Cracks & pops when starting or stopping playback

UHE is now closed. For Technical Support from Ableton, please go here: http://www.ableton.com/support
copong
Posts: 62
Joined: Tue May 05, 2009 4:33 pm

Re: Cracks & pops when starting or stopping playback

Post by copong » Mon May 24, 2010 9:01 pm

As promised, a video recording:

http://www.youtube.com/watch?v=0iE1CC-dmZo

sorry about the quality, had to record with the phone.

sporkles
Posts: 3236
Joined: Sun Feb 18, 2007 8:43 pm
Location: Schmocation

Re: Cracks & pops when starting or stopping playback

Post by sporkles » Wed May 26, 2010 8:47 am

Yup; that's exactly what's going on for me as well. Has anyone heard back from Ableton on this?

copong
Posts: 62
Joined: Tue May 05, 2009 4:33 pm

Re: Cracks & pops when starting or stopping playback

Post by copong » Wed May 26, 2010 9:32 am

Not me, no. I have "Case ableton393572" assigned to this but no response yet.

Dead0k
Posts: 11
Joined: Wed May 26, 2010 3:57 pm

Re: Cracks & pops when starting or stopping playback

Post by Dead0k » Wed May 26, 2010 4:31 pm

copong wrote:As promised, a video recording:

http://www.youtube.com/watch?v=0iE1CC-dmZo

sorry about the quality, had to record with the phone.

on a latest demo version i have absolutely the same

i guess you have to reply to developers with Case ableton393572 topic to increase the bug fix.. or explanation answer

stockylocky
Posts: 102
Joined: Mon Jan 14, 2008 7:30 pm

Re: Cracks & pops when starting or stopping playback

Post by stockylocky » Mon May 31, 2010 12:36 pm

Pleas keep this thread going, its the only way we will get an answer. It was clear that abes didnt have a clue bout it when I was dealing with them ages ago.... I hope they have found something out by now????

copong
Posts: 62
Joined: Tue May 05, 2009 4:33 pm

Re: Cracks & pops when starting or stopping playback

Post by copong » Tue Jun 01, 2010 8:39 am

Just replied the support email with a link to this thread and others reporting the same issue; hopefully the amount of people experiencing this will get their attention.

djgbrown
Posts: 3
Joined: Thu Oct 29, 2009 3:21 am

Re: Cracks & pops when starting or stopping playback

Post by djgbrown » Wed Jun 02, 2010 12:21 am

I've been experiencing the same problem too. It wasn't so bad when I had first started my latest track, but as I got closer to finishing it up, the clicks/pops/buzzing became unbearable. Every time I start/stop or click the mouse within the tracks in the arrangement view. And let's not forget the CPU spikes either.

I can't believe Ableton isn't addressing this issue. It's been happening to me for a good month or so.

Btw, I'm running Live 8.1.3, on a Mac Pro 2x2.66 ghz Intel dual-core processor... 8 gb of Ram. And just like you guys, I've emailed support with my issue, and I haven't heard back yet. Hopefully they'll be quicker than last time, because last time I had an issue (about 6 months ago), it took them 3 weeks to respond (unacceptable).

Bong Bong...

dialog
Posts: 2
Joined: Fri Feb 26, 2010 12:01 am

Re: Cracks & pops when starting or stopping playback

Post by dialog » Wed Jun 02, 2010 1:32 pm

I seem to be getting a lot of audio glitching also.

I had to give up on my last track & bounce the parts down to finish in cubase.
Ran the same loops with no problems.

Icct_Hedral
Posts: 17
Joined: Sat Dec 27, 2008 4:21 am
Location: Connecticut

Re: Cracks & pops when starting or stopping playback

Post by Icct_Hedral » Mon Jun 07, 2010 7:34 pm

I'm having the same exact issue - massive CPU spikes registering around 300% on the CPU load, and near 100% on my Mac OS 10.6.3 Activity monitor.

The worst part is, this is happening with TWO audio tracks, and one filter delay return. One audio track is a two bar loop with a lot of tone warping (it's dialogue that's been rephrased into a rhythm), and a simple drum loop that's warped to tempo. Easy stuff.

But I'm getting spikes and dropouts just like the video posted earlier.

One other factor that is relatively new for me, is the use of an external USB hard drive for sample playback, with the intention of giving my system a break from handling everything at once. Though this hasn't affected me until now...

Icct_Hedral
Posts: 17
Joined: Sat Dec 27, 2008 4:21 am
Location: Connecticut

Possible solution

Post by Icct_Hedral » Mon Jun 07, 2010 7:44 pm

OK - Please check this out, as it's worked for me, so far...

I noticed this problem first appeared after mucking around with some Max/MSP MIDI crosstalk. I employed the IAC Bus in Mac OS X (whatever Windows equivalent there is, I would wager it's having a similar effect), later opting to use M4L to make the whole process streamlined.

Having enabled the IAC Bus for MIDI input and output in Live's MIDI preferences (as well as a control surface), I never bothered to disable it. This is when the spikes started...

I just turned off the output driver and control surface configuration, and I haven't had a single CPU spike nor any activity above 5%...

Hope this helps until Ableton can address the issue...

copong
Posts: 62
Joined: Tue May 05, 2009 4:33 pm

Re: Cracks & pops when starting or stopping playback

Post by copong » Mon Jun 07, 2010 7:58 pm

Hope Mac users are alleviated by that, unfortunately no IAC in windows so that can't be the issue for us :/

I'm in talks with a support technician, the problem is that I'm on a very tight deadline and can't spare much time for stress tests and whatnot :/

Icct_Hedral
Posts: 17
Joined: Sat Dec 27, 2008 4:21 am
Location: Connecticut

Re: Cracks & pops when starting or stopping playback

Post by Icct_Hedral » Mon Jun 07, 2010 8:24 pm

Ah, yes - I hope you a speedy recovery nonetheless!

Have you tried disabling any extraneous MIDI drivers that may be present?

I'm sure you've tried everything though at this point...

Good luck.

sporkles
Posts: 3236
Joined: Sun Feb 18, 2007 8:43 pm
Location: Schmocation

Re: Cracks & pops when starting or stopping playback

Post by sporkles » Wed Jul 07, 2010 5:40 pm

It's the exact same in 8.1.4 :evil:

Dead0k
Posts: 11
Joined: Wed May 26, 2010 3:57 pm

Re: Cracks & pops when starting or stopping playback

Post by Dead0k » Sun Aug 29, 2010 1:29 pm

still no fixes? :oops: sad http://www.youtube.com/watch?v=0iE1CC-dmZo

sad that ableton's team careless about such glitches

copong
Posts: 62
Joined: Tue May 05, 2009 4:33 pm

Re: Cracks & pops when starting or stopping playback

Post by copong » Tue Sep 21, 2010 11:08 am

Been out of the game for some time travelling around.

Was this ever fixed at all?

Locked