Send Midi CC from Standalone?
-
- Posts: 7
- Joined: Tue Jul 16, 2013 12:35 am
Send Midi CC from Standalone?
Has anyone figured out how to send Midi CC data from Standalone? It's implemented as an envelope in Ableton but it's not available on Standalone.
I've tried most of the Max For Live devices that could help but none of them are compatible.
Hope someone has an answer, without Midi CC data it's very difficult to use the Push as a brain for a hardware setup.
I've tried most of the Max For Live devices that could help but none of them are compatible.
Hope someone has an answer, without Midi CC data it's very difficult to use the Push as a brain for a hardware setup.
-
- Posts: 6073
- Joined: Mon May 15, 2006 12:15 pm
Re: Send Midi CC from Standalone?
Really, none of the ones in maxforlive.com is compatible ?
I just received my Push and started to add Push control on my m4l devices, so I could do this as well !
I just received my Push and started to add Push control on my m4l devices, so I could do this as well !
MacBook Pro 13" Retina i7 2.8 GHz OS 10.13, L10.0.1, M4L.
MacStudio M1Max 32Go OS 12.3.1
MacStudio M1Max 32Go OS 12.3.1
-
- Posts: 7
- Joined: Tue Jul 16, 2013 12:35 am
Re: Send Midi CC from Standalone?
Here's a short list of incompatible devices that I've tried:
I'll keep updating this post as I try more.
I'll keep updating this post as I try more.
-
- Posts: 3
- Joined: Wed Jul 26, 2023 9:35 pm
Re: Send Midi CC from Standalone?
Happy to report that ControlChange8.5 works great. 8 values per device easily assignable right from the Push. Just tested with Digitakt.
Re: Send Midi CC from Standalone?
How are you getting this to work? I have the device in both user libraries and I configured the CCs (and set names in the notes field) in desktop Live, but on standalone, I just see "Parameter 1" through "Parameter 8", with params 1-4 at 0 and 5-8 at 64. It doesn't look like any of my CC assignments or m4l device settings are getting transferred to Push.Polymyth.PM wrote: ↑Wed Jul 26, 2023 10:18 pmHappy to report that ControlChange8.5 works great. 8 values per device easily assignable right from the Push. Just tested with Digitakt.
-
- Posts: 3
- Joined: Wed Jul 26, 2023 9:35 pm
Re: Send Midi CC from Standalone?
Clicking on the ControlChange device an additional time should bring up more options at the bottom of the display. iirc the second tab over should have the 8 assignable values. Wish I could be more descriptive, but I’m not with the Push atm.
Re: Send Midi CC from Standalone?
Following up to say that this device works! My only remaining issue with this workflow as it is now is that none of the controller assignments can be labeled on the Push. (The device allows for renaming of controllers in Desktop Live, but these configurations are not transferred over to Push Standalone when the device or a project is transferred over.)Polymyth.PM wrote: ↑Fri Jul 28, 2023 10:28 amClicking on the ControlChange device an additional time should bring up more options at the bottom of the display. iirc the second tab over should have the 8 assignable values. Wish I could be more descriptive, but I’m not with the Push atm.
Would really appreciate something a little more put together by the Ableton team, but in the meantime, this fills the gap!
-
- Posts: 6073
- Joined: Mon May 15, 2006 12:15 pm
Re: Send Midi CC from Standalone?
[live.banks] allows dynamic renaming of parameters if I’m not mistaken. So it might be possible. (Can’t check, on holidays)
MacBook Pro 13" Retina i7 2.8 GHz OS 10.13, L10.0.1, M4L.
MacStudio M1Max 32Go OS 12.3.1
MacStudio M1Max 32Go OS 12.3.1