tips for converting vinyl collection to ditigal
tips for converting vinyl collection to ditigal
I'm ready to start converting my vinyl and I was wondering if anyone has some tips for good results.
my gear:
ECLER SMAC PRO 30 using the balanced outs
Audiophile 192
Numark T 200's
I know the 200's have some serious wobble, is there any way to minimize this with some kind of maintenance?
I was planning on recording everything in 24 bit then converting to 320kbps mp3. Is this a bad idea for any reason, for instance if i convert any of the tracks back to .wav to play in club cd decks?
my gear:
ECLER SMAC PRO 30 using the balanced outs
Audiophile 192
Numark T 200's
I know the 200's have some serious wobble, is there any way to minimize this with some kind of maintenance?
I was planning on recording everything in 24 bit then converting to 320kbps mp3. Is this a bad idea for any reason, for instance if i convert any of the tracks back to .wav to play in club cd decks?
-
- Posts: 1196
- Joined: Wed Jul 10, 2002 1:28 am
My experience says definitely record at the higher bit and sample rate, especially for vinyl. You'll lose fidelity when you convert to mp3, but the original files will sound much, much better.
Also, make sure you get that meter as close to the red as you can without going over to ensure that you make use of all 24bits.
k
Also, make sure you get that meter as close to the red as you can without going over to ensure that you make use of all 24bits.
k
-
- Posts: 6
- Joined: Fri Jan 15, 2010 1:50 am
Re: tips for converting vinyl collection to ditigal
Hey all digging up this old post because the subject matches my question.
What's the best method to record multiple records in one session?
Currently I record in Session view adding each song to a new clip. The only problem with this is where the audio is being saved and how Ableton names the files. These recordings are eventually going to be added to my tracks folder for DJ sets. I'm having a hard time finding the shortest line from recording to having the file named properly and in the right folder.
Right now the two options I see are, transferring each clip or song to arrange view and exporting from there one by one.
Or renaming the files way down in the > samples > recorded folder, then moving the files to my Tracks folder, and hotswapping the missing files once I re-open the project.
Thanks in advance!
What's the best method to record multiple records in one session?
Currently I record in Session view adding each song to a new clip. The only problem with this is where the audio is being saved and how Ableton names the files. These recordings are eventually going to be added to my tracks folder for DJ sets. I'm having a hard time finding the shortest line from recording to having the file named properly and in the right folder.
Right now the two options I see are, transferring each clip or song to arrange view and exporting from there one by one.
Or renaming the files way down in the > samples > recorded folder, then moving the files to my Tracks folder, and hotswapping the missing files once I re-open the project.
Thanks in advance!
-
- Posts: 362
- Joined: Sat Feb 04, 2006 4:59 pm
- Location: New (where the weak are killed and eaten) Jersey
- Contact:
Re: tips for converting vinyl collection to ditigal
IMO rip vinyl's to FLAC format instead of MP3
for some reason FLAC just sounds a little better.
for some reason FLAC just sounds a little better.
Re: tips for converting vinyl collection to ditigal
well for starters mp3 is a compressed & lossy format, whereas FLAC compresses but without any loss of quality.BassTooth wrote:IMO rip vinyl's to FLAC format instead of MP3
for some reason FLAC just sounds a little better.
flac is pretty much wav quality, with 50-60% less size. flac playback is a little more cpu intensive than wav though.
Re: tips for converting vinyl collection to ditigal
I'd not go to all the trouble to record to disk your vinyl, and then save the master as MP3, that would be such a waste.
Not to enter an mp3 quality debate, but even 320kps doesn't sound quite as good on a big club system or HIFI as the original vinyl or a ripped WAV. I buy all my dj tunes as WAV downloads, just to make sure i get as good a quality as i can.
Sure rip another copy as MP3, but keep a dvd master of all your LP rips as either WAV or FLAC at the very least in CD quality bitrate.
with storage becoming so cheap and capacities increasing, and internet bandwidth increasing, I also see WAV and other lossless formats becoming more popular again too.
Not to enter an mp3 quality debate, but even 320kps doesn't sound quite as good on a big club system or HIFI as the original vinyl or a ripped WAV. I buy all my dj tunes as WAV downloads, just to make sure i get as good a quality as i can.
Sure rip another copy as MP3, but keep a dvd master of all your LP rips as either WAV or FLAC at the very least in CD quality bitrate.
with storage becoming so cheap and capacities increasing, and internet bandwidth increasing, I also see WAV and other lossless formats becoming more popular again too.
-
- Posts: 6
- Joined: Fri Jan 15, 2010 1:50 am
Re: tips for converting vinyl collection to ditigal
My question is about file management.
Lets say I come home from the vinyl store with a bunch of great finds. I want to record 10-15 tracks in one session (I'm recording Wavs). Once these tracks are recorded I've got to re-name each one and sort into the proper folder. I'm trying to find the best system of re-naming and sorting the wavs.
Lets say I come home from the vinyl store with a bunch of great finds. I want to record 10-15 tracks in one session (I'm recording Wavs). Once these tracks are recorded I've got to re-name each one and sort into the proper folder. I'm trying to find the best system of re-naming and sorting the wavs.
Re: tips for converting vinyl collection to ditigal
Use Audacity to record, split, normalize, and then name and save each track.TheFunkyBunch wrote:My question is about file management.
And while you're at it, key&bpm them all either by ear, or use Mixed in Key.