Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Since Ableton's support team have completely failed me so far, can someone else please help me out here!
I'm fed up to my limit with Ableton support at the moment. I initially began this support request on the 11th of January and have had delayed and lackluster replies since then, with still no solution. I've had to email them multiple times to get a reply as they seem to just ignore my situation otherwise. Even then, the majority of what they have sent back has been copy and pasted from Ableton's generic support page which I told them I had checked in the first place.
Here is my issue:
My Push 2 will not load past the logo screen with any Live version after 10.1.9 (including 11), ONLY on my computer. It works fine on my laptop with the same Windows and Live versions, with the same preferences and everything. It works fine in Live 10.1.x and earlier on my PC. I have tried every solution on https://help.ableton.com/hc/en-us/artic ... 20connect. to no avail.
I have also tried creating a new admin user on the PC and that didn't work either. I've uninstalled and reinstalled Live multiple times, the Push is showing up in Device Manager fine, all USB ports tried & power saving disabled, also tried a new cable and with/without power adapter. I reset Firewall/Defender to default settings too just in case. I have all the latest drivers, updates etc. The PC has an Nvidia 1080Ti, i7-7700k and 32GB ram so plenty enough power.
I just installed and attempted to get the Push to work with 11.0, and still nothing. When I tap the pads, I get the yellow MIDI In indicator flash, but that's it. The preferences are set up exactly as instructed, with only Push 2 and the correct slots selected as control surfaces. I checked the Log.txt file and found these lines which might help point to a solution:
[*]2021-02-23T12:27:59.288229: info: Python: INFO:Push2.push2:287 - Push 2 script loaded
2021-02-23T12:27:59.293207: info: Python: ERROR:ableton.v2.control_surface.control_surface:292 - Error while loading control surface preferences Ran out of input
2021-02-23T12:27:59.309266: info: Python: INFO:Push2.push2:308 - Push 2 script unloaded
2021-02-23T12:27:59.309308: info: Default App: Begin SavePrefs
2021-02-23T12:27:59.309850: info: MemoryUsage: V: 5.8 GB, R: 705.2 MB, P: 717.5 MB
2021-02-23T12:27:59.313515: info: Default App: End SavePrefs
2021-02-23T12:28:00.718841: info: Python: INFO:Push2.push2:718 - Push 2 script loaded
2021-02-23T12:28:00.741343: info: AMidiIO: Midi Remote Scripts:
MidiRemoteScript 1 [Control Surface="Push2" Input="Ableton Push 2" Output="Ableton Push 2"]
MidiRemoteScript 2 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 3 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 4 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 5 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 6 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 7 [Control Surface="None" Input="None" Output="None"]
2021-02-23T12:28:00.741359: info: AMidiIO: Takeover Mode: None
It seems like the script loads, encounters an error, unloads, and then loads again. If anyone could help me out here that would be amazing. I really don't want to have wasted my money on an unusable Live 11. Thank you in advance.
Here is my issue:
My Push 2 will not load past the logo screen with any Live version after 10.1.9 (including 11), ONLY on my computer. It works fine on my laptop with the same Windows and Live versions, with the same preferences and everything. It works fine in Live 10.1.x and earlier on my PC. I have tried every solution on https://help.ableton.com/hc/en-us/artic ... 20connect. to no avail.
I have also tried creating a new admin user on the PC and that didn't work either. I've uninstalled and reinstalled Live multiple times, the Push is showing up in Device Manager fine, all USB ports tried & power saving disabled, also tried a new cable and with/without power adapter. I reset Firewall/Defender to default settings too just in case. I have all the latest drivers, updates etc. The PC has an Nvidia 1080Ti, i7-7700k and 32GB ram so plenty enough power.
I just installed and attempted to get the Push to work with 11.0, and still nothing. When I tap the pads, I get the yellow MIDI In indicator flash, but that's it. The preferences are set up exactly as instructed, with only Push 2 and the correct slots selected as control surfaces. I checked the Log.txt file and found these lines which might help point to a solution:
[*]2021-02-23T12:27:59.288229: info: Python: INFO:Push2.push2:287 - Push 2 script loaded
2021-02-23T12:27:59.293207: info: Python: ERROR:ableton.v2.control_surface.control_surface:292 - Error while loading control surface preferences Ran out of input
2021-02-23T12:27:59.309266: info: Python: INFO:Push2.push2:308 - Push 2 script unloaded
2021-02-23T12:27:59.309308: info: Default App: Begin SavePrefs
2021-02-23T12:27:59.309850: info: MemoryUsage: V: 5.8 GB, R: 705.2 MB, P: 717.5 MB
2021-02-23T12:27:59.313515: info: Default App: End SavePrefs
2021-02-23T12:28:00.718841: info: Python: INFO:Push2.push2:718 - Push 2 script loaded
2021-02-23T12:28:00.741343: info: AMidiIO: Midi Remote Scripts:
MidiRemoteScript 1 [Control Surface="Push2" Input="Ableton Push 2" Output="Ableton Push 2"]
MidiRemoteScript 2 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 3 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 4 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 5 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 6 [Control Surface="None" Input="None" Output="None"]
MidiRemoteScript 7 [Control Surface="None" Input="None" Output="None"]
2021-02-23T12:28:00.741359: info: AMidiIO: Takeover Mode: None
It seems like the script loads, encounters an error, unloads, and then loads again. If anyone could help me out here that would be amazing. I really don't want to have wasted my money on an unusable Live 11. Thank you in advance.
