Hi,
I have my 2 laptops synchronized via Midi. The Master controls the Slave perfectly. But, I would like to be able to use my midi controller that is connected to the Master to also control the Slave.
I have been trying to find a way to map the Master's controller to the Slave but I'm not having any luck. I have tried turning on the Track, Sync and Remote on the Midi Input device on the Slave. I then highlight the Midi Map mode and start pressing buttons on the controller connected to the Master. Still no luck.
I have the Sync, Remote and Track enabled on the Midi output of the Master. I have tried turning them off as well but that doesn't seem to help either. Every once in a while I get a button to map to the slave but it seems random and I cannot duplicate it every time.
Help? Anyone?
2 laptops, 1 controller
Here is a guess: try using shorter MIDI cables.
From MIDI box to MIDI box is one length of cable, from controller to Master MIDI box is another. If, in your case, the sum of those is getting close to 20 feet, then that may be the problem.
From MIDI box to MIDI box is one length of cable, from controller to Master MIDI box is another. If, in your case, the sum of those is getting close to 20 feet, then that may be the problem.
UTENZIL @Utenzilolnia]+Website]+Soundcloud Sonicity]+Twitter Inanity]+Everywhere a tool... of the muse.
Thank you very much for taking the time to respond to my question. I tried using a shorter Midi Cable (6') but that didn't seem to help. I tried routing the Midi Cable through different Midi Ports as well: sound card, different controllers, Midi to USB box. Still no luck.
Thanks again for the advice, any other suggestions?
Thanks again for the advice, any other suggestions?
-
- Posts: 1936
- Joined: Wed Sep 19, 2007 8:34 am
- Location: Austin, Texas
- Contact:
-
- Posts: 146
- Joined: Thu Feb 12, 2009 7:34 pm
Re: 2 laptops, 1 controller
this topic sounded dirty.