The occasional freezes of Push

Discuss Push with other users.
4.33
Posts: 1198
Joined: Tue Jul 03, 2007 12:49 pm
Location: Moscow

The occasional freezes of Push

Post by 4.33 » Wed Jan 01, 2014 11:59 pm

Brand new unit, it will freeze rather randomly when connected to a powered USB hub, and the only fix is to reboot it.
Connections are as follows: Push into Belkin USB-hub into MBP late-13

Anybody with similar problem and a better fix?)

jestermgee
Posts: 4500
Joined: Mon Apr 26, 2010 6:38 am

Re: The occasional freezes of Push

Post by jestermgee » Thu Jan 02, 2014 3:01 am

Just to rule out anything with the hub have you just tested it connected directly to the PC?

Just FYI on a Win7 PC I have Push connected to a 10 port powered hub and no issues.

4.33
Posts: 1198
Joined: Tue Jul 03, 2007 12:49 pm
Location: Moscow

Re: The occasional freezes of Push

Post by 4.33 » Fri Jan 03, 2014 9:55 am

yeah, no problems when connected directly, only when through the hub.
so, contrary to the popular belief - belkin usb hub, even powered, is utter shite

H20nly
Posts: 16058
Joined: Sat Oct 27, 2007 9:15 pm
Location: The Wild West

Re: The occasional freezes of Push

Post by H20nly » Fri Jan 03, 2014 4:54 pm

have you tried changing the port the hub is plugged into?

4.33
Posts: 1198
Joined: Tue Jul 03, 2007 12:49 pm
Location: Moscow

Re: The occasional freezes of Push

Post by 4.33 » Sun Jan 05, 2014 7:45 am

H20nly wrote:have you tried changing the port the hub is plugged into?
That seemed to work, thanks mate!

n8tron
Posts: 173
Joined: Thu May 26, 2005 8:57 pm

Re: The occasional freezes of Push

Post by n8tron » Sun Jan 05, 2014 10:04 pm

I get freezes a lot with the cable directly plugged into my macbook. Sometimes the pads will still light up in response, but hitting them will do nothing. Other times it will sort of freeze in whatever state it was in and will not change or respond to direct or through ableton changes. If I restart it it will usually work again for anywhere from 5 seconds to as long as I'm working...

4.33
Posts: 1198
Joined: Tue Jul 03, 2007 12:49 pm
Location: Moscow

Re: The occasional freezes of Push

Post by 4.33 » Tue Jan 07, 2014 8:07 am

A port issue, apparently

joefrost01
Posts: 67
Joined: Mon Oct 04, 2010 12:54 pm

Re: The occasional freezes of Push

Post by joefrost01 » Tue Jan 07, 2014 11:28 am

I also get freezes with Push directly connected to my MacBook but I only noticed this with Live 9.1, before that it seemed to work fine.

Maybe I'll try running it with an earlier version again just to confirm that's the case.

Switching Push off and on will clear the problem for a while.

H20nly
Posts: 16058
Joined: Sat Oct 27, 2007 9:15 pm
Location: The Wild West

Re: The occasional freezes of Push

Post by H20nly » Tue Jan 07, 2014 4:47 pm

4.33 wrote:
H20nly wrote:have you tried changing the port the hub is plugged into?
That seemed to work, thanks mate!
glad it helped...

USB 3 can transfer more power, but USB 2.0 can have issues if spread too thin with too many USB powered devices plugged into the same port. maybe this is what was causing your grief.

4.33
Posts: 1198
Joined: Tue Jul 03, 2007 12:49 pm
Location: Moscow

Re: The occasional freezes of Push

Post by 4.33 » Thu Jan 09, 2014 9:58 am

unfortunately, my joy was premature and the problem persists.
different hubs, different ports, same story.
guys, let's file some support tickets - it's no good

deepdirtydub
Posts: 173
Joined: Wed Jul 21, 2004 10:14 pm
Location: Kitchener

Re: The occasional freezes of Push

Post by deepdirtydub » Sun Jan 19, 2014 5:14 pm

I've been having problems as well and so far Im still trying to isolate and recreate the problem. I've been getting freezes and a wonky unresponsive Push when also using a Novation Launch Control/iConnectmidi2+ in my setup. I think it could be a bad or overloaded USB hub. Im on 9.1 and OSX ML I'll keep experimenting and report back. Is anyone else having any issues?

Airyck
Posts: 739
Joined: Thu Jul 02, 2009 11:54 pm
Location: Phoenix, AZ

Re: The occasional freezes of Push

Post by Airyck » Sun Jan 19, 2014 10:04 pm

Don't forget to try a different USB cable if you haven't already. Also try plugging your power supply for the push into a different outlet if available. Some power strips will limit the current as well so I guess just try to see if it's a power issue. (flaky power can cause these kinds of problems too)

Good luck.
Ableton Live 10 Suite / Push 2 / Max 8 /

jestermgee
Posts: 4500
Joined: Mon Apr 26, 2010 6:38 am

Re: The occasional freezes of Push

Post by jestermgee » Mon Jan 20, 2014 12:27 am

Well out of no where I have started to see the occasional lockup of Push too :(

Last night wile doing sound mixing for a film I had the PC running for several hours but wasn't using Push at all, just in arrangement.

When I looked over I noticed the LCD was blank but illuminated so I tried to switch to a MIDI track and it didn't do anything at all. I power cycled Push and it came good. This happened 2 times last night and nothing in my setup has changed.

Not about to complain yet without looking into it but I have a feeling something may be awry with the latest 9.1.

deepdirtydub
Posts: 173
Joined: Wed Jul 21, 2004 10:14 pm
Location: Kitchener

Re: The occasional freezes of Push

Post by deepdirtydub » Wed Jan 22, 2014 3:25 am

So I tried a different arrangement with my devices and usb hub and it seems to have fixed the problem. So far so good!

Airyck
Posts: 739
Joined: Thu Jul 02, 2009 11:54 pm
Location: Phoenix, AZ

Re: The occasional freezes of Push

Post by Airyck » Wed Jan 22, 2014 3:49 am

nevermind
Ableton Live 10 Suite / Push 2 / Max 8 /

Post Reply