The Bottom Line on Stuttering
The Bottom Line on Stuttering
Alright folks, we're gonna figure this out once and for all.
Ableton has said that they've had complaints about stuttering and audio dropouts. They've pointed to a possible problem with USB breakout boxes, like the M-Audio Quattro (which I use).
We've gone round and round talking about CPU power, RAM, disk drives...and I've done everything I can. But still I get the ocassional sputter or heinous skipping. So...is this the fault of USB? I know my laptop is pretty unimpresive:
PIII 500 mhz
256 RAM
12 GB harddrive
USB 1.0
but as long as I keep the reverb off, I'm fine with my CPU drain. At some point, however, I will go to a new scene, perhaps one with longer loops than the rest, and it's sputter-central.
I've defragmented, optimized, and blessed everything in the laptop. Is this a USB shortcoming? What's the scoop people?
Solovox
http://www.ampcast.com/solovox
Ableton has said that they've had complaints about stuttering and audio dropouts. They've pointed to a possible problem with USB breakout boxes, like the M-Audio Quattro (which I use).
We've gone round and round talking about CPU power, RAM, disk drives...and I've done everything I can. But still I get the ocassional sputter or heinous skipping. So...is this the fault of USB? I know my laptop is pretty unimpresive:
PIII 500 mhz
256 RAM
12 GB harddrive
USB 1.0
but as long as I keep the reverb off, I'm fine with my CPU drain. At some point, however, I will go to a new scene, perhaps one with longer loops than the rest, and it's sputter-central.
I've defragmented, optimized, and blessed everything in the laptop. Is this a USB shortcoming? What's the scoop people?
Solovox
http://www.ampcast.com/solovox
I'm pretty sure this problem is related to the inadequacies of the USB protocol for digital audio. Throughput in general is pretty weak as opposed to PCMCIA and Firewire, and I've heard many people complain about their USB boxes (eg. Emagic Emi) particularly with PC laptops. Still, I've seen many enthusastic reports about the device you are using, so it could indeed be a config prob - maybe try the device on a friend's laptop to check if he's got the same problems?
have you installed the latest beta driver for the quattro?
http://www.midiman.net/support/drivers/ ... c5Beta.EXE
http://www.midiman.net/support/drivers/ ... c5Beta.EXE
It's the USB...
Hi
I've had the stuttering too, on a 450 mHz Windows 98 machine - anytime the CPU got up to even 45% it was likely. It just felt CPU-related to me so I never tried running anything other than my EMI 2|6, but I finally checked it out with the internal sound and viola - not stuttering, even up to 80-90% on the CPU.
So... I'm sure it's a USB thing (it's amazing they squeeze as much through that little bandwidth as they do - I knew it was just too good to be true
For now I live with a little more signal-to-noise. I'd put my EMI up on Ebay except I still use it for recording audio in.
Brian
P.S. BTW it was interesting to note from the performance test results that Windows 2000 or XP don't seem to buy you any better performance on similar machines...
I've had the stuttering too, on a 450 mHz Windows 98 machine - anytime the CPU got up to even 45% it was likely. It just felt CPU-related to me so I never tried running anything other than my EMI 2|6, but I finally checked it out with the internal sound and viola - not stuttering, even up to 80-90% on the CPU.
So... I'm sure it's a USB thing (it's amazing they squeeze as much through that little bandwidth as they do - I knew it was just too good to be true
For now I live with a little more signal-to-noise. I'd put my EMI up on Ebay except I still use it for recording audio in.
Brian
P.S. BTW it was interesting to note from the performance test results that Windows 2000 or XP don't seem to buy you any better performance on similar machines...
Re: The Bottom Line on Stuttering
FWIW, I've had nightmare problems with USB audio. I used an Egosys Waveterminal U2A (USB 1.0) audio interface for a long time, and with 3 different Macs I've owned. It brought all of them to their knees. Then I tried my buddy's MOTU 828 (btw this was all in OS9) while I was mixing one of my project's in DP3 and not only was the CPU load halved (!) but all stuttering was gone. I never used it with Live though. From my own experiences and the many stories on the web I've seen, I think USB 1.0 audio is bad news.
-
- Posts: 17
- Joined: Wed Jan 29, 2003 3:15 pm
- Location: Toronto, Canada
- Contact:
New beta driver for OS X for USB Quattro
http://www.m-audio.net/support/driversearch.php
New beta driver for OS X for USB Quattro
This is over a month old, but it was news to me, so I thought I'd post it. Anyone notice performance improvements with it?
New beta driver for OS X for USB Quattro
This is over a month old, but it was news to me, so I thought I'd post it. Anyone notice performance improvements with it?
-
- Posts: 989
- Joined: Sat Jul 13, 2002 5:48 am
- Location: Philadelphia, PA, USA
- Contact:
Well-written drivers definitely make a night-and-day difference.Alex Reynolds wrote:my Event EZBus (which uses a built-in CoreAudio driver) has been purring quietly over USB.
Sorry for straying a bit off topic, but I'm impressed you're not having any problems with the EZBus because my Waveterminal U2A had a built-in Coreaudio driver (just plug and play in OSX) that still had noises and stuttering.
I'm also curious if you've managed to use it to control Live as a control surface, since to my knowledge this still isn't possible because there isn't an OSX editor even though there's been a PC one for a long time. Thanks
-
- Posts: 989
- Joined: Sat Jul 13, 2002 5:48 am
- Location: Philadelphia, PA, USA
- Contact:
-
- Posts: 318
- Joined: Thu Jan 09, 2003 7:26 pm
- Location: boise, idaho
I dunno... I think everyone who says USB for audio isn't the #1 best solution is right... and yet, I've got nothing but joy using my Tascam US-428...
That said, I don't push it that hard (how can you with only two outs?), and for composing, it's great... the 4 inputs are enough for tracking vocals, a couple of mics on guitars, etc...
It's no mean-machine, but gets the job done, and I don't experience stutters, or dropouts, etc... I get those more from CPU overload than the audio interface....
just another perspective...
tlc
That said, I don't push it that hard (how can you with only two outs?), and for composing, it's great... the 4 inputs are enough for tracking vocals, a couple of mics on guitars, etc...
It's no mean-machine, but gets the job done, and I don't experience stutters, or dropouts, etc... I get those more from CPU overload than the audio interface....
just another perspective...
tlc
It's always great to hear positive reports about gear; I wish gear always worked as advertised. The main disadvantage in my experience with USB audio (and this is how I view pushing it hard) is how it performs at low buffer settings. At higher settings things are fine, but when you want to get low latency and bump things down to the neighborhood of 128 buffers, that's when performance starts deteriorating drastically, while firewire interfaces like the MOTU 828 (on Mac OS9, anyway) remain rock solid. This makes me curious: what buffer settings are you using and are you a Mac or PC user? How have your experiences with driver updates been? The last time I checked the Tascam forum, users were impatiently awaiting a decent Mac OSX driver, is that still the case?tribalogical wrote:That said, I don't push it that hard (how can you with only two outs?)
-
- Posts: 989
- Joined: Sat Jul 13, 2002 5:48 am
- Location: Philadelphia, PA, USA
- Contact: