how to capture midi from program
-
- Posts: 76
- Joined: Wed Jun 08, 2011 1:50 am
how to capture midi from program
Hey guys,
Ive got a chord mapping program that I am trying to connect into ableton so i can capture its midi output..
Problem is in midi-ox i can only see the Microsoft GS synth. How do I setup the routing so that ableton can record the midi coming out from the program?
Cheers,
Jon
Ive got a chord mapping program that I am trying to connect into ableton so i can capture its midi output..
Problem is in midi-ox i can only see the Microsoft GS synth. How do I setup the routing so that ableton can record the midi coming out from the program?
Cheers,
Jon
Re: how to capture midi from program
try using MIDI YOKE, not MIDI OX (available on the same website).
route the output of your program to MIDI YOKE 1 and then in Live get the input from MIDI YOKE 1.
route the output of your program to MIDI YOKE 1 and then in Live get the input from MIDI YOKE 1.
-
- Posts: 76
- Joined: Wed Jun 08, 2011 1:50 am
Re: how to capture midi from program
yeh because its just a standalone program without any routing options im not sure how to know what device is sending its midi out.. I've tried routing from the MS GS synth but midi ox is showing no traffic.
-
- Posts: 76
- Joined: Wed Jun 08, 2011 1:50 am
Re: how to capture midi from program
ok so still no joy with this.
Does anyone know how to find out how to route midi from internal GS synth to ableton?
I'm guessing this program is using the internal GS synth but I dont know for sure.
How would I find which midi port it is using so I can then patch with midi-yoke?
Cheers,
Jon
Does anyone know how to find out how to route midi from internal GS synth to ableton?
I'm guessing this program is using the internal GS synth but I dont know for sure.
How would I find which midi port it is using so I can then patch with midi-yoke?
Cheers,
Jon
-
- Posts: 8913
- Joined: Thu Apr 22, 2010 5:50 pm
Re: how to capture midi from program
For MIDI Outputs in Midi-ox I can see both GS and MIDI Mapper.
Try this:
Select a Midi-Yoke Input but also select a different # Midi-Yoke Output.
Open the Midi Routings window.
You should be able to make a connection between the GS/MIDI Mapper Output to Midi-Yoke Input (I'm not sure if GS, MIDI Mapper or both need to be connected for your setup).
Then make a connection between Midi Yoke Input to different # Midi Yoke Output.
Like:
GS/MM Out -> Midi Yoke 2 Input -> Midi Yoke 1 Output -> Live Midi Yoke 1 Input.
Or maybe it would be easier to use the computer keyboard as a midi keyboard straight in Live?
Try this:
Select a Midi-Yoke Input but also select a different # Midi-Yoke Output.
Open the Midi Routings window.
You should be able to make a connection between the GS/MIDI Mapper Output to Midi-Yoke Input (I'm not sure if GS, MIDI Mapper or both need to be connected for your setup).
Then make a connection between Midi Yoke Input to different # Midi Yoke Output.
Like:
GS/MM Out -> Midi Yoke 2 Input -> Midi Yoke 1 Output -> Live Midi Yoke 1 Input.
Or maybe it would be easier to use the computer keyboard as a midi keyboard straight in Live?
-
- Posts: 76
- Joined: Wed Jun 08, 2011 1:50 am
Re: how to capture midi from program
Hi Shadx,
When you say midi routings windows in MIDI-OX do you mean the MIDI devices?
At the moment I've got the GS Synth as a MIDI output and the MIDI yoke: 2 as the MIDI Input.
I've been a bit baffled by windows 7 not allowing me to change the default MIDI output but after editing the registry abit I think I've managed to get the default MIDI output changed to the USB midi interface I'm using atm.. but I think this program (which is Chordmaps - yours to play which plays chords from mouse clicks im trying to grab that midi output)i think still is using the GS Synth.
Cheers,
Jon
When you say midi routings windows in MIDI-OX do you mean the MIDI devices?
At the moment I've got the GS Synth as a MIDI output and the MIDI yoke: 2 as the MIDI Input.
I've been a bit baffled by windows 7 not allowing me to change the default MIDI output but after editing the registry abit I think I've managed to get the default MIDI output changed to the USB midi interface I'm using atm.. but I think this program (which is Chordmaps - yours to play which plays chords from mouse clicks im trying to grab that midi output)i think still is using the GS Synth.
Cheers,
Jon
Re: how to capture midi from program
Also check out loopMIDI which supports windows 8 and 64bit OS
http://www.tobias-erichsen.de/software/loopmidi.html
MIDI Yoke doesn't seem to be supported any longer.
http://www.tobias-erichsen.de/software/loopmidi.html
MIDI Yoke doesn't seem to be supported any longer.
"The banjo is the perfect instrument for the antisocial."
