Page 1 of 1
do i need two separate midi buttons to turn a device on off?
Posted: Sat Jan 31, 2009 6:04 pm
by Jaan
i'm trying to assign a midi control on my xsession pro to beat repeat on/off... but it only turns it on, and doesn't turn it off...
how do i get a midi button to be an on AND off switch?
cheers
Posted: Sat Jan 31, 2009 6:11 pm
by sporkles
Just make sure it's set up to toggle on/off. I think the usual method is to set
0 as lowest value and 127 as highest. I think that should work; check your
mapping settings in Live to see what it wants
Posted: Sat Jan 31, 2009 6:16 pm
by Jaan
how do i set it to toggle?
setting it to min 0 and max 127 doesn't work =\
Posted: Sat Jan 31, 2009 7:00 pm
by Homebelly
Its a hardware thing..
the actual controller needs to be set up as toggle.
What hard ware are you using?
Posted: Sat Jan 31, 2009 7:03 pm
by Jaan
m audio x session pro with a bcd3000, audio interface is a presonus firebox
edit: fixed, i had to make a new preset on m audio enigma software, then upload it onto the x session... then CCs were interfering with the BCD so i had to redo the preset and change the midi channel... but i had an awesome DJ session!