M4L Launchpad Sequencers and User2 Mode not working
M4L Launchpad Sequencers and User2 Mode not working
I've been working on a Step Sequencer for the Lauchpad in Live 8. Sequencer doesn't work properly in Live 9 anymore.
The Problem is that no MIDI messages are sent to Live in USER2 Mode.
The current state of the sequencer is displayed on the Lauchpad but pressing any buttons has not effect.
This is not just the case with my own Step Sequencer but also the Sonic Faction Hatchet Step Sequencer and the Launchpad Sequencer from Novation themselves.
The Problem is that no MIDI messages are sent to Live in USER2 Mode.
The current state of the sequencer is displayed on the Lauchpad but pressing any buttons has not effect.
This is not just the case with my own Step Sequencer but also the Sonic Faction Hatchet Step Sequencer and the Launchpad Sequencer from Novation themselves.
Re: M4L Launchpad Sequencers and User2 Mode not working
Whew. I thought this was just me.
Re: M4L Launchpad Sequencers and User2 Mode not working
Navigate within the patch and find any elements that a looking for a 1 or 0, these need to read a 127 or 0... This is due to the velocity sensitivity introduced with the Push...
Both of the devices you mention are not Ableton devices so you are better off directing your queries to the designers of them...
Cheers
D
Both of the devices you mention are not Ableton devices so you are better off directing your queries to the designers of them...
Cheers
D
Re: M4L Launchpad Sequencers and User2 Mode not working
Thanx a lot, Sequencer is up and running again.S4racen wrote:Navigate within the patch and find any elements that a looking for a 1 or 0, these need to read a 127 or 0... This is due to the velocity sensitivity introduced with the Push...
D
-
- Posts: 2
- Joined: Thu Feb 21, 2013 12:11 pm
Re: M4L Launchpad Sequencers and User2 Mode not working
I didn't understand what need to change
Re: M4L Launchpad Sequencers and User2 Mode not working
bonjour.
same problem for me ...
and i don.t find the place to change 0 and 1 to 127 and 0 ...
help !!
merci
same problem for me ...
and i don.t find the place to change 0 and 1 to 127 and 0 ...
help !!
merci
-
- Posts: 1193
- Joined: Sat Apr 24, 2010 11:20 am
- Location: Fredericksburg, VA
Re: M4L Launchpad Sequencers and User2 Mode not working
Thanks Darren, marked for future reference...S4racen wrote:Navigate within the patch and find any elements that a looking for a 1 or 0, these need to read a 127 or 0... This is due to the velocity sensitivity introduced with the Push...
Both of the devices you mention are not Ableton devices so you are better off directing your queries to the designers of them...
Cheers
D
Ableton Live Suite | M4L | Powerbook | Launchpad | APC40 | Faderfox | 2x1200 | Xone:96 | ...Funk N. Furter wrote:Post properly.
---> http://soundcloud.com/kilcraft
-
- Posts: 218
- Joined: Sat Jan 29, 2005 6:59 pm
- Location: toronto
- Contact:
Re: M4L Launchpad Sequencers and User2 Mode not working
hi - same problem running live 9.0.3 on a mac. it seems to me that the launchpad should sort of qualify as an ableton device, btw...the unit carries their logo on it.