which of these 3 monitor stands + mopads?
which of these 3 monitor stands + mopads?
Would love to spend next to nothing, and you can keep buying more expensive.
spend a $100 on these cheap On-Stage adjustable?
http://www.sweetwater.com/store/detail/MonitorStd/
$150 on these lightweight Argosy 42"?
http://www.sweetwater.com/store/detail/SS42/
or $180 on these sand-filled Raxxess 42"?
http://www.sweetwater.com/store/detail/ERSS42/
and should I spend $40 on Mopads?
http://www.sweetwater.com/store/detail/MoPAD
It would make sense, of course to get the sand filled ones but then, with the Mopads, I am spending $220 when I really didn't want to spend even $100. I have a lousy room for mixing and no room conditioning yet. But for the last 6 months I've had my Event 20/20bas stacked ontop of each other on the floor vaguely pointing toward me.
It's time to upgrade. It's always better to spend more now, than having to buy again sooner/later to upgrade to pro quality, I know, but DAMN this shit costs money.
spend a $100 on these cheap On-Stage adjustable?
http://www.sweetwater.com/store/detail/MonitorStd/
$150 on these lightweight Argosy 42"?
http://www.sweetwater.com/store/detail/SS42/
or $180 on these sand-filled Raxxess 42"?
http://www.sweetwater.com/store/detail/ERSS42/
and should I spend $40 on Mopads?
http://www.sweetwater.com/store/detail/MoPAD
It would make sense, of course to get the sand filled ones but then, with the Mopads, I am spending $220 when I really didn't want to spend even $100. I have a lousy room for mixing and no room conditioning yet. But for the last 6 months I've had my Event 20/20bas stacked ontop of each other on the floor vaguely pointing toward me.
It's time to upgrade. It's always better to spend more now, than having to buy again sooner/later to upgrade to pro quality, I know, but DAMN this shit costs money.
Re: which of these 3 monitor stands + mopads?
I have the first one you mentioned (100.00) and the Mopads, no complaints so far.
Re: which of these 3 monitor stands + mopads?
These Ultimate Supports look pretty cool ($250)
http://www.sweetwater.com/store/detail/MS90USS/
do you think the "included acoustic foam pads" would do the same deed as a Mopad?
http://www.sweetwater.com/store/detail/MS90USS/
do you think the "included acoustic foam pads" would do the same deed as a Mopad?
Re: which of these 3 monitor stands + mopads?
40 for some foam blocks?
could you please transfer 20 for this mail? it still safes 20...
could you please transfer 20 for this mail? it still safes 20...
Last edited by 3phase on Wed Feb 02, 2011 5:50 am, edited 1 time in total.
mac book 2,16 ghz 4(3)gb ram, Os 10.62, fireface 400,
Re: which of these 3 monitor stands + mopads?
You can get the On-stage ones for $50(pr)... Lookout for a deal if you can.
-
- Posts: 2247
- Joined: Fri Jan 10, 2003 5:28 pm
- Location: Tokyo
Re: which of these 3 monitor stands + mopads?
A friend made some badass custom stands, sandfilled, for pocket money. Why not do that? Makes a great project and much more satisfying too.
Re: which of these 3 monitor stands + mopads?
4" pvc and toilet flanges FTW!muthafunka wrote:A friend made some badass custom stands, sandfilled, for pocket money. Why not do that? Makes a great project and much more satisfying too.
Re: which of these 3 monitor stands + mopads?
Number 2 or 3 and a pair of Recoils fitting to your speakers. Wobbly stands are shit and cheap foam does no decoupling...
And consequently buy a pair of vovox cables to connect your monitors (i have also Event 20/20's, the cables are my best investment in equipment for years).
And consequently buy a pair of vovox cables to connect your monitors (i have also Event 20/20's, the cables are my best investment in equipment for years).
Re: which of these 3 monitor stands + mopads?
esky wrote:Number 2 or 3 and a pair of Recoils fitting to your speakers. Wobbly stands are shit and cheap foam does no decoupling...
And consequently buy a pair of vovox cables to connect your monitors (i have also Event 20/20's, the cables are my best investment in equipment for years).
you guys are really funny..
allready developed ableton ears?
mac book 2,16 ghz 4(3)gb ram, Os 10.62, fireface 400,
Re: which of these 3 monitor stands + mopads?
Thank you for your objective contribution to this theme, you are as usual a great help...
Re: which of these 3 monitor stands + mopads?
