Page 1 of 1
Using Digi OO2 to record into Live 4 (without Rewire)
Posted: Sat Feb 25, 2006 7:41 pm
by BlueRidge
I'm trying to use the mic's and synths that are plugged into my Digi 002 control surface to record into Live without rewiring it thru ProTools.
I can record into PT fine, but if I boot up Live without protools, the console seems to indicate it can "hear" my synths and 'see" the Midi, but i can't get Live to see and hear it.
Any help would be appreciated.
Mac G5 duo 2.0
Live 4
PT LE 6.4 002 console
Reason 3.0
Posted: Sat Feb 25, 2006 7:51 pm
by ben_blue
make sure lives audio pref is set to the digi asio drivers ( i think.)
then click input config on same page to activate the hardware inputs, which prolly were not activate since you may not have used them in live before.
then for each track, you will have those available as choices for input.
/ben b
Posted: Sat Feb 25, 2006 9:48 pm
by mike holiday
no asio for mac
also you can select the input in the track chanel strip (similer to PT)
if your inputs arn't configured yet you will see "configure" in the drop down menu
also make sure you trun the tracks monitor mode to "on"
this will alow the audio to play through the track in live
Posted: Sat Feb 25, 2006 10:21 pm
by BlueRidge
Thanks, Mike and Ben -- Live is smarter than I thought; in Audio Preferences, it asks you at the bottom of the dialogue to conigure 1/2, 3/4, etc -- and my Korg was 5/6 -- which I hadn't checked.
I hadn't expected Live to detect all 18 of Digi's 002 outputs but it does, and receives them.
Thanks for your help, it sent me back to the tright page.
Blueridge.
Posted: Sun Feb 26, 2006 8:26 pm
by mike holiday
BlueRidge wrote: Live is smarter than I thought.
Posted: Mon Feb 27, 2006 1:08 am
by ben_blue
but, are mike and ben smarter than we thought as well?
this is the real question at hand.
Re: Using Digi OO2 to record into Live 4 (without Rewire)
Posted: Mon Feb 27, 2006 1:24 am
by gomi
BlueRidge wrote:I'm trying to use the mic's and synths that are plugged into my Digi 002 control surface to record into Live without rewiring it thru ProTools.
I can record into PT fine, but if I boot up Live without protools, the console seems to indicate it can "hear" my synths and 'see" the Midi, but i can't get Live to see and hear it.
Any help would be appreciated.
Mac G5 duo 2.0
Live 4
PT LE 6.4 002 console
Reason 3.0
make sure live in in your list of available apps in the digicore audio manager.
if you are running the version 6.4 you have to manually add apps to it for them
to work with the driver.
update the digicore audio driver to 6.5.2 (that still works with protools 6.4) and
you won't have to manually add apps anymore.