spilling wine on my push
-
- Posts: 4598
- Joined: Fri Dec 28, 2007 9:42 am
- Location: Hoerikwaggo's sunset side...
- Contact:
spilling wine on my push
So I have a rule of no beverages near my music equipment
A rule which I break.
yesterday I (1) switched the desk light off first as I was packing up and then (2) in the resulting dark knocked over a wine glass standing right above my push.
A chardonnay that tasted like rat's piss, actually.
Panic stations. I shook all the wine out of the instrument and then balanced it upside down on some books for the night.
This morning it was still working, thankfully.
But I am wondering about the dangers of long term corrosion
Should I be?
I will take it to a technician, but i wondered whether anyone had advice.
Or just scorn and recriminations to heap on my head.
A rule which I break.
yesterday I (1) switched the desk light off first as I was packing up and then (2) in the resulting dark knocked over a wine glass standing right above my push.
A chardonnay that tasted like rat's piss, actually.
Panic stations. I shook all the wine out of the instrument and then balanced it upside down on some books for the night.
This morning it was still working, thankfully.
But I am wondering about the dangers of long term corrosion
Should I be?
I will take it to a technician, but i wondered whether anyone had advice.
Or just scorn and recriminations to heap on my head.
Re: spilling wine on my push
That was bold turning it on again just a day later! I'd have left if a few days, liquid evaporates more slowly in enclosed units.
FYI this is what a push2 looks like on the inside
https://www.youtube.com/watch?v=YItWQdJgXLs
The main matrix is handily covered by one big rubber sheet. The side button elements are sealed units, which is handy for wine-proofing. My personal worry would be the encoders, so it depends where on the unit you splashed it.
Wine is sugary and will turn toward the acidic as it oxidises, which isn't that great for delicate components - including that magic rubber sheet..
In the past I spent about 15 years draining idiot punters drinks out of my gear and most of it still works fine, so you are probably OK. But it might be worth popping it open and taking a look for any bad signs (and to make sure its completely dry in there). Opening gear and cleaning it is usually pretty simple, especially with youtube to guide you. So if you feel like getting intimate with your push you could pop it open and take a look around to set your mind at rest.
In fact right this minute I'm cleaning inside my ancient MS20, which was drowned in beer several times and lived in a haze of oily smokemachine fluid.
Still works
FYI this is what a push2 looks like on the inside
https://www.youtube.com/watch?v=YItWQdJgXLs
The main matrix is handily covered by one big rubber sheet. The side button elements are sealed units, which is handy for wine-proofing. My personal worry would be the encoders, so it depends where on the unit you splashed it.
Wine is sugary and will turn toward the acidic as it oxidises, which isn't that great for delicate components - including that magic rubber sheet..
In the past I spent about 15 years draining idiot punters drinks out of my gear and most of it still works fine, so you are probably OK. But it might be worth popping it open and taking a look for any bad signs (and to make sure its completely dry in there). Opening gear and cleaning it is usually pretty simple, especially with youtube to guide you. So if you feel like getting intimate with your push you could pop it open and take a look around to set your mind at rest.
In fact right this minute I'm cleaning inside my ancient MS20, which was drowned in beer several times and lived in a haze of oily smokemachine fluid.
Still works
Re: spilling wine on my push
I had water spilled on mine. I left it off for a few days. It is still working fine.re:dream wrote:So I have a rule of no beverages near my music equipment
A rule which I break.
yesterday I (1) switched the desk light off first as I was packing up and then (2) in the resulting dark knocked over a wine glass standing right above my push.
A chardonnay that tasted like rat's piss, actually.
Panic stations. I shook all the wine out of the instrument and then balanced it upside down on some books for the night.
This morning it was still working, thankfully.
But I am wondering about the dangers of long term corrosion
Should I be?
I will take it to a technician, but i wondered whether anyone had advice.
Or just scorn and recriminations to heap on my head.
Re: spilling wine on my push
I would definitely be opening mine up to clean it out, or taking it to someone who could. Especially with red wine. The video Angstrom linked you to shows how it's done, easy enough aside from removing the rubber feet.
tarekith
https://tarekith.com
https://tarekith.com
Re: spilling wine on my push
No scorn yet for your silliness? Wow, sympathetic lot here.
...not having a mid-life crisis....just don't give a fuck about shit i don't give a fuck about anymore.....
Re: spilling wine on my push
Hi Guys, Long time no see
If you're worried about corrosion from the grapes (alcohol will evaporate) I would suggest opening it up.
You can use a small stiff brush and isopropyl alcohol to scrub any place where you see the wine has reached.
Order some KimWipes http://a.co/9Gs487h and you can use them to soak up any debris while you scrub through the KimWipe with alcohol and a small brush. This is what I use to clean circuit boards at work and have used in the past at the music repair shop with everything from beer to cat urine. Once it's all cleaned up you won't have to worry about any issues down the road.
Just remember never to force anything when disassembling. If it doesn't come apart fairly easy then you are probably missed a screw or a clip. Take your time and move slowly while you disassemble and reassemble, I suggest using an ice cube tray to hold various screws.
If you're worried about corrosion from the grapes (alcohol will evaporate) I would suggest opening it up.
You can use a small stiff brush and isopropyl alcohol to scrub any place where you see the wine has reached.
Order some KimWipes http://a.co/9Gs487h and you can use them to soak up any debris while you scrub through the KimWipe with alcohol and a small brush. This is what I use to clean circuit boards at work and have used in the past at the music repair shop with everything from beer to cat urine. Once it's all cleaned up you won't have to worry about any issues down the road.
Just remember never to force anything when disassembling. If it doesn't come apart fairly easy then you are probably missed a screw or a clip. Take your time and move slowly while you disassemble and reassemble, I suggest using an ice cube tray to hold various screws.
Ableton Live 10 Suite / Push 2 / Max 8 /
-
- Posts: 113
- Joined: Wed Jul 04, 2012 8:29 pm
- Location: Manila, Philippines
Re: spilling wine on my push
I have a 3 year old Push 1 that's starting to be sticky all over the place except the buttons, pads and knobs. Anyone else experiencing this? Also, would you go about cleaning it similarly as stated above? With isoprophl alcohol? Thanks.
Bryan Dumaguina
https://soundcloud.com/bryan-dumaguina
https://soundcloud.com/bryan-dumaguina
Re: spilling wine on my push
it's a proven fact that wine spills more easily than any other alcoholic beverage
Re: spilling wine on my push
I had the same problem , I have tried to clean it with various cleaners and just gave up . Last night I spilled a glass of water and bicarbonate soda all over it. I will leave it a few days to dry out . A new push 2 is too pricey for me.Bdumaguina wrote: ↑Mon Dec 18, 2017 2:08 pmI have a 3 year old Push 1 that's starting to be sticky all over the place except the buttons, pads and knobs. Anyone else experiencing this? Also, would you go about cleaning it similarly as stated above? With isoprophl alcohol? Thanks.
-
- Posts: 4500
- Joined: Mon Apr 26, 2010 6:38 am
Re: spilling wine on my push
Get a screw driver and learn how to disassemble and clean it. With an hour of work you could have it all cleaned up and working like new again, it's not that hard. A skill worth learning if you are going to drink around your gear with butter fingers.
Re: spilling wine on my push
Learned that lesson years ago, never have drinks around gear - just put it on the floor.
Re: spilling wine on my push
Hard to reach the knobs down by your feet though
tarekith
https://tarekith.com
https://tarekith.com