Push 2 Live 9.5 cpu sky high
Push 2 Live 9.5 cpu sky high
Since i got this beauty Push 2 and live 9.5, my live cpu is peaking mount everest, i,ve a super fast computer pc and win 10
there was no problem with push 1 and live 9.2, but now live is close to be unplayable. ive done everything, reinstalled, resetting
all midi gear has been unplugged except push 2 etc etc, and live 9.5, even without push 2, still gets the highest cpu peak with just one sample
or the smallest vst playing.
Anyone with the same problem ? or some idea to solve this ? ( it must be a driver or firmware problem, hopefully...)
Free vst preset racks
https://www.facebook.com/AbletonPushVstRacks/
there was no problem with push 1 and live 9.2, but now live is close to be unplayable. ive done everything, reinstalled, resetting
all midi gear has been unplugged except push 2 etc etc, and live 9.5, even without push 2, still gets the highest cpu peak with just one sample
or the smallest vst playing.
Anyone with the same problem ? or some idea to solve this ? ( it must be a driver or firmware problem, hopefully...)
Free vst preset racks
https://www.facebook.com/AbletonPushVstRacks/
Re: Push 2 Live 9.5 cpu sky high
might be the Ableton indexer proces. check Task Manager and click the CPU column under the Processes tab to view by highest CPU utilization. your culprit should show up on or close to the top. End Task.
Re: Push 2 Live 9.5 cpu sky high
thanks for your help, ive tryed that to, and still its eating my cpu...
-
- Posts: 84
- Joined: Sun Jun 15, 2014 1:06 am
Re: Push 2 Live 9.5 cpu sky high
Make sure you are not leaving Internet Explorer or Firefox windows open when using Ableton/Push. Sometimes I will walk by my laptop while it "should" be doing nothing, and I'll hear the fans going on like blowtorches. It's almost always some FF window I left open on a blog that has Javascript ads. Shut it down and the fans quiet down a minute later. I wish there were a way to throttle browser windows if they start using bou coup CPU while the computer is unattended.
If that's not the answer, then you need to check your insert chains. You're probably pushing the CPU by using too many instances of a processor-hungry effect, such as a reverb.
If so, see if you can get the same result by just bussing together the tracks needing the effect, rather than having the same effect instanced separately on twelve different tracks PLUS the master.
If that's not the answer, then you need to check your insert chains. You're probably pushing the CPU by using too many instances of a processor-hungry effect, such as a reverb.
If so, see if you can get the same result by just bussing together the tracks needing the effect, rather than having the same effect instanced separately on twelve different tracks PLUS the master.
Desktop: Intel i7 hex-core, 64 GB ram, several SSDs, Focusrite Liquid 56, UAD-2.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
Re: Push 2 Live 9.5 cpu sky high
thanks for your help :) but i know all this, and i only have the native effect on the effect sends, and only reverb and delay, master is the same native able effects.
and i also shout down my antivirus program etc etc. The funny/ weird thing is when i open my task bar to see whats eating my cpu, there is no hungry stuff, its quite staple between 3 -8 % and in the same time my live show 60 - 90 and bigger when i tweak parameters, even when my task bar shows something completely different.
But im also very impatience, Live 9.5 and Push 2 is only a week old, so im hopefully waiting for new upgrades and firmware :)
and i also shout down my antivirus program etc etc. The funny/ weird thing is when i open my task bar to see whats eating my cpu, there is no hungry stuff, its quite staple between 3 -8 % and in the same time my live show 60 - 90 and bigger when i tweak parameters, even when my task bar shows something completely different.
But im also very impatience, Live 9.5 and Push 2 is only a week old, so im hopefully waiting for new upgrades and firmware :)
-
- Posts: 84
- Joined: Sun Jun 15, 2014 1:06 am
Re: Push 2 Live 9.5 cpu sky high
Be sure that your CPU display is showing "all processes". If you show only system processes, or only application processes, you could be missing part of the picture.
Another thing to look at is disk usage. If you're not seeing CPU in Resource Monitor, then maybe you've got some I/O-bound tasks running. Looking at disk may help.
If neither of those things pan out, then we'll need to see your computer's specs before we can go any further.
Another thing to look at is disk usage. If you're not seeing CPU in Resource Monitor, then maybe you've got some I/O-bound tasks running. Looking at disk may help.
