192k support hosed in 8.2.2b3?

jbodango · Post by **jbodango** » Thu Feb 17, 2011 9:41 pm

Live was behaving nicely with sampling rate 192k setting as of 8.2.1... but I can't get 8.2.2b3 to work

I've tried several combinations of switching my MOTU Traveler from 44,48,or 96 to 192k, pre and post startup of Ableton. I've tried changing the settings via Ableton's Preferences, and also from the MOTU configuration app. I've been sure to close the configuration app when Ableton is running. I've also tried updating the drivers, and clearing the config settings of Ableton.

I've been able to reproduce this issue on both osx 10.6.5 and 10.6.6.

Any suggestions or explanation whats going on?

Mac Pro (late 2008) 8 core, 14GB ram
MOTU Traveler

jbodango · Post by **jbodango** » Sun Feb 20, 2011 7:37 am

and on 10.7 now as well.

[pgr] · Post by **[pgr]** » Tue Feb 22, 2011 6:37 pm

Hi,
thanks for your report. I briefly checked Live 8.2.1 and 8.2.2b3 with a MOTU Traveler and a Sample Rate of 192khz and it worked well. Also, I could change the Sample Rate in Live's preferences as well as in MOTU's Audio Setup.
If the problem persists, please send an e-mail to support@ableton.com that contains the following information:
- which version of the MOTU Traveler are you using, also which Firmware- and driver-version?
- the exact phenomenon you experience
- a valid Live 8.2.2b3 Status Report (to be created via the "Help" menu)
Thank you!
Best,
Philipp

cids · Post by **cids** » Thu Feb 24, 2011 11:51 am

@ jbodango Just curious, how did you manage to test on 10.7...?

jbodango · Post by **jbodango** » Thu Feb 24, 2011 8:56 pm

retracted

jbodango · Post by **jbodango** » Thu Feb 24, 2011 8:59 pm

[pgr] wrote:Hi,
thanks for your report. I briefly checked Live 8.2.1 and 8.2.2b3 with a MOTU Traveler and a Sample Rate of 192khz and it worked well. Also, I could change the Sample Rate in Live's preferences as well as in MOTU's Audio Setup.
If the problem persists, please send an e-mail to support@ableton.com that contains the following information:
- which version of the MOTU Traveler are you using, also which Firmware- and driver-version?
- the exact phenomenon you experience
- a valid Live 8.2.2b3 Status Report (to be created via the "Help" menu)
Thank you!
Best,
Philipp

Thanks for the follow up Philipp.
I'll send an email.

Cheers,
jda

jbodango · Post by **jbodango** » Fri Feb 25, 2011 6:36 am

Correction... I meant to say 10.6.7...

The motu configuration app doesn't work at all with 10.7

192k support hosed in 8.2.2b3?

192k support hosed in 8.2.2b3?

Re: 192k support hosed in 8.2.2b3?

Re: 192k support hosed in 8.2.2b3?

Re: 192k support hosed in 8.2.2b3?

Re: 192k support hosed in 8.2.2b3?

Re: 192k support hosed in 8.2.2b3?

Re: 192k support hosed in 8.2.2b3?