Page 1 of 1
Wireless Push
Posted: Mon Jul 07, 2014 12:05 pm
by dacoutu
Does exist any wireless sytem to ableton push ?
I mean if you plug push with AC/DC adapter and a wireless sytem for information.
Re: Wireless Push
Posted: Thu Jul 10, 2014 2:50 am
by Buleriachk
Re: Wireless Push
Posted: Thu Jul 10, 2014 7:41 am
by dacoutu
Cool
There are this for QuNeo
http://www.keithmcmillen.com/rogue/tour
It s very good product.
Today, lots of controller have just usb connection (like push). And it doesn't exist wireless usb system.
It s probably very difficult to make it because each controller get his own protocole.
I hope ableton make something in this way.
It s the futur .......
Re: Wireless Push
Posted: Wed Jul 16, 2014 2:38 am
by LukeJoseph
Not wireless. But have you thought about usb over cat5 adapter? Yes it's still a cable, but you can run it much further and cat5 is one of the easiest cables to work with on stage.
Re: Wireless Push
Posted: Mon Jul 28, 2014 12:12 pm
by Tagor
Looks promising, but properly will not do tje job...ask them for usb inputs
Wirelessly use any and all past, present, and future MIDI equipped devices! The AirPower2 MIDI transmitter from Starr Labs operates in the 2.4GHz range, giving the instrument an unobstructed range of 250 feet. The AirPower2 has built-in dropout protection and recovery for settings where obstructions and reflections are a problem. No more stuck notes! The AirPower2 Wireless MIDI System seamlessly recovers from momentary dropouts in transmission.
Sixteen user-selectable channel spaced across the 2.4GHz band allow several AirPower2 links to operate on the same stage. The AirPower2 receiver is equipped with both MIDI and USB output for direct connection to a PC, Mac, Ipad, or Android device. Both USB and MIDI outputs can be used simultaneously. Perfect for studio and stage applications where MIDI cables just won't cut it!