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Does your Push still behave the same way when you put it in USER mode?
-
- Posts: 898
- Joined: Sun Aug 10, 2014 2:43 pm
- Location: Kent
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Check to see if you have more than 1 Push device listed within Ableton and Windows device manager, if you have then remove them all, and restart windows.
Live 11, M1 Mac Mini, Push 2, Scarlett 18i20 & ADA8200, Softube Console 1 Mk2, Deepmind12, Hydrasynth, Cobalt 8M, Moog Subsequent 25, IK Uno Synth Pro, Plethora X3, Nord Drum 3P
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Hi, there were 2 Push 2 Displays listed, so I removed both of them, restarted and it still did not work.Mark Williams wrote: ↑Tue Feb 23, 2021 7:08 pmCheck to see if you have more than 1 Push device listed within Ableton and Windows device manager, if you have then remove them all, and restart windows.
I found a file called Push2DisplayProcess.log which had this information on it:
pid=22516
parent_pid=10960
commit_id=9dc150af94686f816d2cf27815fcf2907d4b86f8
2021-02-23T20:27:23.443538=info { "message": "Push2DisplayProcess 11.0 - started" }
2021-02-23T20:27:23.443619=info { "message": "applicationDirPath: C:/ProgramData/Ableton/Live 11 Standard/Program/Push2DisplayProcess.exe" }
2021-02-23T20:27:23.443867=info { "message": "Adding Qt plugins path: C:/ProgramData/Ableton/Live 11 Standard/Program/Qt/plugins" }
2021-02-23T20:27:24.062395=warning { "message": "Could not find font file " }
2021-02-23T20:27:24.062522=warning { "message": "Could not find font file " }
2021-02-23T20:27:24.062640=warning { "message": "Could not find font file " }
2021-02-23T20:27:44.630834=info { "message": "Push2DisplayProcess - terminated with 0" }
-
- Posts: 898
- Joined: Sun Aug 10, 2014 2:43 pm
- Location: Kent
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Make sure only one instance of Push 2 is selected in theAbleton Control Surface menu. If there are any extra Push 2 control surfaces, set all drop-downs to "None" for the extra instances.
Make sure that the Push 2 Control Surface Input and Output are set to Ableton Push 2 (Live port) and NOT Ableton Push 2 (User Port).
Only 1 instance of Push should show.
Make sure that Ableton Push 2 appears under both Sound, Video and Game Controllers and Push 2 Display appears under Universal Serial Bus devices.
Also check USB power management settings making sure USB isnt being turned off.
Make sure that the Push 2 Control Surface Input and Output are set to Ableton Push 2 (Live port) and NOT Ableton Push 2 (User Port).
Only 1 instance of Push should show.
Make sure that Ableton Push 2 appears under both Sound, Video and Game Controllers and Push 2 Display appears under Universal Serial Bus devices.
Also check USB power management settings making sure USB isnt being turned off.
Live 11, M1 Mac Mini, Push 2, Scarlett 18i20 & ADA8200, Softube Console 1 Mk2, Deepmind12, Hydrasynth, Cobalt 8M, Moog Subsequent 25, IK Uno Synth Pro, Plethora X3, Nord Drum 3P
-
- Posts: 4500
- Joined: Mon Apr 26, 2010 6:38 am
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Also, make sure when you launch Live in Task manager, check if you have the process "Push2DisplayProcess.exe" running. It may be listed under the actual Ableton Live process
I occasionally have an issue with Live 10 that if I start Live and Push is powered ON already it does not connect. Never solved it, happens occasionally but is always fixed by power cycling Push while Live is running
I occasionally have an issue with Live 10 that if I start Live and Push is powered ON already it does not connect. Never solved it, happens occasionally but is always fixed by power cycling Push while Live is running
-
- Posts: 898
- Joined: Sun Aug 10, 2014 2:43 pm
- Location: Kent
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Glad Im not only one there Jester Time will tell if Live 11 and Push2 do same.
Live 11, M1 Mac Mini, Push 2, Scarlett 18i20 & ADA8200, Softube Console 1 Mk2, Deepmind12, Hydrasynth, Cobalt 8M, Moog Subsequent 25, IK Uno Synth Pro, Plethora X3, Nord Drum 3P
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Ahh I really thought this would be the fix. I had always thought it should just appear in USB devices, but I noticed there were about 7 instances of the Push 2 under Sound, Video and Game Controllers (all inactive except one) So I uninstalled all of them and the instance in USB devices, turned the push back on, the device reinstalled, and it still doesn't work. USB power management is turned off also.Make sure that Ableton Push 2 appears under both Sound, Video and Game Controllers and Push 2 Display appears under Universal Serial Bus devices.