If neither of those things pan out, then we'll need to see your computer's specs before we can go any further.
Desktop: Intel i7 hex-core, 64 GB ram, several SSDs, Focusrite Liquid 56, UAD-2.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
Re: Push 2 Live 9.5 cpu sky high
Thanks alot for trying to help me .
Ive got an win 10 pc 64bit with 16 gb ram, intel core ( 8x ) i7-4790 cpu 3.60zh, 2tb harddrive
propellerhead balance, live 9.5, push 2
everything works perfect with live 9.2, Push 1
in Task manager, Resource Monitor, i do see my Cpu, in live its 10 times bigger than in Resource Monitor
also all processes are shown, no problem there.
Ive got an win 10 pc 64bit with 16 gb ram, intel core ( 8x ) i7-4790 cpu 3.60zh, 2tb harddrive
propellerhead balance, live 9.5, push 2
everything works perfect with live 9.2, Push 1
in Task manager, Resource Monitor, i do see my Cpu, in live its 10 times bigger than in Resource Monitor
also all processes are shown, no problem there.
-
- Posts: 84
- Joined: Sun Jun 15, 2014 1:06 am
Re: Push 2 Live 9.5 cpu sky high
That's good you can see it.
I'm a little fuzzy on how you typed this phrase:
I'm a little fuzzy on how you typed this phrase:
Within Resource Monitor, can you tell what process is using the CPU? Is it actually Live, or is it something else? Try sorting on usage so that most-used comes to the top of the list.in live its 10 times bigger than in Resource Monitor
Desktop: Intel i7 hex-core, 64 GB ram, several SSDs, Focusrite Liquid 56, UAD-2.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
Re: Push 2 Live 9.5 cpu sky high
:) when i open task manager and look at cpu uses, then forexample it shows 5 % usage, and in the same time its 50% or more in live...
-
- Posts: 84
- Joined: Sun Jun 15, 2014 1:06 am
Re: Push 2 Live 9.5 cpu sky high
Can you tell us your specs?
Start with CPU, hard drives, memory, and what else is running when you are using Live. We'll see where it goes from there...
Start with CPU, hard drives, memory, and what else is running when you are using Live. We'll see where it goes from there...
Desktop: Intel i7 hex-core, 64 GB ram, several SSDs, Focusrite Liquid 56, UAD-2.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
Re: Push 2 Live 9.5 cpu sky high
Intel(R) Core(TM) i7-4790 CPU 3.60hz. 2tb harddrive, 16gb Ram, win 10 64bit, propellerheads Balance usb audio.Push 2
Push 2 is working, but very slow
with live 9.2 it runs perfectly with those specs mentioned, so i dont think it has nothing to do with the specs
maybe its because live 9.5 with the push 2 has some bugs, its only a week old in public.
and thanks for your help :)
Push 2 is working, but very slow
with live 9.2 it runs perfectly with those specs mentioned, so i dont think it has nothing to do with the specs
maybe its because live 9.5 with the push 2 has some bugs, its only a week old in public.
and thanks for your help :)
Re: Push 2 Live 9.5 cpu sky high
Hi Lovelight,
Please get in touch with support@ableton.com
Please get in touch with support@ableton.com
Ableton Forum Moderator
Re: Push 2 Live 9.5 cpu sky high
Ill do that, and thanks for the inputs.
-
- Posts: 84
- Joined: Sun Jun 15, 2014 1:06 am
Re: Push 2 Live 9.5 cpu sky high
Let us know what you and support find out!
Desktop: Intel i7 hex-core, 64 GB ram, several SSDs, Focusrite Liquid 56, UAD-2.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
Laptop: Alienware Area 51: Intel i9, 32 GB RAM, several more SSDs, UAD Apollo Twin.
Software: Win 10, Cubase, Live+Push2, Maschine, and more.
-
- Posts: 7033
- Joined: Wed Jun 25, 2014 11:34 am
Re: Push 2 Live 9.5 cpu sky high
The percentage in Live is not the total CPU usage as in task manager, but the percentage of the audio processing load as Live sees it. That may sometimes be less than we would like.lovelight wrote::) when i open task manager and look at cpu uses, then forexample it shows 5 % usage, and in the same time its 50% or more in live...
Read more here: Why does Live's CPU meter show a different load than the Activity Monitor/Task Manager? (Ableton Help)
Make some music!