Midi Remote Script for 0db
-
- Posts: 1
- Joined: Sun Apr 03, 2016 9:16 am
Midi Remote Script for 0db
Hi guys I have a vcm 600 and really need a script to limit my faders to 0db. I use the remote script in live and have a copy of the decompiled script. Could some one please give me an example of how I should go about writing this script change. I’ve searched the net but can’t find any examples. Thanks
Re: Midi Remote Script for 0db
I use a korg nanokontrol and scaled the MIDI-data output from the usual range of 0-127 to 0-108. This results at 0dB at the end value 108.
If you can somehow access your controller-output, this would be the easiest solution.
Cheers
Martin
If you can somehow access your controller-output, this would be the easiest solution.
Cheers
Martin
Re: Midi Remote Script for 0db
If you can't find a better way... the cheapskate way is to throw a utility on the track set to -6db
and then you can slam your faders to the top without clipping everything..
and then you can slam your faders to the top without clipping everything..