Push 3: Can't change headphone volume

Discuss Push with other users.
eclipxe
Posts: 96
Joined: Thu Dec 27, 2007 2:27 am

Push 3: Can't change headphone volume

Post by eclipxe » Sat May 27, 2023 5:23 am

Anyone else see this? Clicking the master volume encoder doesn't change the outputs for me. I can just change the main outs, not headphone volume.

kamiza
Posts: 2
Joined: Sat May 27, 2023 8:42 am

Re: Push 3: Can't change headphone volume

Post by kamiza » Sat May 27, 2023 8:43 am

Same here with the controller Version of push3.

[jur]
Site Admin
Posts: 5275
Joined: Mon Jun 01, 2015 3:04 pm
Location: Ableton

Re: Push 3: Can't change headphone volume

Post by [jur] » Sat May 27, 2023 1:09 pm

Don't forget that Cue and Headphones aren't necessary the same depending on your setup. Just saying as I personally remember being confused a few times.
Ableton Forum Moderator

eclipxe
Posts: 96
Joined: Thu Dec 27, 2007 2:27 am

Re: Push 3: Can't change headphone volume

Post by eclipxe » Sat May 27, 2023 1:38 pm

Yep - but pressing the volume encoder does nothing. I can’t select different outputs at all to change volume.

[jur]
Site Admin
Posts: 5275
Joined: Mon Jun 01, 2015 3:04 pm
Location: Ableton

Re: Push 3: Can't change headphone volume

Post by [jur] » Sat May 27, 2023 1:46 pm

eclipxe wrote:
Sat May 27, 2023 1:38 pm
Yep - but pressing the volume encoder does nothing. I can’t select different outputs at all to change volume.
Oh, ok...
Did you update it too v1.1, or are you still on the factory version?
Ableton Forum Moderator

mayabong
Posts: 116
Joined: Sat Oct 30, 2010 4:52 pm

Re: Push 3: Can't change headphone volume

Post by mayabong » Sat May 27, 2023 1:56 pm

I've noticed that it doesn't show on the screen when the screen is on certain things. I will try to recreate it. It would still raise and lower the volume but you couldn't see which volume you were raising.

eclipxe
Posts: 96
Joined: Thu Dec 27, 2007 2:27 am

Re: Push 3: Can't change headphone volume

Post by eclipxe » Sat May 27, 2023 2:10 pm

[jur] wrote:
Sat May 27, 2023 1:46 pm
eclipxe wrote:
Sat May 27, 2023 1:38 pm
Yep - but pressing the volume encoder does nothing. I can’t select different outputs at all to change volume.
Oh, ok...
Did you update it too v1.1, or are you still on the factory version?
Yep on 1.1. Did. A factory reset and problem is still there. I sure hope my hardware isn’t broken :-(

ampush3user
Posts: 20
Joined: Sat May 27, 2023 4:22 pm

Re: Push 3: Can't change headphone volume

Post by ampush3user » Sun May 28, 2023 12:46 pm

You have to press the encoder down to change it to headphone

102455
Posts: 1729
Joined: Sat Nov 21, 2009 1:41 pm
Location: UK
Contact:

Re: Push 3: Can't change headphone volume

Post by 102455 » Sun May 28, 2023 2:09 pm

He already said pressing the encoder does nothing...

ampush3user
Posts: 20
Joined: Sat May 27, 2023 4:22 pm

Re: Push 3: Can't change headphone volume

Post by ampush3user » Sun May 28, 2023 2:12 pm

he said click? edit - also seen he said pressed :lol:

102455
Posts: 1729
Joined: Sat Nov 21, 2009 1:41 pm
Location: UK
Contact:

Re: Push 3: Can't change headphone volume

Post by 102455 » Sun May 28, 2023 2:25 pm

It only clicks when you press it :-)

BTW did any else fail to get the startup tutorial when first powering up their Push?

The first thing mine did was display that "unexpectedly quit" message about recoving a previous project. It was fresh out of the box! Then apparently it's supposed to go to the welcome screen. Mine didn't do that.

[jur]
Site Admin
Posts: 5275
Joined: Mon Jun 01, 2015 3:04 pm
Location: Ableton

Re: Push 3: Can't change headphone volume

Post by [jur] » Sun May 28, 2023 3:31 pm

102455 wrote:
Sun May 28, 2023 2:25 pm
The first thing mine did was display that "unexpectedly quit" message about recoving a previous project. It was fresh out of the box! Then apparently it's supposed to go to the welcome screen. Mine didn't do that.
That for sure is surprising, but it is working now, right?
Make sure to update to v1.1 asap. The factory software version isn't stable enough.
Ableton Forum Moderator

102455
Posts: 1729
Joined: Sat Nov 21, 2009 1:41 pm
Location: UK
Contact:

Re: Push 3: Can't change headphone volume

Post by 102455 » Sun May 28, 2023 5:08 pm

Yes, I updated immediately after connecting to wifi, and it seems to be behaving itself now.

I quite like the automated file naming when saving :-)

cjonesnyc
Posts: 35
Joined: Sat Jul 03, 2010 11:11 am

Re: Push 3: Can't change headphone volume

Post by cjonesnyc » Tue May 30, 2023 3:22 pm

I have the same problem, it only changes if i push down a lot harder and hold for about 2 seconds and let go. It was instant the first few times I switched between them. I updated to 1.1 before this even started happening
Last edited by cjonesnyc on Tue May 30, 2023 4:19 pm, edited 1 time in total.

[jur]
Site Admin
Posts: 5275
Joined: Mon Jun 01, 2015 3:04 pm
Location: Ableton

Re: Push 3: Can't change headphone volume

Post by [jur] » Tue May 30, 2023 4:19 pm

cjonesnyc wrote:
Tue May 30, 2023 3:22 pm
I have the same problem, it only changes if i push down a lot harder and hold for about 2 seconds and let go. It was instant the first few times I switched between them.
Did you update to v1.1?
Ableton Forum Moderator

Post Reply