YEAHsyncr wrote:Ok. Actually it's only good news. Turns out I didn't have a few things engaged in Sampler (so for example only 2 settings showed up in Pitch to begin).
However, turning up the LFOs, Filter, Shaper options and all 8 banks have 8 settings filling up the screen....Woot. Very nice.
So the only thing I needed to change was the spacing and it is good to go.
No I don't see how that is posible, if you look at the code we are changing, there are only banks, parameter names and bank names.Valiumdupeuple wrote:That's exiting!
Out of curiosity, can we limit ranges of parameters within the script ?
Code: Select all
ARP_BANK1 = ('Style', 'Groove', 'Offset', ''Hold On'', '', '', '', '')
ARP_BANK2 = ('Sync On', 'Free Rate', 'Synced Rate', 'Gate', 'Retrigger Mode', 'Ret. Interval', 'Repeats', '')
ARP_BANK3 = ('Tranpose Mode', 'Tranpose Key', 'Transp. Steps', 'Transp. Dist.', 'Velocity Decay', 'Velocity Target', 'Velocity On', 'Vel. Retrigger')
ARP_BOB = ('Sync On', 'Free Rate', 'Synced Rate', 'Gate', 'Groove', 'Transp. Steps', 'Transp. Dist.', 'Velocity Decay')
ARP_BANKS = (ARP_BANK1, ARP_BANK2, ARP_BANK3)
ARP_BOBS = (ARP_BOB,)
ARP_BNK_NAMES = ('Style', 'Rate/Retrigger', 'Transpose/Velocity')The file you have in your own directory is compiled, that's why it does not look like my file (because that is the same file de-compiled)tedlogan wrote:I was going to try your devices.py file, but when I checked my file - it looked absolutely nothing like the one you posted.Of course yours is modified a lot, but mine doesn't even bear any resemblance to it. I also have 3 different ones in 3 directories - one for live 9 suite, one for live 9 beta, and one in live 9 beta_update.
That's the oneSo not sure which ones to really replace. Obviously, it would make sense to replace them all and then see what happens. Am I looking in the correct folder btw - I'm on Windows 7 - it's a hidden directory - on the C: root directory - ProgramData/Ableton/(at work forgot the rest)/Resources/Midi_RemoteScripts/_generic/Devices/py. Guess this must be it.
Me too! The Sampler mapping was unusable for sound design, that's actually why I even started this endeavor.Regardless, thanks for all the research guys - I would LOVE to change the default Live device parameters - especially Sampler.
I wouldn't get my hopes up for M4L devices yet, they must be dealt with in some other file, as I don't find much about M4L in this oneAlso M4L's drumsynths. I just don't understand why Ableton made such odd decisions when we've got a total of 16 whole banks for each device to use, yet they only bothered using 8 at most. Rushed perhaps? Either way, I'm glad it's possible to change the default.
Agreed!!!On another note - maybe they can simply add a "configure" option like we have with VSTs - then we could easily set any Live device as we see fit without resorting to text files.
,Code: Select all
ALG_BANK1 = ('OSC1 Level', 'OSC1 Octave', 'OSC1 Semi', 'OSC1 Detune', 'OSC1 Shape', 'OSC1 Balance', 'PEG1 Amount', 'PEG1 Time')
ALG_BANK2 = ('F1 Type', 'F1 Freq', 'F1 Resonance', 'F1 To F2', 'FEG1 Attack', 'FEG1 Decay', 'FEG1 Sustain', 'FEG1 Rel')
ALG_BANK3 = ('AMP1 Level'', 'AMP1 Pan', 'AEG1 S Time', 'AEG1 Loop', 'AEG1 Attack', 'AEG1 Decay', 'AEG1 Sustain', 'AEG1 Rel')
ALG_BANK4 = ('LFO1 Shape', 'LFO1 Sync', 'LFO1 SncRate', 'LFO1 Speed', 'LFO1 PW', 'LFO1 Phase', 'LFO1 Delay', 'LFO1 Fade In')
ALG_BANK5 = ('OSC2 Level', 'OSC2 Octave', 'OSC2 Semi', 'OSC2 Detune', 'OSC2 Shape', 'OSC2 Balance', 'PEG2 Amount', 'PEG2 Time')
ALG_BANK6 = ('F2 Type', 'F2 Freq', 'F2 Resonance', 'F2 Slave', 'FEG2 Attack', 'FEG2 Decay', 'FEG2 Sustain', 'FEG2 Rel')
ALG_BANK7 = ('AMP2 Level'', 'AMP2 Pan', 'AEG2 S Time', 'AEG2 Loop', 'AEG2 Attack', 'AEG2 Decay', 'AEG2 Sustain', 'AEG2 Rel')
