828mk3: What a waste of half an hour
Posted: Thu Jun 30, 2011 10:00 pm
I hope L9 does finally support CoreAudio I/O names. How difficult can it be? I just spent the last 1/2 hour trying to track down the right I/O again from the cryptic list of 24 and I still can't work out where it's gone even though I RTFM...
I've now turned off all the ADAT digital outs, and Main Out and Phones are set to mirror Analog Outputs 1/2.
I've also turned off all the ADAT ins.
This means the driver should now only have:
In 1/2 = Mic/Instrument In 1/2
In 3/4 = Analog TRS In 1/2
In 5/6 = Analog TRS In 3/4
In 7/8 = Analog TRS In 5/6
In 9/10 = Analog TRS In 7/8
In 11/12 = Reverb Returns
In 13/14 = Return Assign (for bouncing mixes via the 828mk3)
In 15/16 = SPDIF In L/R
Out 1/2 = Analog Outs 1/2 + Main Outs + Phones 1/2
Out 3/4 = Analog Outs 3/4
Out 5/6 = Analog Outs 5/6
Out 7/8 = Analog Outs 7/8
Out 9/10 = SPDIF Outs L/R
I still seem to have 14 outs though! The MOTU manual says SPDIF should normally be 14, but if Mains and Phones are set to mirror they disappear and the list should shrink by two for each. Huh? I should only have 10 outs now! FFS.
On I brighter note I should be getting my APC tomorrow!
I've now turned off all the ADAT digital outs, and Main Out and Phones are set to mirror Analog Outputs 1/2.
I've also turned off all the ADAT ins.
This means the driver should now only have:
In 1/2 = Mic/Instrument In 1/2
In 3/4 = Analog TRS In 1/2
In 5/6 = Analog TRS In 3/4
In 7/8 = Analog TRS In 5/6
In 9/10 = Analog TRS In 7/8
In 11/12 = Reverb Returns
In 13/14 = Return Assign (for bouncing mixes via the 828mk3)
In 15/16 = SPDIF In L/R
Out 1/2 = Analog Outs 1/2 + Main Outs + Phones 1/2
Out 3/4 = Analog Outs 3/4
Out 5/6 = Analog Outs 5/6
Out 7/8 = Analog Outs 7/8
Out 9/10 = SPDIF Outs L/R
I still seem to have 14 outs though! The MOTU manual says SPDIF should normally be 14, but if Mains and Phones are set to mirror they disappear and the list should shrink by two for each. Huh? I should only have 10 outs now! FFS.
On I brighter note I should be getting my APC tomorrow!