Using the Touch Strip to control Mod wheel in a synth?

Discuss Push with other users.
Simbosan
Posts: 301
Joined: Tue Aug 05, 2008 11:35 am
Location: Auckland, New Zealand
Contact:

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by Simbosan » Wed Aug 07, 2013 4:44 pm

+1
Ableton 9 Suite - Ozone 5
Room full of guitars!
Akai EWI USB : Loads of Sample Modeling instruments (the best ever!)
M-Audio FastTrack Pro
Turbo Nutter B*stard >>>> WINDOWS <<<< PC
Simbosan on Soundcloud

WordsworthESP
Posts: 1
Joined: Sat Dec 25, 2010 8:18 am

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by WordsworthESP » Sat Aug 17, 2013 10:17 pm

featherodd wrote:Here's is the M4L device I cobbled together from Jürgen Moßgraber's Program Change patch by simply adding a Modwheel knob (cc1):
http://rawcanvas.com/_/DialToProgramChange.amxd

I'm using the 32-bit version of Live. No idea if it run in the 64-bit version.
I'm curious, do you believe this M4L device would allow for mapping third-party synth's modulation to say, the computer keyboard? Unfortunately, Ableton doesn't allow Clip Envelopes to be mapped for some reason, and I've tried several of the work arounds to no avail. The common theme of answers tends to be that it would be fairly easy to program into M4L, however at this moment my knowledge in M4L is very limited. I was hoping this device would also work for what I'm seeking.

I apologize for resurrecting an older thread, and additionally I realize it's also probably not the right section either - but this thread was displayed in one of my many Google searches on the matter, and I figured since everyone seems to think it would be easy to do in M4L - that this would be an appropriate place to post such a question opposed to creating a new thread.

Edit: It seems to work, at least with Hypersonic 2, though since I'm using my computer keyboard it tends to work as an on/off switch (0/127.) So I've just got to do a little more digging into M4L programming to find out how to increase & decrease the modulation value incrementally. Even if I'm not able to figure out how to do so, it still makes modulation automation so much easier than trying to do so in the Clip Envelope section.
Last edited by WordsworthESP on Sat Aug 17, 2013 11:36 pm, edited 2 times in total.

Tarekith
Posts: 19072
Joined: Fri Jan 07, 2005 11:46 pm
Location: Ableton Forum Administrator
Contact:

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by Tarekith » Sat Aug 17, 2013 11:11 pm

Another vote for a user switch between mod wheel and pitchbend.
Tarekith
Ableton Forum Administrator
https://tarekith.com

justin
Posts: 395
Joined: Mon Jul 05, 2004 11:48 am
Location: UK
Contact:

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by justin » Sun Aug 18, 2013 11:53 am

+1 for this solution if its possible...
daichtrax wrote:i agree it seems like touch strip midi mapping should be part of push setup screen (if it is not already)

check box: map push touch strip to

drop down:
pitch bend
mod wheel
cc

then for cc a text box to type in the cc value

willdahbe
Posts: 499
Joined: Tue Jan 16, 2007 8:35 am

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by willdahbe » Wed Aug 21, 2013 5:26 am

+1 on user selectable pitch/mod strip.

Simbosan
Posts: 301
Joined: Tue Aug 05, 2008 11:35 am
Location: Auckland, New Zealand
Contact:

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by Simbosan » Sat Aug 24, 2013 10:10 pm

Thought I would have a play in Max and see what I could come up with. It's the second thing I have tried to build so there's probably a lot of scope for improvement, but here's a useful first stab.

What it does is allow you to remap Pitch Bend up to one CC and Pitch Bend down to another. Why did I do it like that? Because the pitch bend CC always reverts to 64, and it would be impossible to map it between 0 and 127 using the full range without all sorts of awful code to suppress that behaviour. I have used the high resolution pitch bend control message so there should be no uneven change.

With this you could for example, map Pitch Up to Mod Wheel, and Pitch Down to Expression. Yes I included aftertouch too, even though the keys have aftertouch (and no Ableton doesn't support poly aftertouch before you ask), but it could be useful. You can also specify custom CC if you can think of a useful one.

It seems to work nicely for Modwheel and Expression so far.

I hope I have packaged it up correctly, never shared a device before!

Grab it here:
http://www.nzdeb.com/simbosan/PushPitchbendMapper.zip

Next steps:
1) I was thinking of doing something to allow you to map them to Rack controls like the Expression Control device but then I thought, you can use that device anyway!
2) Presets: you can't save stuff yet. Will get that working soon as I learn how =)
3) Suggestions!