(Allow me to plug my guitar scale visualiser thingy - www.fretlearner.com)
(Allow me to plug my guitar scale visualiser thingy - www.fretlearner.com)
-
- Posts: 76
- Joined: Wed Jun 08, 2011 1:50 am
Re: how to capture midi from program
ok so in midi port routing my line goes GS Synth > MIDI yoke 2 In > MIDI yoke 1 Out > MIDI yoke 1 In.
Have got MIDI yoke 1 set as the MIDI from in Live.. but no midi notes show yet..
Have got MIDI yoke 1 set as the MIDI from in Live.. but no midi notes show yet..
-
- Posts: 76
- Joined: Wed Jun 08, 2011 1:50 am
Re: how to capture midi from program
http://answers.microsoft.com/en-us/wind ... 85b?page=4
I tried the solution here to change the default midi output to my USB soundcard but no joy there either..
I tried the solution here to change the default midi output to my USB soundcard but no joy there either..
-
- Posts: 8913
- Joined: Thu Apr 22, 2010 5:50 pm
-
- Posts: 76
- Joined: Wed Jun 08, 2011 1:50 am
Re: how to capture midi from program
I dont, I just want to capture the midi data coming from the program (which i believe is using the GS).
-
- Posts: 8913
- Joined: Thu Apr 22, 2010 5:50 pm
Re: how to capture midi from program
Oops, sorry I missed a post of yours, too.
I'd say forget the GS part and stick to midi-yoke. You shouldn't even need Midi-Ox, just midi-yoke.
You should have Midi-yoke outputs showing in Chordmap. The site comes up as 404 for me.
It's more straightforward.
ChordMap = Midi Yoke Out 1 -> Live Midi Yoke In 2
It doesn't really matter which Yoke port # you use as long as you don't choose the same port # between Chordmap and Live otherwise you'll get a feedback loop and probly freeze Live. Don't forget you'll need to select the Midi Yoke Track Input in Live's preferences.
Otherwise there are a couple chord vst's you can use straight in Live, Chordspace being one of them.
I'd say forget the GS part and stick to midi-yoke. You shouldn't even need Midi-Ox, just midi-yoke.
You should have Midi-yoke outputs showing in Chordmap. The site comes up as 404 for me.
It's more straightforward.
ChordMap = Midi Yoke Out 1 -> Live Midi Yoke In 2
It doesn't really matter which Yoke port # you use as long as you don't choose the same port # between Chordmap and Live otherwise you'll get a feedback loop and probly freeze Live. Don't forget you'll need to select the Midi Yoke Track Input in Live's preferences.
Otherwise there are a couple chord vst's you can use straight in Live, Chordspace being one of them.
-
- Posts: 76
- Joined: Wed Jun 08, 2011 1:50 am
Re: how to capture midi from program
the program is from http://mugglinworks.com/chordmaps/
The problem is the program is quite basic so has no option to select or show midi-outputs.
The problem is the program is quite basic so has no option to select or show midi-outputs.
-
- Posts: 8913
- Joined: Thu Apr 22, 2010 5:50 pm
Re: how to capture midi from program
I already have the GS synth as my default and I'm not getting any sound either, or midi activity.
The only mention of how to set it up is in the faq, which is "check your windows midi shit"
This guy doesn't deserve business. It's like he wrote it for Windows 95 with no documentation. Hellz no.
Get Chordspace or Improvisator, stick it in a midi track, have another midi track receive midi from it.
Or use this: http://www.mediafire.com/?4y84v8mmr5d36hh
It's a midi effect rack with 108 different chords.
Major, Minor and Alt chords
6 chord types with 6 inversion for each chord.
I was waiting to make a tutorial on it to show how well it works when you set up a controller for it (use only 18 keys to choose between the 108 chords) but I'll let it out here for now.
You can just drag it into your set and save it from there.
The only mention of how to set it up is in the faq, which is "check your windows midi shit"
This guy doesn't deserve business. It's like he wrote it for Windows 95 with no documentation. Hellz no.
Get Chordspace or Improvisator, stick it in a midi track, have another midi track receive midi from it.
Or use this: http://www.mediafire.com/?4y84v8mmr5d36hh
It's a midi effect rack with 108 different chords.
Major, Minor and Alt chords
6 chord types with 6 inversion for each chord.
I was waiting to make a tutorial on it to show how well it works when you set up a controller for it (use only 18 keys to choose between the 108 chords) but I'll let it out here for now.
You can just drag it into your set and save it from there.
Last edited by regretfullySaid on Mon Jul 01, 2013 1:45 pm, edited 2 times in total.
-
- Posts: 76
- Joined: Wed Jun 08, 2011 1:50 am
Re: how to capture midi from program
ableton says 'the preset cant be loaded probably it is broken'.
I'll check out chordspace.
cheers,
Jon
I'll check out chordspace.
cheers,
Jon