[amo] reverb affects sound in track even if switched off
[amo] reverb affects sound in track even if switched off
hi
Today I added reverb preset Ballad on a track - it affects the start of a break down in the track and then half way through the breakdown, the device is switched off via automation envelopes in the arrangement view, as are the dry/wet and delay on the reverb.
However when playback comes back into the main part of the track the sound in track is affected.
If i start playing the track at a point after the reverb was activated and switched off in the automation envelopes then the sound stays as it was before the reverb was added to the device chain.
Removing the reverb from the device chain returns the track to normal
Today I added reverb preset Ballad on a track - it affects the start of a break down in the track and then half way through the breakdown, the device is switched off via automation envelopes in the arrangement view, as are the dry/wet and delay on the reverb.
However when playback comes back into the main part of the track the sound in track is affected.
If i start playing the track at a point after the reverb was activated and switched off in the automation envelopes then the sound stays as it was before the reverb was added to the device chain.
Removing the reverb from the device chain returns the track to normal
https://hiddensound.net/
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
Re: (b 023) reverb affects sound in track even if switched off
Is the red button with the horizontal lines to the right of the OVR button visible? Sometimes the session view gets out of sync with the arrangement view. You might already know that and therefore my suggestion is useless, but I have been using Live for at least a couple of years and that still throws me. Press the red button to return to the arrangement. Sorry if this was useless to you.buzby wrote:hi
Today I added reverb preset Ballad on a track - it affects the start of a break down in the track and then half way through the breakdown, the device is switched off via automation envelopes in the arrangement view, as are the dry/wet and delay on the reverb.
However when playback comes back into the main part of the track the sound in track is affected.
If i start playing the track at a point after the reverb was activated and switched off in the automation envelopes then the sound stays as it was before the reverb was added to the device chain.
Removing the reverb from the device chain returns the track to normal
Edit: I see your post count and join date and realize that you almost assuredly know of what I am talking about.
https://www.youtube.com/channel/UCaipei ... -DzwY661Fg I write silly songs
Re: (b 023) reverb affects sound in track even if switched off
hi man
thanks for the reply - the red button is pressed
something that i didnt mention was that the way that the rest of the track is affected is not with a reverb sound but it sounds like i have done a really bad eq on it
like i said, the problem goes when i remove the reverb from the track and i ve checked all the other automation lanes on the track
thanks for the reply - the red button is pressed
something that i didnt mention was that the way that the rest of the track is affected is not with a reverb sound but it sounds like i have done a really bad eq on it
like i said, the problem goes when i remove the reverb from the track and i ve checked all the other automation lanes on the track
https://hiddensound.net/
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
Re: (b 023) reverb affects sound in track even if switched off
Hello,
Is it possible for you to upload a simple set that demonstrates the problem, and send a link to beta@ableton.com, with a reference to this thread?
Regards,
Amaury
Is it possible for you to upload a simple set that demonstrates the problem, and send a link to beta@ableton.com, with a reference to this thread?
Regards,
Amaury
Ableton Product Team
Re: [amo] reverb affects sound in track even if switched off
hi Am
i sent a snapshot a couple of days ago - is that enough or do you want to upload the set as a self contained set or something else ?
cheers
i sent a snapshot a couple of days ago - is that enough or do you want to upload the set as a self contained set or something else ?
cheers
https://hiddensound.net/
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
Re: [amo] reverb affects sound in track even if switched off
Hi,buzby wrote:hi Am
i sent a snapshot a couple of days ago - is that enough or do you want to upload the set as a self contained set or something else ?
cheers
I thought I sent you the answer by email but here it is: yes please, send a self contained set, please try to reduce it to 1 track only, make it as small as possible to observe the problem.
Regards,
Amaury
Ableton Product Team
Re: [amo] reverb affects sound in track even if switched off
hi man
i posted the comment before seeing the email - will send it tonight
cheers
i posted the comment before seeing the email - will send it tonight
cheers
https://hiddensound.net/
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
Re: [amo] reverb affects sound in track even if switched off
dude
opened it in b25 and its ok .... !!!!
opened it in b25 and its ok .... !!!!
https://hiddensound.net/
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
https://linktr.ee/hiddensound
Sound Devices mix pre 3 and 10Tii, various Sennheiser mkh, dpa, LOM, Audio Technica microphones
Re: [amo] reverb affects sound in track even if switched off
Very good. Bugs that get fixed by themselves
Seriously, it's possible that your problem was a side-effect of something else. I moved the thread. If you get the problem again, send me the set.
Regards,
Amaury
Seriously, it's possible that your problem was a side-effect of something else. I moved the thread. If you get the problem again, send me the set.
Regards,
Amaury
Ableton Product Team