I also did an ultra simple quicky to reverse the polarity (so Star Trek!) of my sustain pedal
http://www.nzdeb.com/simbosan/SustainPedalReverse.zip

Anyway, any feedback / restrained abuse welcome

S
Ableton 9 Suite - Ozone 5
Room full of guitars!
Akai EWI USB : Loads of Sample Modeling instruments (the best ever!)
M-Audio FastTrack Pro
Turbo Nutter B*stard >>>> WINDOWS <<<< PC
Simbosan on Soundcloud

acidshell
Posts: 5
Joined: Fri Dec 23, 2011 7:41 pm
Location: Dublin, Ireland
Contact:

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by acidshell » Sat Aug 31, 2013 7:48 pm

Theres a Max 4 live Push device for this. Just go tot he Max 4 live site and filter by push devices. Theres only 3 there and its one of them.

Then assign it to a controller
:mrgreen:

Simbosan
Posts: 301
Joined: Tue Aug 05, 2008 11:35 am
Location: Auckland, New Zealand
Contact:

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by Simbosan » Sat Aug 31, 2013 9:43 pm

Not finding what your on about.

I tried maxforlive.com. filtered for push, nothing like this. Can you link a device?
Ableton 9 Suite - Ozone 5
Room full of guitars!
Akai EWI USB : Loads of Sample Modeling instruments (the best ever!)
M-Audio FastTrack Pro
Turbo Nutter B*stard >>>> WINDOWS <<<< PC
Simbosan on Soundcloud

Perpetual Rift
Posts: 15
Joined: Sun Dec 30, 2012 4:20 am

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by Perpetual Rift » Mon Oct 28, 2013 4:14 am

daichtrax wrote:i agree it seems like touch strip midi mapping should be part of push setup screen (if it is not already)

check box: map push touch strip to

drop down:
pitch bend
mod wheel
cc

then for cc a text box to type in the cc value
THIS!

Okay, Ableton? I gave you $600 for a MIDI controller. Now do what this guy said.

Scrybz
Posts: 3
Joined: Fri Nov 08, 2013 8:17 am

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by Scrybz » Fri Nov 15, 2013 4:48 am

Perpetual Rift wrote:
daichtrax wrote:i agree it seems like touch strip midi mapping should be part of push setup screen (if it is not already)

check box: map push touch strip to

drop down:
pitch bend
mod wheel
cc

then for cc a text box to type in the cc value
THIS!

Okay, Ableton? I gave you $600 for a MIDI controller. Now do what this guy said.
Adding my name to this wishlist item, too!

tedlogan
Posts: 1347
Joined: Thu Dec 20, 2012 7:23 pm
Location: Leamington Spa, UK
Contact:

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by tedlogan » Fri Nov 15, 2013 5:03 pm

+1.

Now that Zebra is my god, I badly need modwheel support.

Scrybz
Posts: 3
Joined: Fri Nov 08, 2013 8:17 am

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by Scrybz » Sat Nov 23, 2013 7:09 am

I think I'd be okay with keeping the pitch bend the way it is, but have the "Swing" encoder be remapped as modwheel. Maybe hold down the "User" button, and get the option to turn "Swing" into a modwheel, and be able to do clip level automation on it.

Simbosan
Posts: 301
Joined: Tue Aug 05, 2008 11:35 am
Location: Auckland, New Zealand
Contact:

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by Simbosan » Sat Nov 23, 2013 6:08 pm

one thing that i find myself doing is using button aftertouch instead of the strip, it feels very natural
Ableton 9 Suite - Ozone 5
Room full of guitars!
Akai EWI USB : Loads of Sample Modeling instruments (the best ever!)
M-Audio FastTrack Pro
Turbo Nutter B*stard >>>> WINDOWS <<<< PC
Simbosan on Soundcloud

ScottIII
Posts: 2
Joined: Sat Aug 06, 2011 10:55 am

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by ScottIII » Sat Nov 23, 2013 11:45 pm

+1 (swing button or touch strip)

ScottIII
Posts: 2
Joined: Sat Aug 06, 2011 10:55 am

Re: Using the Touch Strip to control Mod wheel in a synth?

Post by ScottIII » Sat Nov 23, 2013 11:48 pm

Simbosan wrote:one thing that i find myself doing is using button aftertouch instead of the strip, it feels very natural
How do you link modulation to after touch?

Post Reply