anyone got the lower row buttons 1-8 successfully working? for solo for example?neomad wrote:Works OK thank you !
I'll try to program encoders to control PAN and low button as SOLO
I'll keep you posted
UserConfiguration text file for KorgNanokontrol
Re: UserConfiguration text file for KorgNanokontrol
***
GAFM ***
![Image](http://i55.photobucket.com/albums/g158/SubFunk/logos-pics/catrax_email_logo.jpg)
-
- Posts: 61
- Joined: Thu Jan 22, 2009 8:43 pm
Re: UserConfiguration text file for KorgNanokontrol
i got this working....but:it seems to skip a bankI'm at the wtf stage with banks in Live, can't figure out if I don't understand the concept or if I don't notice the profound change that occurs when I shift up a bank.
an easy way to check this is with the impulse-device
turn knob 1...it controls startpoint of pad1(like it should)
but if i press bank up....then knob1 controls start of pad3
press up again and it goes to pad5
i press bank-down....then it also skips(ie:goes from 3 to 1)
on other devices it skips a bank too
so anyone got the bankswitch function working properly?
would be nice if it isnt a bug and i just need to adjust some setting i forgot
cheers
seis.
ps forgot to mention:theres a list in the live-lessons of all the banks of instantcontrol-assignments of all live-devices
-
- Posts: 61
- Joined: Thu Jan 22, 2009 8:43 pm
Re: UserConfiguration text file for KorgNanokontrol
ok ,after a few hours of testing..
(i must have tried any cc value option there was)
i found out how to switch to all 8 banks with my nanokontrol
you have to press bank down and hold it then press bank up...then it will switch from bank1 to bank2
and you can switch from bank 8 to 7 by: pressing and holding bank up and then also pressing bank down
(oddly enough you cant go from say bank 4 to 5 by pressing up/down.. ..it only works when switching from bank1 to bank2.....or when switching from bank8 to bank7
to summarise:lets say i just selected operator and i wanted to use bank6(one would assume pressing up 5 times)
(and i have no idea what the bank6 instantmappings are for operator,but you can look it up in the live-lessons)
so to switch from bank1 to bank6:you hold bank-down,then press bank-up also,and then(after releasing both)you press up 2 more times,and you can control the parameters in bank6
confusing yes,but it does let you get from bank1 to bank6 in four button presses![Smile :)](./images/smilies/icon_smile.gif)
hope this helps anyone
seis.
(i must have tried any cc value option there was)
i found out how to switch to all 8 banks with my nanokontrol
you have to press bank down and hold it then press bank up...then it will switch from bank1 to bank2
and you can switch from bank 8 to 7 by: pressing and holding bank up and then also pressing bank down
(oddly enough you cant go from say bank 4 to 5 by pressing up/down.. ..it only works when switching from bank1 to bank2.....or when switching from bank8 to bank7
to summarise:lets say i just selected operator and i wanted to use bank6(one would assume pressing up 5 times)
(and i have no idea what the bank6 instantmappings are for operator,but you can look it up in the live-lessons)
so to switch from bank1 to bank6:you hold bank-down,then press bank-up also,and then(after releasing both)you press up 2 more times,and you can control the parameters in bank6
confusing yes,but it does let you get from bank1 to bank6 in four button presses
![Smile :)](./images/smilies/icon_smile.gif)
hope this helps anyone
seis.
Re: UserConfiguration text file for KorgNanokontrol
Thanks - it worked nicely.
..... . . . . . . . . .