hambone1 wrote:Make a new clip in a MIDI track. Make sure it's routed correctly to your synth.
In the Notes section, set your desired bank, sub-bank, and program.
Launch the clip. It will choose the appropriate patch on your synth for you.
Just done it. It ignores Bank Select Messages. Are you using a Roland or other gear ?
I think it's because of the message structures in my Roland JV1010 gear:
Bank Select (Controller number 0,32)
status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n=MIDI channel number : 0H - FH (ch.1 - ch.16)
mm,ll=Bank number : 00 00H - 7F 7FH (bank.1 - bank.16384)
* Not received when the Receive Program Change or Receive Bank Select is OFF.
* Not received in GM mode.
* The Patches corresponding to each Bank Select are as follows.
Bank Select | Program No | Group Patch No.
MSB | LSB | |
------+-----+------------+----------------------------------------
80 | 0 | 0 - 127 | User 1 - 128
81 | 0 | 0 - 127 | PR-A 1 - 128
81 | 1 | 0 - 127 | PR-B 1 - 128
81 | 2 | 0 - 127 | PR-C 1 - 128
81 | 3 | 0 - 127 | GM 1 - 128
81 | 4 | 0 - 127 | PR-E 1 - 128
84 | 0 | 0 - 127 | XP-A (Session) 1 - 128
84 | 1 | 0 - 126 | XP-A 129 - 255
84 | 2 | 0 - 127 | XP-B 1 - 128
84 | 3 | 0 - 126 | XP-B 129 - 255
In the clip I got Bank,SubBank,Program if I want a GM nylon guitar I will select Bank 81, SubBank 3, Program 25. This is not working.
If I put the module in GM Mode (via hardware knob) what I obtain is that I can select any of the 128 presets within the GM Bank. This corresponds to what it's said above, because during Hardware GM Mode Bank Select messages are ignored.
Strange to say, this happens even when any other bank is hardware selected and I am in Performance mode.If I Hardware select the PR-C Bank I have chance to change all 128 programs in that Bank.
Simply Bank Messages seems to be ignored. Last but not least some banks have a subbank number of 0 which is not possible to select.
Sorry to going into the details but I'm really desperate!
Any suggestion is welcomed! BTW this module works easily with CubaseSx.