I only have the options to pick "Ableton Push 2" and "Ableton Push 2 (Port 2)" in the control surface settings. I use the former as I assume that is the Live port. Trying the other one doesn't work either.Make sure that the Push 2 Control Surface Input and Output are set to Ableton Push 2 (Live port) and NOT Ableton Push 2 (User Port).
I just checked and it is running.Also, make sure when you launch Live in Task manager, check if you have the process "Push2DisplayProcess.exe" running.
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
I am having the same issue but mine doesn't even seem to be getting as far as yours! how did you access the log/script files please? i'll write a new post but similar issue and I know my push is not broken.
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Using Ableton 10 I often had to turn on the Push twice to get it to work. The pads wouldn't light up.
It almost always worked on the second powerup, and would work fine until the PC gets turned off.
On Ableton 11 however, I've found that very often it won't move past the Push logo on the screen of the Push. I think just one led comes up near the touch strip, but it doesn't move past that and it will only work after restarting the whole PC, which is irritating.
It almost always worked on the second powerup, and would work fine until the PC gets turned off.
On Ableton 11 however, I've found that very often it won't move past the Push logo on the screen of the Push. I think just one led comes up near the touch strip, but it doesn't move past that and it will only work after restarting the whole PC, which is irritating.
-
- Posts: 4500
- Joined: Mon Apr 26, 2010 6:38 am
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Yeah sounds similar to my usage in Live 10 tho it behaves the same in L11 for me still... Push does not always connect even when powered on and detected by both my PC and Live in preferences, Push remains completely blank until I power cycle it and bam, it's fine after this. I just accept this is how it behaves sometimes now since I sometimes have a similar issue with my MCU where the LCD is completely corrupt garbage but the faders and buttons all work fine, power cycle MCU while Live is running cleans it all up. I'm just not bothered enough to raise as a ticket unless it stops working completely.blof_eld wrote: ↑Mon Mar 15, 2021 4:31 amUsing Ableton 10 I often had to turn on the Push twice to get it to work. The pads wouldn't light up.
It almost always worked on the second powerup, and would work fine until the PC gets turned off.
On Ableton 11 however, I've found that very often it won't move past the Push logo on the screen of the Push. I think just one led comes up near the touch strip, but it doesn't move past that and it will only work after restarting the whole PC, which is irritating.
-
- Posts: 2
- Joined: Tue Mar 23, 2021 4:04 am
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Hey there. I went through an entire, arduous process with Ableton support to get this resolved at a time where i had 10.8
after exhausting many many options, they suggested i roll back to 10.7 and that worked! i had to go into ableton's properties and turn on read-only mode and make sure that auto-update was off, so it didnt go to 10.8 but i had a solution!
fast forward about a year and i totally forgot about the issue downloading ableton 11 and have the same problem. but NOW i have nothing to roll back to. so, the moral of the story is that you can MAYBE get it to work with 10.7 if you want.
i noticed that you and i had MANY of the same exact error codes and issues, including the .log file's contents.
best of luck. please let me know if you find any solutions. this is really a joke. i cannot use this midi controller.
after exhausting many many options, they suggested i roll back to 10.7 and that worked! i had to go into ableton's properties and turn on read-only mode and make sure that auto-update was off, so it didnt go to 10.8 but i had a solution!
fast forward about a year and i totally forgot about the issue downloading ableton 11 and have the same problem. but NOW i have nothing to roll back to. so, the moral of the story is that you can MAYBE get it to work with 10.7 if you want.
i noticed that you and i had MANY of the same exact error codes and issues, including the .log file's contents.
best of luck. please let me know if you find any solutions. this is really a joke. i cannot use this midi controller.
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
I never had problems with my Push2; not in Live 9 suite, 10 suite, using it with PusheR2 software in Reason 11 suite and using Shove software in Fruity Loops.....
I guess you use an Apple Computer, on my Win 10 PC, no problems!
I guess you use an Apple Computer, on my Win 10 PC, no problems!
Greetings from Miyaru.
Prodaw i7-7700, 16Gb Ram, Focusrite Scarlett 18i20 3rd gen, ESI M4U eX, Reason 12, Live Suit 10, Push2, Presonus Eris E8 and Monitor Station V2, Lexicon MPX1,
Korg N1, Yamaha RM1x
Prodaw i7-7700, 16Gb Ram, Focusrite Scarlett 18i20 3rd gen, ESI M4U eX, Reason 12, Live Suit 10, Push2, Presonus Eris E8 and Monitor Station V2, Lexicon MPX1,
Korg N1, Yamaha RM1x
-
- Posts: 898
- Joined: Sun Aug 10, 2014 2:43 pm
- Location: Kent
Re: Since Ableton's support team have completely failed me so far, can someone else please help me out here!
Same here, no issues in Live 10 or Live 11 with Push 2 on Win 10 PC.
Live 11, M1 Mac Mini, Push 2, Scarlett 18i20 & ADA8200, Softube Console 1 Mk2, Deepmind12, Hydrasynth, Cobalt 8M, Moog Subsequent 25, IK Uno Synth Pro, Plethora X3, Nord Drum 3P