3phase wrote:esky wrote:Number 2 or 3 and a pair of Recoils fitting to your speakers. Wobbly stands are shit and cheap foam does no decoupling...
And consequently buy a pair of vovox cables to connect your monitors (i have also Event 20/20's, the cables are my best investment in equipment for years).
you guys are really funny..
allready developed ableton ears?
Re: which of these 3 monitor stands + mopads?
I just bought the Raxess stands for my Event ASP8's. If the 20/20's are as huge as these 8's are you will want to get the shorter 36 inch stands because you want the tweeters at your ear height.
DIY is the def the budget way to go - plenty of plans on the net. Having no tools or skills I went with the Raxess. Got mine from Sweetwater. One of the stands was crooked and missing 4 holes. They sent me another pair and a FedEx slip for the fubared set at no cost. I heart Sweetwater.
The "instructions" say to "obtain a 4 mil poly bag" for the sand. Good luck finding 4 x 34 inch poly bags anywhere! The guys at Raxess didn't even know where to get them. I thought about filling freezer bags and stuffing them in, but the idea is completely fill the space, so I just put some silicone caulk around the outside of the column/base join to (I hope) avoid leakage.
As for the sand - forget Ace or Lowes - go to a concrete supply place and get pure silica sandblasting sand. The playground sand at the hardware store is moist and has dirt in it. The silica sand came in a 100 lb (!!) bag for $12. It took half a bag to fill the stands.
I also got the Mopads. Yeah they're just cut foam slabs but they do help the sound and they can angle the speakers if you need to. They are overpriced but way cheaper than the other speaker decoupler things somebody suggested (which themselves are just foam slabs with a steel plate in them).
S0 don't stress about the Mopads, you can always add them later. Just get those Events off the floor, man!
DIY is the def the budget way to go - plenty of plans on the net. Having no tools or skills I went with the Raxess. Got mine from Sweetwater. One of the stands was crooked and missing 4 holes. They sent me another pair and a FedEx slip for the fubared set at no cost. I heart Sweetwater.
The "instructions" say to "obtain a 4 mil poly bag" for the sand. Good luck finding 4 x 34 inch poly bags anywhere! The guys at Raxess didn't even know where to get them. I thought about filling freezer bags and stuffing them in, but the idea is completely fill the space, so I just put some silicone caulk around the outside of the column/base join to (I hope) avoid leakage.
As for the sand - forget Ace or Lowes - go to a concrete supply place and get pure silica sandblasting sand. The playground sand at the hardware store is moist and has dirt in it. The silica sand came in a 100 lb (!!) bag for $12. It took half a bag to fill the stands.
I also got the Mopads. Yeah they're just cut foam slabs but they do help the sound and they can angle the speakers if you need to. They are overpriced but way cheaper than the other speaker decoupler things somebody suggested (which themselves are just foam slabs with a steel plate in them).
S0 don't stress about the Mopads, you can always add them later. Just get those Events off the floor, man!
Re: which of these 3 monitor stands + mopads?
Thanks everyone for your input. I think I'm going with the Raxess. I need 42" because I am standing not sitting. I will pass on the Mopads (thanks 3phase) and try to get some generic foam, hopefully it will do the trick.
Thanks yoyo for your tips on the Raxess.
Next step will be monitor shopping
Thanks yoyo for your tips on the Raxess.
Next step will be monitor shopping
Re: which of these 3 monitor stands + mopads?
OK what about these K&M adjustable steel monitor stands, can anyone see any cons with these? Adjustable would be great in case one day I decide to sit down while producing.
$210 delivered
http://www.bhphotovideo.com/c/product/5 ... nitor.html
$210 delivered
http://www.bhphotovideo.com/c/product/5 ... nitor.html
-
- Posts: 1253
- Joined: Fri Aug 31, 2007 5:50 pm
- Location: UK Midlands
Re: which of these 3 monitor stands + mopads?
nowtime wrote:I will pass on the Mopads (thanks 3phase) and try to get some generic foam, hopefully it will do the trick.
If your stands have a reasonable mass then you don't need foam. blu-tack (or similar) will couple the monitors and stands, any decent stand should have a spiked bass to allow it to couple to the floor through carpet etc, which should result in a nice inert system, the ideal situation for any speaker.
The idea behind foam isolators is to decouple the monitor from a resonant surface, like for eg. a desk.
Sand filled stands shouldn't resonate.