Ableton Forum

snappyass wrote:still get a bit of that here too i've managed to now implement a few extra things. such as melodic step sequence, 32 pad drum rack and note mode. do me a favor and give it a go...
push legacy and APC phaze folders. just drop them in midi scripts..
https://www.dropbox.com/sh/lm84txfm4aiu ... rcC6a?dl=0

select APC PHAZE as control surface
select apc40MK2 as in and out. load new set, toggle between 'PAN' and 'USER' a couple of times (still working on this)
when in drum or note mode (depending what is on the midi track) press user again to switch between 32 drum/melodic sequence.
hold and release 'BANK' to toggle note repeat. 'stop' buttons change amount of repeat.

Cool) I'll check now, thank you very much!

Working?

snappyass wrote:Working?

Hello, sorry for my english, I use Google translator.

Excellent work, sequencer is good, the only thing I do not understand is what do the orange blocks on the matrix answer at the top from the fifth to the sixth channel?

Tested: I noticed a couple of things.

1) When the sequencer is operated, if the "BANK" button is pressed, in the "PAN" mode, clips can not be turned off while repeating the sequencer notes in the active mode.
 
2) In "NOTE MODE" mode, as I understood you, you realized switching octaves with the "BANK SELECT" arrows, if you switch to an octave down, then on 1 channel, 4 clip instead of playing notes, turn MUTE on or off 6 channel )))

3) Do not know how to describe it so watch the video here https://www.dropbox.com/s/rvaxhyovemmdu ... h.mp4?dl=0

Thanks. the English is fine and thanks for the video

I will try and work on these over the weekend.

snappyass wrote:Thanks. the English is fine and thanks for the video

I will try and work on these over the weekend.

Hi man) Is there a progress in the script? I'm ready to test))))

Hi there and sorry for my bad english !

I had a blast playing with the sequencer this night and I would like to thank you for your hard work on this, I'm impressed by the result so far.

I have 3 questions though :
1 - In drum sequencer mode : is it possible to select drums on the left part without hearing it, for exemple by maintaining Shift+pad ? (Also when recording, it's impossible to select the drum, mouse needed)
2 - Is it possible to lock the APC to a track with your script ? I also use a Novation Sl25 and I would like the APC to be dedicated for drums and clip launching.
3 - Is there a way to support you without coding knowledges ?

Hi.
Sorry i've been quite busy. i will try to get back on this asap.
Pabonlo. Holding metronome whilst pressing a drum pad will select without playing

snappyass wrote: Pabonlo. Holding metronome whilst pressing a drum pad will select without playing

It works like a charm !
Thanks again

hi again apc lovers!
I like to see that we are still working to improve the apk 40 mk2 script, I started installing APC_PHAZE but it does not load well ..
I have the version of ableton live 9.6 and the apc _lew worked great, some idea? im mac user ..
I installed it as usual and it does not work =(

fishybones wrote:hi again apc lovers!
I like to see that we are still working to improve the apk 40 mk2 script, I started installing APC_PHAZE but it does not load well ..
I have the version of ableton live 9.6 and the apc _lew worked great, some idea? im mac user ..
I installed it as usual and it does not work =(

Have you installed both scripts?
phaze and legacy.

snappyass wrote:

fishybones wrote:hi again apc lovers!
I like to see that we are still working to improve the apk 40 mk2 script, I started installing APC_PHAZE but it does not load well ..
I have the version of ableton live 9.6 and the apc _lew worked great, some idea? im mac user ..
I installed it as usual and it does not work =(

Have you installed both scripts?
phaze and legacy.

Yup, i have nanokontrol2, legacy, phaze and sequencer_lew. on 9.6
I tried version 9.7.4 and it works, but for example I could not stop the clips and some buttons not working.

fishybones wrote:

snappyass wrote:

fishybones wrote:hi again apc lovers!
I like to see that we are still working to improve the apk 40 mk2 script, I started installing APC_PHAZE but it does not load well ..
I have the version of ableton live 9.6 and the apc _lew worked great, some idea? im mac user ..
I installed it as usual and it does not work =(

Have you installed both scripts?
phaze and legacy.

Yup, i have nanokontrol2, legacy, phaze and sequencer_lew. on 9.6
I tried version 9.7.4 and it works, but for example I could not stop the clips and some buttons not working.

Oh good so its working to the point i have taken it to.
There are a number of issues i'm still trying to work out. the stop buttons seem to work sometimes and othertimes do not so they don't throw up any errors in the log.
I will need to sit and go through the script in its entirety to fix this so it will take some time.

If there is anybody else that could maybe help with this it would be appreciated. As i have stated before. I am no python expert

Hey man, is there any progress?)))

Hello guys, can you please help me?
I have a quite a hard time to set up my APC40mk2 with my Ableton 10.
I tried those manuscripts you mentioned above but none of them are working.
Also tried other from the internet.
None of them are working.
As soon as I copy those scripts in my Ableton folder it still....

Can someone help please?

Edit: Still investigating the code