ALG_BANK8 = ('LFO2 Shape', 'LFO2 Sync', 'LFO2 SncRate', 'LFO2 Speed', 'LFO2 PW', 'LFO2 Phase', 'LFO2 Delay', 'LFO2 Fade In')
ALG_BANK9 = ('OSC1 < LFO', 'OSC1 PW', 'O1 PW < LFO', 'LFO1 On/Off', 'F1 Freq < LFO', 'F1 Res < LFO', 'A1 Pan < LFO', 'AMP1 < LFO')
ALG_BANK10 = ('OSC2 < LFO', 'OSC2 PW', 'O2 PW < LFO', 'LFO2 On/Off', 'F2 Freq < LFO', 'F2 Res < LFO', 'A2 Pan < LFO', 'AMP2 < LFO')
ALG_BANK11 = ('Noise On/Off', 'Noise Level', 'Noise Balance', 'Noise Color', 'O1 Sub/Sync', 'O2 Sub/Sync', 'F1 Drive', 'F2 Drive')
ALG_BANK12 = ('Vib On/Off', 'Vib Amount', 'Vib Speed', 'Vib Delay', 'Vib Error', 'Vib Fade-In', 'Vib < ModWh', 'Volume')
ALG_BANK13 = ('Unison On/Off', 'Unison Detune', 'Unison Delay, 'Unison Voices', 'Glide On/Off', 'Glide Time', 'Glide Legato', 'Glide Mode')
ALG_BOB = ('OSC1 Level', 'OSC1 Semi', 'OSC1 Balance', 'F1 Freq', 'OSC2 Level', 'OSC2 Semi', 'OSC2 Balance', 'F2 Freq')
ALG_BANKS = (ALG_BANK1,
ALG_BANK2,
ALG_BANK3,
ALG_BANK4,
ALG_BANK5,
ALG_BANK6,
ALG_BANK7,
ALG_BANK8,
ALG_BANK9,
ALG_BANK10,
ALG_BANK11,
ALG_BANK12,
ALG_BANK13)
ALG_BOBS = (ALG_BOB,)
ALG_BNK_NAMES = ('Oscillator 1', 'Filter 1', 'Amp 1', 'LFO 1', 'Oscillator 2', 'Filter 2', 'Amp 2', 'LFO 2', 'LFO 1 Routing', 'LFO 2 Routing', 'Noise Sub Drive', 'Vibrato', 'Unison Glide')A few lines had extra quotation marks. Notepad++ is a great free text editor that supports common programming languagesALG_BANK1 = ('OSC1 Level', 'OSC1 Octave', 'OSC1 Semi', 'OSC1 Detune', 'OSC1 Shape', 'OSC1 Balance', 'PEG1 Amount', 'PEG1 Time')
ALG_BANK2 = ('F1 Type', 'F1 Freq', 'F1 Resonance', 'F1 To F2', 'FEG1 Attack', 'FEG1 Decay', 'FEG1 Sustain', 'FEG1 Rel')
ALG_BANK3 = ('AMP1 Level', 'AMP1 Pan', 'AEG1 S Time', 'AEG1 Loop', 'AEG1 Attack', 'AEG1 Decay', 'AEG1 Sustain', 'AEG1 Rel')
ALG_BANK4 = ('LFO1 Shape', 'LFO1 Sync', 'LFO1 SncRate', 'LFO1 Speed', 'LFO1 PW', 'LFO1 Phase', 'LFO1 Delay', 'LFO1 Fade In')
ALG_BANK5 = ('OSC2 Level', 'OSC2 Octave', 'OSC2 Semi', 'OSC2 Detune', 'OSC2 Shape', 'OSC2 Balance', 'PEG2 Amount', 'PEG2 Time')
ALG_BANK6 = ('F2 Type', 'F2 Freq', 'F2 Resonance', 'F2 Slave', 'FEG2 Attack', 'FEG2 Decay', 'FEG2 Sustain', 'FEG2 Rel')
ALG_BANK7 = ('AMP2 Level', 'AMP2 Pan', 'AEG2 S Time', 'AEG2 Loop', 'AEG2 Attack', 'AEG2 Decay', 'AEG2 Sustain', 'AEG2 Rel')
ALG_BANK8 = ('LFO2 Shape', 'LFO2 Sync', 'LFO2 SncRate', 'LFO2 Speed', 'LFO2 PW', 'LFO2 Phase', 'LFO2 Delay', 'LFO2 Fade In')
ALG_BANK9 = ('OSC1 < LFO', 'OSC1 PW', 'O1 PW < LFO', 'LFO1 On/Off', 'F1 Freq < LFO', 'F1 Res < LFO', 'A1 Pan < LFO', 'AMP1 < LFO')
ALG_BANK10 = ('OSC2 < LFO', 'OSC2 PW', 'O2 PW < LFO', 'LFO2 On/Off', 'F2 Freq < LFO', 'F2 Res < LFO', 'A2 Pan < LFO', 'AMP2 < LFO')
ALG_BANK11 = ('Noise On/Off', 'Noise Level', 'Noise Balance', 'Noise Color', 'O1 Sub/Sync', 'O2 Sub/Sync', 'F1 Drive', 'F2 Drive')
ALG_BANK12 = ('Vib On/Off', 'Vib Amount', 'Vib Speed', 'Vib Delay', 'Vib Error', 'Vib Fade-In', 'Vib < ModWh', 'Volume')
ALG_BANK13 = ('Unison On/Off', 'Unison Detune', 'Unison Delay', 'Unison Voices', 'Glide On/Off', 'Glide Time', 'Glide Legato', 'Glide Mode')
ALG_BOB = ('OSC1 Level', 'OSC1 Semi', 'OSC1 Balance', 'F1 Freq', 'OSC2 Level', 'OSC2 Semi', 'OSC2 Balance', 'F2 Freq')
ALG_BANKS = (ALG_BANK1,
ALG_BANK2,
ALG_BANK3,
ALG_BANK4,
ALG_BANK5,
ALG_BANK6,
ALG_BANK7,
ALG_BANK8,
ALG_BANK9,
ALG_BANK10,
ALG_BANK11,
ALG_BANK12,
ALG_BANK13)
ALG_BOBS = (ALG_BOB,)
ALG_BNK_NAMES = ('Oscillator 1', 'Filter 1', 'Amp 1', 'LFO 1', 'Oscillator 2', 'Filter 2', 'Amp 2', 'LFO 2', 'LFO 1 Routing', 'LFO 2 Routing', 'Noise Sub Drive', 'Vibrato', 'Unison Glide')
You mean they gave errors in your log, even though nobody messed with these files?shadx312 wrote:Right, well, the log is giving errors to related scripts ie GenericScript.py & GenericDeviceControl.py so I'm checking it out but can't play around for too much longer.
