Ableton Forum

Hey, first of all, it's my first push and I love it.

I bought the standalone version mainly as my new possible center piece for all my gear — Ableton live, hardware and modular — as Ableton says; The heart of your setup.

Bud sadly I can't use it with my modular because of CV Instruments in standalone. I calibrated my VCOs in controller mode (it's not possible in standalone. no problem). I also have to define the audio routing in controller mode because it's not possible to select ADAT 9/10 in standalone. In stand alone you are only able to choose mono channels. Also fine. I did it in controller mode and safed the devices in my user library on push.

But back in standalone mode loading my CV Instrument device everything is at least 6 octaves higher. Not usable at all. I searched for that problem but didn't find anything. Is it working with your setup?

I'm not able to test it with the CV output because it's not possible to buy the needed adapters from Ableton and couldn't find them anywhere else.

My ADAT modules are the Expert Sleepers ES-3/ES-6 combo.

Hey, no one else has this problem?

Are you using the latest version of the CV Tools pack?
(I'm not saying it'll solve your issues, I'm just curious)

[jur] wrote: ↑

Mon Jul 03, 2023 10:48 am

Are you using the latest version of the CV Tools pack?
(I'm not saying it'll solve your issues, I'm just curious)

I guess so. I'm using Live 11.3.10b2 and Push 1.1.10b2.

invertednothing wrote: ↑

Tue Jul 04, 2023 12:40 am

[jur] wrote: ↑

Mon Jul 03, 2023 10:48 am

Are you using the latest version of the CV Tools pack?
(I'm not saying it'll solve your issues, I'm just curious)

I guess so. I'm using Live 11.3.10b2 and Push 1.1.10b2.

Packs are updated individually and separately via the standalone Push.

elbows wrote: ↑

Tue Jul 04, 2023 12:13 pm

invertednothing wrote: ↑

Tue Jul 04, 2023 12:40 am

[jur] wrote: ↑

Mon Jul 03, 2023 10:48 am

Are you using the latest version of the CV Tools pack?
(I'm not saying it'll solve your issues, I'm just curious)

I guess so. I'm using Live 11.3.10b2 and Push 1.1.10b2.

Packs are updated individually and separately via the standalone Push.

Ah! I'll check it. Thanks

invertednothing wrote: ↑

Tue Jul 04, 2023 5:02 pm

elbows wrote: ↑

Tue Jul 04, 2023 12:13 pm

invertednothing wrote: ↑

Tue Jul 04, 2023 12:40 am

I guess so. I'm using Live 11.3.10b2 and Push 1.1.10b2.

Packs are updated individually and separately via the standalone Push.

Ah! I'll check it. Thanks

No available updates

Hey, does nobody has this problem? Or is nobody using the push3 standalone with CV tools? I still have the problem. I'm on the news beta b20 and it do not work with ADAT or the CV outs. It's alway way too high pitched. I have no idea

invertednothing wrote: ↑

Fri Oct 27, 2023 7:08 pm

Hey, does nobody has this problem? Or is nobody using the push3 standalone with CV tools? I still have the problem. I'm on the news beta b20 and it do not work with ADAT or the CV outs. It's alway way too high pitched. I have no idea

Did you report to Support?
Sorry, I've no ADAT device to try this out.

We already figured out the cause on this thread:

viewtopic.php?t=247339#p1817500

(unipolar, as demonstrated by the fact pitch will be the same using normal Live too if you set the pitch cv outs to unipolar there)

elbows wrote: ↑

Mon Nov 13, 2023 12:26 pm

We already figured out the cause on this thread:

viewtopic.php?t=247339#p1817500

(unipolar, as demonstrated by the fact pitch will be the same using normal Live too if you set the pitch cv outs to unipolar there)

yes. Sad but true. I use cv tools (very rarely) just for modulation now and cv clock out. I bought a Midi to CV converter for trigger/pitch and couldn't be happier. Actually unnecessary if cv instruments would work. But it is what it is