Bass Issue (Ableton 9)
-
- Posts: 6
- Joined: Wed Oct 31, 2018 6:02 pm
Bass Issue (Ableton 9)
Sup pumpkins.
I connect the bass in the scarlet (6i6) and receive not signal in the program.It does show the volume green on the interface but in the program nope.On the preferences i choose the scarlet (6i6) output and input as device and the channel configuration i checked all the options for both in and out.Also on the master channel don't know what to do,cue out and master out are on 1\2.
http://randomhuman0.imgur.com (SCREENSHOTS)
Thanks in advance.
I connect the bass in the scarlet (6i6) and receive not signal in the program.It does show the volume green on the interface but in the program nope.On the preferences i choose the scarlet (6i6) output and input as device and the channel configuration i checked all the options for both in and out.Also on the master channel don't know what to do,cue out and master out are on 1\2.
http://randomhuman0.imgur.com (SCREENSHOTS)
Thanks in advance.
Last edited by amsleepyhead on Fri Nov 02, 2018 10:22 pm, edited 4 times in total.
-
- Posts: 109
- Joined: Mon Feb 26, 2018 11:54 pm
Re: Bass Issue
Do you have the input on the audio track set to 1 and have you record armed the track? Screenshots are useful for problem solving this sort of thing.
Here's a helpful link that still applies to version 10, if you're using that:
https://sonicbloom.net/en/ableton-live- ... ing-audio/
Here's a helpful link that still applies to version 10, if you're using that:
https://sonicbloom.net/en/ableton-live- ... ing-audio/
-
- Posts: 6
- Joined: Wed Oct 31, 2018 6:02 pm
Re: Bass Issue
How i can post a screenshot?The version of ableton is the 9.
-
- Posts: 109
- Joined: Mon Feb 26, 2018 11:54 pm
Re: Bass Issue
You would need to host the screenshot somewhere, like imgur, and use the insert image (Img) button. It's fine that you use Live 9 - that guide was written for 9. I just wanted to point out that the procedures would be the same for 10.amsleepyhead wrote:How i can post a screenshot?The version of ableton is the 9.
-
- Posts: 852
- Joined: Wed Mar 25, 2015 8:45 pm
- Location: Oklahoma City
- Contact:
Re: Bass Issue (Ableton 9)
Oh, in Ableton, make sure the track input is set to "in."
-
- Posts: 6
- Joined: Wed Oct 31, 2018 6:02 pm
Re: Bass Issue
justanametouse wrote:Do you have the input on the audio track set to 1 and have you record armed the track? Screenshots are useful for problem solving this sort of thing.
Here's a helpful link that still applies to version 10, if you're using that:
https://sonicbloom.net/en/ableton-live- ... ing-audio/
I uploaded the in and out configuration plus the preferences and the audio track. https://randomhuman0.imgur.com/all/
-
- Posts: 4500
- Joined: Mon Apr 26, 2010 6:38 am
Re: Bass Issue
amsleepyhead wrote:justanametouse wrote:Do you have the input on the audio track set to 1 and have you record armed the track? Screenshots are useful for problem solving this sort of thing.
Here's a helpful link that still applies to version 10, if you're using that:
https://sonicbloom.net/en/ableton-live- ... ing-audio/
I uploaded the in and out configuration plus the preferences and the audio track. https://randomhuman0.imgur.com/all/
Your image link does not work
-
- Posts: 6
- Joined: Wed Oct 31, 2018 6:02 pm
Re: Bass Issue
Does it work now? https://imgur.com/a/UtzqLBEjestermgee wrote:amsleepyhead wrote:justanametouse wrote:Do you have the input on the audio track set to 1 and have you record armed the track? Screenshots are useful for problem solving this sort of thing.
Here's a helpful link that still applies to version 10, if you're using that:
https://sonicbloom.net/en/ableton-live- ... ing-audio/
I uploaded the in and out configuration plus the preferences and the audio track. https://randomhuman0.imgur.com/all/
Your image link does not work
-
- Posts: 4500
- Joined: Mon Apr 26, 2010 6:38 am
Re: Bass Issue (Ableton 9)
Screen shots work.
I think in you5r output settings you should have the Stereo outputs selected for a start. you have Mono and if you look at your master, you are only sending audio from Master to channel 1 which is just a mono output or "left" if used as a pair.
If you are playing something into your input 1 then Track 1 does seem to be receiving audio from that input. If you switch the Monitor switch to IN can you hear anything?
I think in you5r output settings you should have the Stereo outputs selected for a start. you have Mono and if you look at your master, you are only sending audio from Master to channel 1 which is just a mono output or "left" if used as a pair.
If you are playing something into your input 1 then Track 1 does seem to be receiving audio from that input. If you switch the Monitor switch to IN can you hear anything?
-
- Posts: 6
- Joined: Wed Oct 31, 2018 6:02 pm
Re: Bass Issue (Ableton 9)
I selected the outputs to stereo and the inputs left same as the screenshot.The is no signal.On the scarlett it shows that it receive it cause the knob becames green.On my master what setting i should put?jestermgee wrote:Screen shots work.
I think in you5r output settings you should have the Stereo outputs selected for a start. you have Mono and if you look at your master, you are only sending audio from Master to channel 1 which is just a mono output or "left" if used as a pair.
If you are playing something into your input 1 then Track 1 does seem to be receiving audio from that input. If you switch the Monitor switch to IN can you hear anything?
https://imgur.com/a/R4pB1PR
-
- Posts: 109
- Joined: Mon Feb 26, 2018 11:54 pm
Re: Bass Issue (Ableton 9)
Unless I'm missing something obvious, everything seems ok. Maybe something to do with your interface software (MixControl for Focusrite, I think). Can you get any sound just by listening to the output of the interface or in any other DAW (if you have others)?
-
- Posts: 6
- Joined: Wed Oct 31, 2018 6:02 pm
Re: Bass Issue (Ableton 9)
justanametouse wrote:Unless I'm missing something obvious, everything seems ok. Maybe something to do with your interface software (MixControl for Focusrite, I think). Can you get any sound just by listening to the output of the interface or in any other DAW (if you have others)?
Check the new screenshots when u have time.I have connected my synth with midi (behind the scarlet) and works fine ,it receive the signal.
I also add some focusrite control screenshots.( I dont have my monitors connected cause they are in repair mode to the shop,if this makes any difference that affects the output of the bass) .
http://randomhuman0.imgur.com
By the way i open the focusrite control (u can download it for free from the site) and choose fromanalog line to inst line and the green button in front of the scarlet became green (before it was no light).The solution is near but still the program receive nothing.
As i understand the setting on my ableton are correct (check the screenshots) i think it may have be the focusrite control.
Btw thanks for trying helping me.