The nine point two thread
Re: The nine point two thread
As with all software I'd advise users to complete any urgent projects on the system they started them on.
EG: in this case if you started an album in L9.1x then you ought to complete that project under that version. By all means install the new software in parallel, but you don't want to be discovering that a new and improved feature has in some way changed the sound of something on you. For example : the latency calculations getting fixed, if you have been offsetting automation, well now that it's fixed you'd have over-corrected in your old file.
So, my advice would be for any important projects with deadlines - complete them in the version you started in.
For your new projects and stuff that has no deadline - work in 9.2
EG: in this case if you started an album in L9.1x then you ought to complete that project under that version. By all means install the new software in parallel, but you don't want to be discovering that a new and improved feature has in some way changed the sound of something on you. For example : the latency calculations getting fixed, if you have been offsetting automation, well now that it's fixed you'd have over-corrected in your old file.
So, my advice would be for any important projects with deadlines - complete them in the version you started in.
For your new projects and stuff that has no deadline - work in 9.2
-
- Posts: 4598
- Joined: Fri Dec 28, 2007 9:42 am
- Location: Hoerikwaggo's sunset side...
- Contact:
Re: The nine point two thread
The name is the same. At least in OSX. Ableton Live 9 Standard.app.stevemac wrote:Thanks dude, but if the one in the location has a 'newer name', would that suggest it's already there!?re:dream wrote:Replace.
But I did not get that message. It just installed , quick as a snake.
It is odd. On my Mac Mini, I was not asked whether I wanted to replace the existing version. On my MBP, I was.
-
- Posts: 439
- Joined: Mon Jun 14, 2010 12:48 am
Re: The nine point two thread
Yes. It seems to me that 9.2 sounds brighter, but also, parts of my songs now sound wrong, probably because of the PDC fix. Part of my struggling for so long with these songs was probably because of the PDC problem, but I didn't realise it. Now I don't know if I should work on those songs in 9.2 to make them "correct" or stick to 9.17 where they were close enough to what I wanted. I had a similar problem where a compressor was defaulted to the master track either by me or by Ableton many versions ago. After coming back to those projects, I knew there was a problem, but couldn't figure it out until I clicked on the master track.Angstrom wrote:As with all software I'd advise users to complete any urgent projects on the system they started them on.
EG: in this case if you started an album in L9.1x then you ought to complete that project under that version. By all means install the new software in parallel, but you don't want to be discovering that a new and improved feature has in some way changed the sound of something on you. For example : the latency calculations getting fixed, if you have been offsetting automation, well now that it's fixed you'd have over-corrected in your old file.
So, my advice would be for any important projects with deadlines - complete them in the version you started in.
For your new projects and stuff that has no deadline - work in 9.2
Re: The nine point two thread
i hate this!
why the fuck they don`t safe their soundengine-changes within the the projects ?
it must be safe to open older projects with actual version without mistuning
and loudness-variation timingissues ect....
Everytime they make it "better", the sound we´ve created sound more worse then it does
on it own without 9.anything-upgrade.
From a Pro-Software we users invested one ounce of gold over the time, we can expect
better for our very creativ work we do.
If somebody come and say: Hey, lets play the track from 3 Years ago we had so much fun with
on that party, i have to reply.. UH...Ähh.. that was Live 7.7beta5 and because my hardware changed
and i`ve upgraded to Live 9.2 i am not able to load the set containing this track... so thats not pro
and i do not see a way ableton is making it easy for us users with that theme.
why the fuck they don`t safe their soundengine-changes within the the projects ?
it must be safe to open older projects with actual version without mistuning
and loudness-variation timingissues ect....
Everytime they make it "better", the sound we´ve created sound more worse then it does
on it own without 9.anything-upgrade.
From a Pro-Software we users invested one ounce of gold over the time, we can expect
better for our very creativ work we do.
If somebody come and say: Hey, lets play the track from 3 Years ago we had so much fun with
on that party, i have to reply.. UH...Ähh.. that was Live 7.7beta5 and because my hardware changed
and i`ve upgraded to Live 9.2 i am not able to load the set containing this track... so thats not pro
and i do not see a way ableton is making it easy for us users with that theme.
::SoundCloud::
Re: The nine point two thread
Tagor wrote:...
it must be safe to open older projects with actual version without mistuning
and loudness-variation timingissues ect....
...
If somebody come and say: Hey, lets play the track from 3 Years ago we had so much fun with
on that party, i have to reply.. UH...Ähh.. that was Live 7.7beta5 and because my hardware changed and i`ve upgraded to Live 9.2 i am not able to load the set containing this track... so thats not pro and i do not see a way ableton is making it easy for us users with that theme.
I totally agree, and that's the why of my 'is it backward compatible?' question.
I think it's a serious problem.
This morning I was listening to some Frank Zappa's interviews in which he says he used to rearrange and modify constantly all his old material.
With those compatibility problems in Live this wouldn't have been possible, with the exeption of maintaining every software version per song, or to not upgrade anymore (!).
To upgrade or not to upgrade, that is the question.
As Shakespeare said.
-
- Posts: 439
- Joined: Mon Jun 14, 2010 12:48 am
Re: The nine point two thread
Okay, I copied all my projects to a new Projects folder - Ableton 920 Projects. Then I felt free to work on a few projects to see if it was worth the effort. Well, it was worth the effort. Much of the problem was that I had become used to hearing the songs without proper PDC. So just listening to the songs a few times got me over that. Then the fixes were fairly easy. Now I have crisper recordings.
