Hi,
I am currently setting up a podcast recording using Ableton (and a Rode Caster Pro board).
I have 2 microphones which I want to record at the same time, but have their audio separate from each other in the tacks.
I have put both the audio tracks as Input External, one as 1 and the other as 2, so they should be coming from the two different mics right?
I then am simultaneously arming both tracks so they're recording at once. However, when I speak into one microphone it just shows up in both tracks. I want the audio from one microphone to show up in one track, completely separate from the other microphone's audio recording into the other track. At the moment they are just combined.
Is this possible? If so, please tell me how I can do it, as I'm very new to this!
Thank you stacks!
How!? Record two audio inputs at the same time, but have their audio separate?
-
- Posts: 1
- Joined: Wed Mar 06, 2019 3:15 am
Re: How!? Record two audio inputs at the same time, but have their audio separate?
RØDECaster ProAnd with the new 1.1.0 software version available in February 2019, you will also be able to record in multi-channel mode, allowing you to separately record each of the sources to its own track for later post-production.
I gather from their download page, that the companion app needs to be upgraded as well.
If you haven't done the upgrades, I assume your Rodecaster is just sending the stereo sum via USB.
A workaround prior to updating could be panning mic 1 hard left, mic 2 hard right ON THE RODECASTER.
Last edited by chrk on Wed Mar 06, 2019 7:31 am, edited 2 times in total.
-
- Posts: 10586
- Joined: Sat Jan 17, 2009 5:57 pm
- Contact:
Re: How!? Record two audio inputs at the same time, but have their audio separate?
EDIT: Looks like chrk has read up a bit on the hardware and that my suggestion probably won't work based on his response....
I came for the
But stayed for the
But stayed for the
Re: How!? Record two audio inputs at the same time, but have their audio separate?
1) . Follow instructions here for setting up aggregate device: https://www.youtube.com/watch?v=4QXyvPLCz58&t=842s
2) . In audio midi set-up, make sure both mics are set to same input levels (when I plugged both my yetis into my mac, one of them had input levels too low to pick up sound)
3) . In ableton, open preferences, audio input device = aggregate device.
4) . Click "input config" and make sure you've selected 1(mono) & 2(mono) as well as 3(mono) &4(mono).
5) . For your two audio tracks, click the drop-down menu for channel, and put one audio channel on "1" and select the other audio channel and put it on "3." This should enable recording from two separate USB mics.
my podcast: https://podcasts.apple.com/us/podcast/g ... d755649884
youtube: https://www.youtube.com/user/CoachingNick
2) . In audio midi set-up, make sure both mics are set to same input levels (when I plugged both my yetis into my mac, one of them had input levels too low to pick up sound)
3) . In ableton, open preferences, audio input device = aggregate device.
4) . Click "input config" and make sure you've selected 1(mono) & 2(mono) as well as 3(mono) &4(mono).
5) . For your two audio tracks, click the drop-down menu for channel, and put one audio channel on "1" and select the other audio channel and put it on "3." This should enable recording from two separate USB mics.
my podcast: https://podcasts.apple.com/us/podcast/g ... d755649884
youtube: https://www.youtube.com/user/CoachingNick
Re: How!? Record two audio inputs at the same time, but have their audio separate?
If both microphones can pick up your voice then your voice will show up on both their channels. This is called “cross-talk” or “spill”.
The way to avoid, or at least minimise, it is to make sure each mic can only pick up what you want it to, or only pick up the unwanted signal at a level that is so low it can be ignored when the “correct” signal is present and removed by editing the audio clips or maybe using a noise gate when the “correct” signal isn’t present.
Using directional mics can make a big difference if the least sensitive pickup area of each mic is towards the sound-source you don’t want it to pick up.
If the signal is present on both mics and there’s no easy way round it (e.g. a mic on an acoustic guitar and a mic for the guitarist’s voice or when recording a drum kit) it’s necessary to be careful about the phase of the audio when recorded to prevent them cancelling each other out.
The ideal solution, if possible, is to use only one mic at a time.
The way to avoid, or at least minimise, it is to make sure each mic can only pick up what you want it to, or only pick up the unwanted signal at a level that is so low it can be ignored when the “correct” signal is present and removed by editing the audio clips or maybe using a noise gate when the “correct” signal isn’t present.
Using directional mics can make a big difference if the least sensitive pickup area of each mic is towards the sound-source you don’t want it to pick up.
If the signal is present on both mics and there’s no easy way round it (e.g. a mic on an acoustic guitar and a mic for the guitarist’s voice or when recording a drum kit) it’s necessary to be careful about the phase of the audio when recorded to prevent them cancelling each other out.
The ideal solution, if possible, is to use only one mic at a time.
Live 10 Suite, 2020 27" iMac, 3.6 GHz i9, MacOS Catalina, RME UFX, assorted synths, guitars and stuff.
-
- Posts: 902
- Joined: Sat Dec 30, 2017 3:36 am
Re: How!? Record two audio inputs at the same time, but have their audio separate?
You want mics with cardioid patterns, facing in different directions. If the level is significantly lower, you can then use a gate to control the crosstalk. This is assuming you don't somehow have the mics routed to both inputs. If your audio interface has mixing software, check there to make sure you aren't outputting both each mic to both sides of a stereo output.