track volume changes on its own...

Discuss music production with Ableton Live.
bertzerk
Posts: 67
Joined: Fri Jan 25, 2008 9:40 pm

track volume changes on its own...

Post by bertzerk » Fri Apr 08, 2011 8:56 am

for some reason 2 of my tracks in my current project will just change volume..

i keep resetting my track to -6 or 0 or whatever, and a few minutes of mucking around, one keeps going down to -17 or -16 and the other one jumps to -7 or-6..

no automation, no clip automation, what gives? its happened like 5 or 6 times over the last few hours and i cant seem to find the problem. :x

ciw
Posts: 689
Joined: Thu Dec 29, 2005 5:36 pm
Location: Cardiff, UK

Re: track volume changes on its own...

Post by ciw » Fri Apr 08, 2011 9:29 am

are you sure there is no automation?

what about midi mappings or control surfaces?

bertzerk
Posts: 67
Joined: Fri Jan 25, 2008 9:40 pm

Re: track volume changes on its own...

Post by bertzerk » Fri Apr 08, 2011 6:47 pm

sure there is no automation...nothing midimapped either...

i didnt see it happen till today...the track was playing and i saw the entire automation line just move down by itself..

so weird. and annoying.

Tone Deft
Posts: 24152
Joined: Mon Oct 02, 2006 5:19 pm

Re: track volume changes on its own...

Post by Tone Deft » Fri Apr 08, 2011 6:55 pm

no external gear?


are there any little red squares on the fader?
In my life
Why do I smile
At people who I'd much rather kick in the eye?
-Moz

bertzerk
Posts: 67
Joined: Fri Jan 25, 2008 9:40 pm

Re: track volume changes on its own...

Post by bertzerk » Fri Apr 08, 2011 8:29 pm

ok..so...noticed that when it happens, my midi in and key in squares flash on and off for no reason. nothing is being touched. i dont even have anything keymapped
so weird

Tone Deft
Posts: 24152
Joined: Mon Oct 02, 2006 5:19 pm

Re: track volume changes on its own...

Post by Tone Deft » Fri Apr 08, 2011 8:37 pm

Tone Deft wrote:no external gear?
:?: :?: :?: :?: :?:
In my life
Why do I smile
At people who I'd much rather kick in the eye?
-Moz

nuxnamon
Posts: 1770
Joined: Sun Oct 21, 2007 10:59 pm
Location: 650 area

Re: track volume changes on its own...

Post by nuxnamon » Fri Apr 08, 2011 9:22 pm

take a break from it.. maybe your overlooking something simple.. watch a movie.. I heard paranormal activity was good :)

bertzerk
Posts: 67
Joined: Fri Jan 25, 2008 9:40 pm

Re: track volume changes on its own...

Post by bertzerk » Sat Apr 09, 2011 2:06 am

Tone Deft wrote:
Tone Deft wrote:no external gear?
:?: :?: :?: :?: :?:

my apc and my keyboard controller that are always plugged in ...didnt change any settings or anything..

LoopStationZebra
Posts: 10586
Joined: Sat Jan 17, 2009 5:57 pm
Contact:

Re: track volume changes on its own...

Post by LoopStationZebra » Sat Apr 09, 2011 2:18 am

bertzerk wrote:
Tone Deft wrote:
Tone Deft wrote:no external gear?
:?: :?: :?: :?: :?:

my apc and my keyboard controller that are always plugged in ...didnt change any settings or anything..

Well, eh. Let's start some elimination, shall we?

Unplug both. Does it still happen?

Unplug one. Does it still happen?

Unplug the other. Does it still happen?

You see where I'm going with this, right? :lol:

Offhand, I'm guessing it's your keyboard controller. What kind is it?
I came for the :lol:
But stayed for the :x

ark
Posts: 1382
Joined: Thu Feb 26, 2009 4:25 pm
Location: New Jersey, USA
Contact:

Re: track volume changes on its own...

Post by ark » Sat Apr 09, 2011 5:54 pm

Does your keyboard have a volume pedal attached to it? Perhaps you nudged the pedal and it sent a CC signal that Live read.

bertzerk
Posts: 67
Joined: Fri Jan 25, 2008 9:40 pm

Re: track volume changes on its own...

Post by bertzerk » Sun Apr 10, 2011 8:45 am

it happens all the time now. i did unplug everything one by one...its def not my keyboard..

it seems to be the APC. i can be touching nothing and the faders just go crazy. :evil:

i checked all my settings...everything is what it was before.

why would both my midi in and out indicators be flashing?

thanks for the replys btw.

chapelier fou
Posts: 6165
Joined: Mon May 15, 2006 12:15 pm

Re: track volume changes on its own...

Post by chapelier fou » Sun Apr 10, 2011 12:35 pm

i don't have an APC. But have you tried mapping the problematic faders to something else and see if still modulates the new parameter ?
MacBook Pro 13" Retina i7 2.8 GHz OS 10.13, L10.0.1, M4L.
MacStudio M1Max 32Go OS 12.3.1

willdahbe
Posts: 499
Joined: Tue Jan 16, 2007 8:35 am

Re: track volume changes on its own...

Post by willdahbe » Sun Apr 10, 2011 8:18 pm

Try blasting your faders with some canned air.

bertzerk
Posts: 67
Joined: Fri Jan 25, 2008 9:40 pm

Re: track volume changes on its own...

Post by bertzerk » Wed Apr 13, 2011 4:43 am

willdahbe wrote:Try blasting your faders with some canned air.

THIS WORKED. pheeeeeew...


i had a cover over it, but i guess it didnt really do the job.


thanks for the suggestion.

chrissobo13
Posts: 168
Joined: Fri May 18, 2012 4:40 pm

Re: track volume changes on its own...

Post by chrissobo13 » Fri Jun 01, 2012 2:10 am

Yup, same thing happens to me. Its definitely the APC, second channel's fader. I noticed it moving slightly the day I got it, and after some fruitless searches on the subject I decided to cut my losses. Now that I'm trying to map controls on my MPK, the CC value almost instantly changes to 7, as the amplitude is drunkenly wandering and thus always imputing MIDI data (at least that's what I assume). Since this is way out of my league to fix, I thought I'd give this thread a bump.

PS - compressed air did not work, unfortunately.

Post Reply