guess time has come.
i thought the same. i am currently trying to pick a used one but they are still around 400.

elelel
Posts: 1
Joined: Fri Jul 31, 2020 9:25 pm

Re: Ableton Push 3 update

Post by elelel » Fri Jul 31, 2020 9:28 pm

I wanted to buy a push tomorrow. Where did you see a 100 Euro lower price? Not here in Germany!??

abozzelli
Posts: 3
Joined: Tue Aug 02, 2016 12:14 pm

Re: Ableton Push 3 update

Post by abozzelli » Mon Aug 03, 2020 9:12 am

elelel wrote:
Fri Jul 31, 2020 9:28 pm
I wanted to buy a push tomorrow. Where did you see a 100 Euro lower price? Not here in Germany!??
579 on thomann.de

garciiia
Posts: 4
Joined: Wed Jun 12, 2019 2:52 pm

Re: Ableton Push 3 update

Post by garciiia » Fri Aug 07, 2020 10:54 am

elelel wrote:
Fri Jul 31, 2020 9:28 pm
I wanted to buy a push tomorrow. Where did you see a 100 Euro lower price? Not here in Germany!??
New 563 and used around 400-500..

Sean_Clarke
Posts: 139
Joined: Sun Jul 25, 2004 10:20 am
Location: U.K.

Re: Ableton Push 3 update

Post by Sean_Clarke » Sun Sep 20, 2020 3:45 pm

DAWS: Live 11 Suite + PUSH2, Studio One, Bitwig and Reason all via an X32 desk: Instruments: modular and analogue stuff, guitars, basses and drums.

pottering
Posts: 1800
Joined: Sat Dec 06, 2014 4:41 am

Re: Ableton Push 3 update

Post by pottering » Sun Sep 20, 2020 9:24 pm

Ableton should do a linux-like low latency (ideally real-time) distro that boots on any computer (ARM, Intel, AMD, raspberry pi, etc.) instead of a standalone Push box.

I mean, if you are going to do the work to make Live run in a ARM chip (which seems to power the AKAI and NI boxes, then of course the Macs), may as well go all the way, make it boot in as many hardware as possible.

Then people can build their own Ableton boxes.
♥♥♥

antic604
Posts: 48
Joined: Mon Sep 21, 2020 1:32 pm

Re: Ableton Push 3 update

Post by antic604 » Mon Sep 21, 2020 1:33 pm

pottering wrote:
Sun Sep 20, 2020 9:24 pm
I mean, if you are going to do the work to make Live run in a ARM chip (which seems to power the AKAI and NI boxes, then of course the Macs), may as well go all the way, make it boot in as many hardware as possible.
M+ runs on Intel Atom.

jestermgee
Posts: 4500
Joined: Mon Apr 26, 2010 6:38 am

Re: Ableton Push 3 update

Post by jestermgee » Tue Sep 22, 2020 11:42 pm

Sean_Clarke wrote:
Sun Sep 20, 2020 3:45 pm
You may want to wait a minute....

https://ask.audio/articles/sneak-peek-a ... controller
Yeah, that's already been debunked as a photoshop.... and not even a good one.

- Midi ports are misaligned and don't make sense why there are 4
- Outputs unlabelled as Input/Output and missing either expression or foot pedal connections
- SD card "slot" is nothing more than a grey line and is way too big for the size of a SD card, looks more the size of a CF card
- All the labels and logos have been added onto the image and appear "clear" while the image is grainy
- Why on earth would there be a promo image just of the rear of the unit. You would want to show off the actual user interface part of the thing for a starter.

If it was something actually leaked from Ableton then I would not be interested just based off how bad that knock-up is.

Seems it's just hype to generate traffic to a site based on the back of NIs current Maschine+ release or to undermine it and throw off some potential NI sales.

I am sure a P3 will bring some new and interesting features some time in the future, probably a touch screen and maybe even wifi enabled to cut the chord. A programmable touch strip to be used for the xfader, maybe even a crappy audio interface and of course more streamlined usage that will probably tie in perfectly with Live 11. All speculation but seems more realistic than a standalone product considering there are just a lot of people that have no need for a limited groove box especially given the options already available.

J-Fly
Posts: 46
Joined: Wed Oct 24, 2018 3:40 pm

Re: Ableton Push 3 update

Post by J-Fly » Thu Sep 24, 2020 6:58 pm

So many people against standalone :cry: :cry: :cry:

Post Reply