Page 1 of 2
Noise when opening project P3(s)
Posted: Sun Sep 24, 2023 7:54 pm
by wesslan_2049
When opening a project in standalone mode Push 3 sometimes outputs noise, something in between white noise and digital artefacts noise.
Is this a known bug?
Also, MIDI goes bananas, I noticed one external unit going stroboscopic all over the LED's.
(This bug has turned up at least twice for me today. There is no way of stopping it but to restart. The noise starts immediately upon project load completion. Pressing play, stop, etc makes no difference. Fw 1.1.11)
Re: Noise when opening project P3(s)
Posted: Sun Sep 24, 2023 9:00 pm
by [jur]
I never experienced this.
Are the noise and MIDI thing happening simultaneously?
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 1:17 pm
by wesslan_2049
[jur] wrote: ↑Sun Sep 24, 2023 9:00 pm
I never experienced this.
Are the noise and MIDI thing happening simultaneously?
Yes.
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 2:28 pm
by [jur]
Did you try with no external gear plugged in?
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 2:57 pm
by wesslan_2049
[jur] wrote: ↑Mon Sep 25, 2023 2:28 pm
Did you try with no external gear plugged in?
I tried disconnecting everything, but the noise continued.
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 2:59 pm
by wesslan_2049
It happened again just a minute ago. Restarted Push 3(s) and it disappeared. For now.
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 3:00 pm
by wesslan_2049
[jur] wrote: ↑Mon Sep 25, 2023 2:28 pm
Did you try with no external gear plugged in?
All external gear was turned off last time it happened.
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 3:02 pm
by [jur]
Hmm, sounds like you need to contact
Support...
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 3:21 pm
by wesslan_2049
[jur] wrote: ↑Mon Sep 25, 2023 3:02 pm
Hmm, sounds like you need to contact
Support...
OK
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 3:38 pm
by wesslan_2049
[jur] wrote: ↑Mon Sep 25, 2023 3:02 pm
Hmm, sounds like you need to contact
Support...
Done!
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 7:04 pm
by [jur]
Are you using any ADAT with on top of the builtin interface?
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 7:14 pm
by wesslan_2049
[jur] wrote: ↑Mon Sep 25, 2023 7:04 pm
Are you using any ADAT with on top of the builtin interface?
No ADAT at this point. Only the built in interface only so far.
I've bought the ADAT expander EVO SP8, got it delivered today, packed it up but haven't connected it to P3(s) yet. I want to get my P3(s) going properly first.
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 8:44 pm
by [jur]
Would be interesting if you had access to a computer to check how it goes when using its audio interface when Tethered.
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 9:49 pm
by wesslan_2049
[jur] wrote: ↑Mon Sep 25, 2023 8:44 pm
Would be interesting if you had access to a computer to check how it goes when using its audio interface when Tethered.
I see! However a bit off-topic for the purpose I had this thread (standalone usage), but feel free to message me directly!
Re: Noise when opening project P3(s)
Posted: Mon Sep 25, 2023 10:20 pm
by wesslan_2049
[jur] wrote: ↑Mon Sep 25, 2023 8:44 pm
Would be interesting if you had access to a computer to check how it goes when using its audio interface when Tethered.
@jur I have sent you a response message, in a PM, please respond so that I know if it reached you all right!