Yes, it uses more processing power. And the start of clips sometimes click. But it's worth it, for me. Might have to freeze a few extra tracks to get processing power back. Of course, I've only tried it for 24 hours, so I might change my mind back if there are other problems.
Yes, it uses more processing power. And the start of clips sometimes click. But it's worth it, for me. Might have to freeze a few extra tracks to get processing power back. Of course, I've only tried it for 24 hours, so I might change my mind back if there are other problems.
Re: The nine point two thread
One of the smallest things in 9.2 is the most useful for me: hover over the track devices and it shows the latency of the item.
Of course the PDC is now aligning everything a lot better for playback, but I "play through" a lot, meaning I am playing softsynths with my fingers. So if I drop an old effect rack after the instrument I unavoidably tend to incur played latency but ... now I have a nice readout to alert me where the problem effect is, and I can modify the rack to (for example) get rid of look aheads in compressors.
Tl;dr in live 9.2 I play keyboards better.
Of course the PDC is now aligning everything a lot better for playback, but I "play through" a lot, meaning I am playing softsynths with my fingers. So if I drop an old effect rack after the instrument I unavoidably tend to incur played latency but ... now I have a nice readout to alert me where the problem effect is, and I can modify the rack to (for example) get rid of look aheads in compressors.
Tl;dr in live 9.2 I play keyboards better.
Re: The nine point two thread
Actually. I've noticed that my cpu seems to be running way higher since the update. Anyone else having this issue?
Re: The nine point two thread
Well. The pro thing to do is to finish each project using a single version of all software used in the project, and then export all tracks/stems as audio. There is no way in hell you're going to be sure that no changes in DAW or changes to any plugin used will not change how your project sounds. If you wanted that, then Reason was your only option, but I guess with the inclusion of RE:s (and ReFills) then that won't do either. So. Well. Good luck with that...Tagor wrote:If somebody come and say: Hey, lets play the track from 3 Years ago we had so much fun with
on that party, i have to reply.. UH...Ähh.. that was Live 7.7beta5 and because my hardware changed
and i`ve upgraded to Live 9.2 i am not able to load the set containing this track... so thats not pro
and i do not see a way ableton is making it easy for us users with that theme.
Live + M4L, MacBookPro & Ultralite mk3. Plugins from Softube, Soundtoys, Eventide, 2CAudio, Cytomic, AudioDamage, OhmForce, FabFilter, SonicCharge, Waves, MadronaLabs, NI and ExpertSleepers. Oh, and a bunch of hardware... =D
http://www.pinknoise.se
http://www.pinknoise.se
Re: The nine point two thread
That's likely since he has the material as raw audio, or quite possibly, on tape...filter_7 wrote: This morning I was listening to some Frank Zappa's interviews in which he says he used to rearrange and modify constantly all his old material.
Live + M4L, MacBookPro & Ultralite mk3. Plugins from Softube, Soundtoys, Eventide, 2CAudio, Cytomic, AudioDamage, OhmForce, FabFilter, SonicCharge, Waves, MadronaLabs, NI and ExpertSleepers. Oh, and a bunch of hardware... =D
http://www.pinknoise.se
http://www.pinknoise.se
Re: The nine point two thread
that's not correct.filter_7 wrote:Tagor wrote:...
it must be safe to open older projects with actual version without mistuning
and loudness-variation timingissues ect....
...
If somebody come and say: Hey, lets play the track from 3 Years ago we had so much fun with
on that party, i have to reply.. UH...Ähh.. that was Live 7.7beta5 and because my hardware changed and i`ve upgraded to Live 9.2 i am not able to load the set containing this track... so thats not pro and i do not see a way ableton is making it easy for us users with that theme.
I totally agree, and that's the why of my 'is it backward compatible?' question.
I think it's a serious problem.
This morning I was listening to some Frank Zappa's interviews in which he says he used to rearrange and modify constantly all his old material.
With those compatibility problems in Live this wouldn't have been possible, with the exeption of maintaining every software version per song, or to not upgrade anymore (!).
To upgrade or not to upgrade, that is the question.
As Shakespeare said.
You can open a Live version 2 project perfectly fine in Live9.2. Sure the new version might sound BETTER. But is that really a problem - that the PDC now works right, that the automation is now in sync?
When Zappa put his old tapes recorded in 1972 onto his new multitrack in 1982, do you think they sounded the same? I can tell you that the vinyl version of Hot Rats sounds better to me, but certainly it sounds different than his Digitally fucked with versions. Not the same sounding at all.
In short - all musicians should finish a project and freeze/flatten the audio if they want to keep it sounding as it was when they closed the project. There's no way for manufacturers to anticipate and cater for the heat death of the universe.
Re: The nine point two thread
Good point. So there is no forever backward compatible DAW. This seems reasonable and answers my first question. From a certain point of view it can be considered as a problem, but your idea to finish a song with the version we started on it's the best solution.Angstrom wrote: In short - all musicians should finish a project and freeze/flatten the audio if they want to keep it sounding as it was when they closed the project. There's no way for manufacturers to anticipate and cater for the heat death of the universe.
Regarding Zappa, the interview is about his work with the synclavier, not the tapes.
-
- Posts: 2838
- Joined: Mon Jul 16, 2007 12:27 pm
- Location: UK
- Contact:
Re: The nine point two thread
add this to your Options.txt file for pre-9.2 latency behaviour:
-Pre9.2LatencyBehavior
-Pre9.2LatencyBehavior
Re: The nine point two thread
AARRGGHH!
Why the hell can't Live update straight to the latest version instead of one "point update" at a time (with me having to open & close Live in between)?
Why the hell can't Live update straight to the latest version instead of one "point update" at a time (with me having to open & close Live in between)?